Questions & Answers - Recent activity

Commented: Starter issues

Tue, 21 Jul 2026 17:51:10 +0000

I won't be in here if there's not an issue now I believe there's an issue either with the harness itself or the module because after 6 or so months into using the remote start I had to change the starter it just went bad after install and used also noticing the noises coming from the hood after remote smart in the area where the starter I located I'm serious about this because I have to use the vehicle to go to a lot of doctors appointments

Does the Evo All have the ability to close that hatch on my 2014 audi sq5.

Tue, 21 Jul 2026 17:35:20 +0000

Does the evo module have the capabiltiy to close then rear hatch after it is opens from the driver door switch.

Answered: Why is the vehicle not responding?

Mon, 20 Jul 2026 12:30:18 +0000

Hello,

Sounds like the evo start lte was not paired to the evo-all. Also make sure option H2 was enabled in the evo-all for the evo start lte.

In vehicle pairing procedure (page 15): https://cdn02.fortin.ca/download/102151/EVO-ONE_IG_EVO-START_QUICK-GUIDE_G_102151.pdf

Best regards

Answered: More of a Suggestion for an Ammendment

Mon, 20 Jul 2026 12:21:46 +0000

Hello,

Thank you for your feedback, I will submit it to our graphics department for them to have a look and possibly make the changes you have suggested.

Best regards

Answered: THAR-ONE-MAZ5

Fri, 17 Jul 2026 12:09:01 +0000

Hello,

When using the thar-one-maz5 you will not need any diodes or relay.

Best regards

Commented: Skoda superb 2017 keyless

Fri, 17 Jul 2026 12:07:09 +0000

As previously stated that vehicle (skoda superb) does not exist in North America.

I will advise you of the parts required for a 2017 VW Golf with Push button start and automatic transmission and you can decide at your own discrection if you want to try it. No guarantee that it will work.

You would need the following parts for remote start using the OEM remote:

- evo-vwt1

- flash link updater

- r-link

Please note immobilizer bypass is not available on vehicles equipped with a virtual cluster, you would need to sacrifice a key for those vehicles.

https://fortin.ca/en/vehicles/volkswagen/golf/2017-push-to-start/compatibility/

Best regards

Commented: install remote-starter in volkswagen touareg 7l 2008

Thu, 16 Jul 2026 19:38:01 +0000

Evo-all only offers can bus convenience features, such as brake status, tach status etc.

If you scroll down you will see under installation highlights there is a warning for "Remote starter solution not available. module used for convenience features only."

https://fortin.ca/en/vehicles/volkswagen/touareg/2008-standard-key/compatibility/

Best regards

Answered: EVO-ONE Installation in CAMRY 2026

Mon, 13 Jul 2026 13:46:06 +0000

1. Imi must be cut. The module is taking over temporatily providing key data.

2. the 54-pin is simply a connector located in the vheicle. It has no specific purpose aside from routing wires in the vehicle.

3. The ECU is where the t-harness connects to. It provides CAN and ignition/starter circuits. The wire-to-wire guide shows which circuits are being used at the ECU. https://fortin.ca/download/118441/EVO-ONE_IG_REG_BI_TOY-CAMRY-HYBRID_PTS_2025_A_118441.pdf

Answered: Flash limit reset?

Mon, 13 Jul 2026 13:41:07 +0000

I have attempted to reset the module but due to the flash restrictions within the flash link manager it may not allow this unit to be flashed anymore. Module over 5 years of age may not be flashed anymore

Answered: I need the flash limit reset for a evo all sn:001A07709281

Thu, 09 Jul 2026 17:40:55 +0000

The flash limit has been reset.

Answered: Hello my module is at a limit and needs to be reset SN: 001A07793670

Wed, 08 Jul 2026 13:40:15 +0000

The dcryptor reset has been requested. Please allow up to 24 hrs for it to process

Closed: Q50 not remote starting

Mon, 06 Jul 2026 21:14:13 +0000

i have a 2015 infiniti Q50

SN-002B04 759527

i installed the evo-one with thar-nis4 t harness and RF942 kit.

programmed, decrypted and reinstalled tested with oem keyfob worked great, than i programmed the 2 RF remotes, test again worked good 3 times then just stopped working. i can still unlock/lock with all 3 fobs. it will try to remote start, gets to where it should crank and nothing.

Commented: Mazda cx 30 shuts off after pressing the brake pedal

Mon, 06 Jul 2026 15:36:44 +0000

I believe it was mentionned via email, at the moment there is no solution to the differences on vehicles outside North America.

Answered: install Evo one on 2022 Toyota highlander

Thu, 02 Jul 2026 12:50:15 +0000

The installation of a remote starter on this vehicle requires an EVO-ONE (modules built since 2019 are all QR code). https://fortin.ca/en/vehicles/toyota/highlander/2022-push-to-start/compatibility/

There is no t-harness available, this is full wire to wire installation, information on wiring is available in the guide. We do suggest that all remote starter system be installed by a local shop familiar with aftermarket products such as remote starter systems.

Answered: Reset flash limit

Wed, 01 Jul 2026 12:28:03 +0000

The module has been reset.

Commented: 2007 MDX parking lights not turning on when remote start

Tue, 30 Jun 2026 03:21:08 +0000

Thank you. The E1 brown wire did the trick.

Answered: Is the OEM key supported by EVO ONE on a 2021 Mitsubishi Outlander Sport keyed ignition, auto trans

Mon, 29 Jun 2026 19:59:05 +0000

Control from the OEM remote is listed as a supported feature for this vehicle.

https://fortin.ca/en/vehicles/mitsubishi/outlander-sport-(usa)/2021-standard-key/compatibility/

Answered: Mazda cx 30 shuts off after pressing the brake pedal

Sun, 28 Jun 2026 13:26:31 +0000

Hi, did you resolve the issue? I bought the same module and have the same problem.

Commented: EVO-One starts then shuts off after 2 seconds

Fri, 26 Jun 2026 02:46:11 +0000

The solution for my 2017 Outback was to flip the immobilizer wires. I just cut the two wires near the Evo and flipped them. Starts/runs fine...

Answered: 2018 Subaru Outback Push-to-Start. Starts and runs but dies after a few seconds.

Fri, 26 Jun 2026 02:42:21 +0000

My 2017 same issue. reversed the immobilizer (flipped). Starts/runs fine.

Commented: Where else to tap for power

Thu, 25 Jun 2026 14:48:34 +0000

Yeah that would be fine as long as the module has a solid 12v and ground and the 12v is fused at 7.5A max.

Answered: 2016 Ford E450 6.8L V10 6R140 transmission, is there a solution for this vehicle?

Thu, 25 Jun 2026 13:02:02 +0000

Hello,

2016 E450 was never tetsed, often times these trucks didnt have any IMO meaning any analog remote starter would work.

First thing to verify is if it has a chip in the key.

If it does have a chip you could try it like an F series but that would be at your own discretion because as mentioned Fortin never tested these.

If it does not have a chip in the key any analog remote starter would work.

Best regards

Commented: 2024 Grand Highlander Dcryptor Procedure not working

Thu, 25 Jun 2026 12:40:40 +0000

Awesome glad that got it sorted for you, all the best!

Answered: Can I use a fortin evo-one remote start on an ‘01 Toyota Camry with an OEM remote?

Thu, 25 Jun 2026 12:40:09 +0000

Hello,

Yes you can use the evo-one for a 2001 Camry but no you cannot use the OEM remote to initiate remote start, an rf kit is required.

https://fortin.ca/en/vehicles/toyota/camry/2001-standard-key/compatibility/

Best regards

Answered: Reset Devices Resets

Thu, 25 Jun 2026 12:38:19 +0000

Hello,

I have reset the flash limit for you.

Best regards

Answered: Releasing product, who can I contact about pricing for business tokens

Mon, 22 Jun 2026 11:59:11 +0000

Hello,

You can try contacting sales@fortin.ca

Best regards

Answered: MG6 2020 (SAIC Motors)

Mon, 15 Jun 2026 12:22:24 +0000

Hello,

At this time Fortin does not offer any solutions for MG6, if a solution does become available the vehicle will be listed on https://fortin.ca/en/

Best regards

Commented: EVO-ALL cannot program sacrificied key in a standlone installation for Tiguan 2020 PTS

Mon, 15 Jun 2026 12:18:38 +0000

No, there is no output that will pulse the horn (either - or +) at remote start.

Glad you got it programmed and working.

Best regards

Answered: EVO-ALL locked - "The current device cannot be flashed anymore" error

Mon, 15 Jun 2026 12:15:49 +0000

Hello,

I have reset the flash limit for you.

Please note evo-mazt1 type installs will not allow the same module to be programmed to the same vehicle more than once. Meaning if this module was already successfully programmed to the car, you cannot re program it to the same car a 2nd time.

Best regards

Commented: 2017 Renegade

Sat, 13 Jun 2026 07:39:59 +0000

Yes, turning the ignition ON 10 times, helped. Thank you very much...

Commented: RFK942 antenna LED not blinking

Thu, 11 Jun 2026 12:05:57 +0000

Glad that got it going for you!

Answered: Evo Start 2 - Error the request returned an invalid code every time I try to use it

Wed, 10 Jun 2026 19:55:49 +0000

Hello,

Thank you for your patience while Fortin works to resolve the issue.

An update has been released for iPhone users uing the evo start 2 application.

Please go to your app store and search evo start 2, select the app and click on the blue update icon.

Best regards

Commented: Which Module do I Need for a 2018 Ford Mustang Manual Transmission

Wed, 10 Jun 2026 19:40:23 +0000

Please be aware that Fortin is based in Canada and tests its solutions on vehicles based for the NA market. Compatiblity with vehicles in other markets is not guarenteed, you can attempt the vehicle if you wish but it is at your own risk/discretion.

For purchasing you can refer to these links:

- https://fortin.ca/en/where-to-buy/installation/

- https://fortin.ca/en/where-to-buy/distributors/

or find it online through major online retailers such as amazon, ebay etc.

Best regards

Commented: 2019 Toyota Rav4 Push Start

Wed, 10 Jun 2026 12:14:30 +0000

Yes, the thar-toy13 is compatible with the 2019 rav4 pts.

Please note modules with a manufacture date of older than 5 years are not re configurable at the flash link.

https://fortin.ca/en/vehicles/toyota/rav4/2019-push-to-start/compatibility/

Best regards

Commented: 2017 IS-300

Tue, 09 Jun 2026 12:15:44 +0000

glad to hear, all the best.

Answered: Bought an evo-X-One for my 2015 Mitsubishi Lancer Evo X GSR manual transmission but it’s not working

Tue, 09 Jun 2026 12:08:52 +0000

Hello,

For a 2015 Lancer evolution with standard key you would need the following parts for remote start using the OEM remote:

- evo-one

- flash link updater

Please note Fortin does not assist end consumers who attempt to install on manual transmission vehicles, installation by a qualified technicaian is strongly recommended.

The evo-x-one is not supported for a 2015 lancer evo.

https://fortin.ca/en/vehicles/mitsubishi/lancer-evolution/2015-standard-key/compatibility/

Best regards

Answered: Reset All SERVICE # 002B04 753842

Mon, 08 Jun 2026 12:35:39 +0000

A dcryptor reset request has been sent in, this can take up to 24 hours.

Commented: 2020 Honda Civic auto-locking when closing door

Fri, 05 Jun 2026 18:56:58 +0000

If I push the stop/start when ready mode is engaged, it give me a keyless system error, that doesn't go away until I restart the car twice.

The proper method is like what I mentionned. The module takes care of pressing the PTS to shut down the car down.

1- Press on the brake
2- Engage the e-brake
3- Release the brake
4- Open a door and step out the car (with the key)

5a- Close door, remote starter shuts down and shuts down vehicle.

5b- The unit can be programmed to shut the car down on LOCK instead of door close but this typically requires using aftermarket remotes and not the factory remote.

I guess what I'm asking is, is there a way to set OEM priority on the lock/unlock, and disable that from the remote start unit?

By defeault a remote starter will always send a re-arm after remote start shut down simply to make sure the vehicle is armed.

At the moment, your unit has option D5 enabled which will also force a relock/rearm on shutdown. You can turn this off.

Commented: Evo All not recognizing request to lock or unlock from aftermarket starter

Fri, 05 Jun 2026 12:05:00 +0000

Glad that got it going for you!

Best regards

Answered: Mazda cx3

Thu, 04 Jun 2026 12:05:09 +0000

Bonjour,
L'application rencontre actuellement un problème. Fortin travaille pour le résoudre, nous vous remercions de votre patience pendant que nous y travaillons.J'ai pas un estime de temps pour une date de resolution.
Veuillez réessayer l'application de temps en temps, une fois le problème résolu, elle fonctionnera à nouveau normalement.

Cordialement

Answer selected: Programming procedure step number 5, start engine, solid red and blue

Wed, 03 Jun 2026 12:12:01 +0000

Hello,

What is the S/N number to the module?

A few things you can check:

- if using the sub3 harness ensure you have connector A plugged in

- if the red led does not flash rapidly when starting the vehicle, verify IMO connections

Best regards

Commented: I am installing an EVO-ONE with TB-X and R-LINK2 on a Mazda 3 Hatchback 2025 2.5 Turbo (Push-to-Start).

Wed, 03 Jun 2026 12:11:28 +0000

Hello,

Fortin does not support 3x lock start on this vehicle, an rf kit is required, that being said I cannot confirm that an rf kit will resolve your current issue. Please try performing the steps i mentioned above.

Best regards

Answered: How long and what AWG are the wires of the Fortin MR20 relay wire harness?

Wed, 03 Jun 2026 12:09:13 +0000

Hello,

The wire gauge for the mr20 is 18awg.

The wire length is roughly 12".

https://fortin.ca/en/products/installation-accessories/mr20/

Best regards

Answered: Features Menu

Thu, 28 May 2026 12:10:13 +0000

Hello,

Yes plug the module into the flasher and use pro mode, in pro mode you will see all optons.

Best regards

Answered: Need to get installation guide

Thu, 28 May 2026 12:08:54 +0000

Hello,

Installation guides for the 2018 Nissan Rogue pts can be found here: https://fortin.ca/en/vehicles/nissan/rogue/2018-push-to-start/compatibility/

Best regards

Answered: this is not a duplicate i need my flash module reset

Mon, 25 May 2026 12:54:36 +0000

Hello,

I apologize, all flash limits have been reset for modules 001A07 723426 & 002506 009655.

Best regards

Closed: I need my flash link reset.

Mon, 25 May 2026 12:06:38 +0000

My Evo all. Keeps going to red on the last step. When programming is. My Evo's supposed to be in. Bypass connection mode or remote starter connection mode.

Answered: How to renew expired activation key when you just purchased the product.

Mon, 25 May 2026 12:06:06 +0000

Hello,

The numerical code itself does not expire, the expiration date you see on the card is for the qr code.

You can download installation guides anytime without the need for any code on www.fortin.ca

Best regards

Answered: Please Reset and Guide Me, my EVO‑ALL Cannot Decode the Key

Fri, 22 May 2026 13:45:16 +0000

Door lock data and Data Key are required connections.

Your module will be reset but since you also followed the 1 key programming method completely, you may need a new module as it may be locked to that mode for that specific car now. The 1 key programming method is a completely different solution and installation.

The MAZ1 kit is not a suggested solution for DIY. The EVO-ONE + THAR-ONE-MAZ3 is less demanding when it comes to install and programming.

My suggestion for now would be (in this exact order)

Flash version 71.47
Reset the module https://fortin.ca/download/61931/EVOALLRESET.pdf
Follow the MAZ1 programming solution. (remove the batteries from the remotes when programming)

If you still cannot program the module this way, I would suggest looking into the EVO-ONE + THAR-ONE-MAZ3 solution.

Answered: I need my flash link module reset please

Thu, 21 May 2026 17:42:23 +0000

your flash limit is reset.

Note that 0.99 is only for when the unit is stuck on red. Meaning even at step 1 of programming, the leds never alternate and the red led is always on.

Please update back to 74.39, make sure settings protection is OFF and click save. From there reset the module and then attempt to reprogram. To reset the module follow this procedure.

-> Release on RED

-> Press and hold until all 3 leds alternate.

After the reset, make sure enable required options for whicher way/setup you are using (i.e. stand alone vs regular install, datalink vs wire-to-wire)