Questions & Answers - Recent activity in Lexus

Commented: 2017 IS-300

Tue, 09 Jun 2026 12:15:44 +0000

glad to hear, all the best.

Answered: T-harness plug and play for lexus GS300 2008

Mon, 11 May 2026 12:02:03 +0000

Hello,

Fortin does not currently offer any t-harness for the 2008 gs300. Also Fortin only lists the gs350 for 2008, not the 300.

https://fortin.ca/en/vehicles/lexus/gs-350/2008-push-to-start/compatibility/

Best regards

Answer selected: guide 83801

Mon, 06 Apr 2026 14:41:35 +0000

Hello,

No, 3x lock from oem remote is not supported for guide 83801.

Best regards

Commented: EVO-ONE Remote starter firmware 0.82 RX400h

Wed, 18 Feb 2026 13:22:06 +0000

0.82 is the only fw with that function.

It is up to you if you wish to use it or not, keep in mind anytime anyone locks the vehicle 3x either with the remote or with the button on the door, the module will initiate remote start.

Best regards

Answered: How to fix alarm coming on when remote starting car while vehicle is locked?

Fri, 16 Jan 2026 13:28:19 +0000

Hello,

You can either unlock the vehicle yourself using the oem remote before remote starting or you will need to connect the dis arm wire from the evo to the vehicle, the dis arm wire is located inside the drivers door.

https://www.wirecolor.com/en/vehicles/lexus_is_300_-_standard-key_(2001-2005)/

Best regards

Commented: Lexys rx400h , evo one lte, everything is hooked up, when i push to start the car nothing happens?

Tue, 09 Dec 2025 23:45:54 +0000

Hello,

Turn on D4 in the evo-one bypass options. Click save and re test.

Yes, int-sl+ must be on firmware 0.17, also make sure the data link blue and white are not being used between the 2 units, hardwire only as shown in the diagram.

If you have any more questions I think it would be best to phone in with the vehicle and module on hand so an agent can go over it with you.

1-877-336-7797

Mon - fri

8am - 6pm est

Best regards

Commented: Lexus RX350 2009 Firmware in Manual is not an option in Flashlink Manger 4

Mon, 08 Dec 2025 05:24:43 +0000

Did you figured it out? I have the same issue

Commented: EVO-ALL Flash limit reached

Wed, 03 Dec 2025 00:47:12 +0000

Thank you

Commented: Remote Starter Take Over Option - Lexus ISF

Mon, 24 Nov 2025 13:18:19 +0000

Take over procedure is on page 9: https://cdn02.fortin.ca/download/83801/EVO-ONE_IG_REG_BI_TOY_IS250-IS350-2009-2013_PTS_C_83801.pdf

Answered: lexus es350 2007

Tue, 06 May 2025 07:57:46 +0000

Hello,

No this vehicle does not support take over, it will shut down on door open.

Best regards.

Answered: Demarreur evostart sur lexus nx450h+ 2024

Mon, 14 Apr 2025 08:49:01 +0000

Salut Marc,

J'ai trouver ton module (002B04673172), le flash et les option semble correcte.

Vous pouvez essayer de deconnecter du compte, complement fermer l'application, re ouvrir et re connecter. Si il y a toujours un X dessus le NET quand vous avez le vehicle et le evo-start-lte svp appelez le soutien techniqure, 1-877-336-7797, Lun - Ven 8am 18:00pm.

Cordialement.

Answer selected: Evo-All and Door lock Harness

Thu, 27 Mar 2025 13:53:26 +0000

1/ Yes that connection is required
2/ This connection is optional but recommended. This is what shuts down the vehicle if someone enables Idle Mode.

Commented: Install guide

Mon, 06 Jan 2025 10:49:12 +0000

supported products and installation guides can be found here: https://fortin.ca/en/vehicles/audi/q7/2017-push-to-start/compatibility/

Answered: Do I need INT-SL+ with 2008 Lexus IS250 or do I need Key-overide-All?

Fri, 03 Jan 2025 09:51:10 +0000

Hello,

The evo-all does not do remote start on this vehicle, it only does immobiliser bypass. If you are going to use the evo-all you will need a remote starter to go along with it.

Same would apply with the key-override-all, if you were to use it, you will still need a remote starter to go along with it.

https://fortin.ca/en/vehicles/lexus/is-250/2008-push-to-start/compatibility/

Best regards.

Answered: Trunk not opening with evo rf kit 441 remote with evo one 2007 Lexus IS 250

Thu, 02 Jan 2025 16:17:19 +0000

did you have to add an EVO-ONE to make the remote start work or were you able to make the RFK441 just work with the EVO-ALL?

Answer selected: 2015 LS460

Fri, 27 Dec 2024 17:54:19 +0000

I connected the CAN wires to the OBD and it worked.

Answered: 2015 LS460

Tue, 24 Dec 2024 12:58:16 +0000

I connected the CAN wires to the OBD and it worked.

Answer selected: 2017 LS460

Mon, 11 Nov 2024 12:29:13 +0000

Hello,

No, the last time the LS460 was listed was in 2015. It has not been tested since.

https://fortin.ca/en/vehicles/lexus/ls-460/2015-push-to-start/compatibility/

Best regards.

Answered: 2006 Lexus RX400h hybryd. Evo one. Dash comes on for 10-12 seconds than shuts down. Parking lights 4 flash

Wed, 09 Oct 2024 08:48:58 +0000

Hello,

Turn on option D4-Hybrid mode.

Best regards.

Commented: EVO-One with THAR-TOY16 Programming stuck at step 7

Mon, 29 Jul 2024 14:31:06 +0000

Thanks.

I will double check wires and solding points.

Answer selected: Lexus LX600

Mon, 22 Jul 2024 12:14:04 +0000

what year is that?

Answered: Programming flash memory has reached its limit. Please help me reset it . evo one SN:002B04 656341

Mon, 29 Apr 2024 08:02:52 +0000

Hello,

Your module has been submitted for reset, it will be ready for use within 24 hours.

Best regards.

Answered: 2009 rx350 key sense

Wed, 13 Dec 2023 11:44:20 +0000

Hello,

On this vehicle I think the key sense is a white 4 pin connector, black wire in pin 2.

Best regards.

Commented: 2009 Lexus IS250 Evo One Install Help

Mon, 11 Dec 2023 15:07:40 +0000

Yes, the RFK411 would be fine.

If the vehicle requires to be disarmed prior to remote start so that the OEM alarm does not ring upon remote start, the int-sl will be needed. Otherwise, you will have to run lock/arm & unlock/disarm wires into the driver door.

Answered: Solid Red Light even after using dcryptor/adapter

Mon, 11 Dec 2023 08:04:47 +0000

Hello,

If the red led is stuck on please follow these instructions:

https://www.wirecolor.com/en/qa/92073/faq-red-led-stuck-on?show=92073#q92073

Best regards.

Answered: What do I need to do to make the EVO-START app work with a previously EVO-TOY6 installed on a Lexus ES350 2016?

Fri, 08 Dec 2023 16:22:07 +0000

It would require that the EVO-START-LTE module be installed and then paired to the EVO-ALL.

Instructions can be found here (pages 11-16): https://fortin.ca/download/102151/EVO-ONE_IG_EVO-START_QUICK-GUIDE_D_102151.pdf

Answered: 2010 Lexus RX 350 – EVO-ALL Stand Alone with ASCL6 CARLINK: Remote Start Not Working ( NO IGNITION, NO CRANK)

Thu, 26 Oct 2023 15:28:05 +0000

Hello,

try rolling the firmware back and re programming the unit.

Use 79.56. once you flash this fw, re program the unit to the vehicle and re test.

If it still does not work please provide a picture of the area you have checked for the oem starter module. You can send it to support@fortin.ca

Best regards.

Commented: 2010 Lexus rx 350. Not starting with locklocklock. Has No factory remote start.

Tue, 24 Oct 2023 14:55:24 +0000

Hey Jon,

I have a 2010 RX350 and I am having the EXACT same issue as you. Did you ever find the solution to this problem?

Commented: 2007 Lexus GS350 - Issues with INT-SL+ recognizing door locks

Tue, 17 Oct 2023 22:49:36 +0000

Thank you for the replies, I am also using an RM942 kit.

It turned out the antenna wasn't turning on, I managed to cycle the ignition twice and it activated.

I was having an issue with it starting and running for two seconds and shutting off however I did fix that by changing from option 20 from tachless to tachless 8 second crank and that solved that issue.

However now if I start it, use unlock on the RM remote and enter the vehicle with my OEM key fob in my pocket. Either I press the ignition button without the brake pedal it will shut off the car or if I step up on the brake and try to shift it into gear without pressing the ignition button it shuts off the car and acts like I always have the brake pedal depressed. The brake lights stay on and the red light stays lit up on the EVO-ONE. I can start the car without pressing the brake pedal and I can't see to get it out of this mode unless I unplug the EVO-ONE.

Thanks

Commented: Lexus NX300 - Fortin EVO one with EVO start LTE cannot remote start with app

Wed, 27 Sep 2023 13:05:51 +0000

Before attempting programming press unlock on the OEM remote.

To know if it programmed:

If following the valet switch method, the red led uner the yellow loop will blink once on its own when you let go of the brake.

If following the on off on method, the red led under the yellow loop will blink on its own once you release the brake pedal on the 4th press.

If you still cannot get it to program I suggest calling technical support to have an agent walk you through it in the vehicle.

Mon-Fri

8-6 EST

1-877-336-7797

Best regards.

Answer selected: I am unable to factory reset my evo all

Wed, 23 Aug 2023 17:21:17 +0000

Hello,

Please try the steps outlined here:

https://www.wirecolor.com/en/qa/92073/faq-red-led-stuck-on?show=92073#q92073

Best regards.

Answered: Please Reset Flash Limit on SN 001A07 014690

Mon, 14 Aug 2023 08:40:13 +0000

Hello,

I have reset the flash limit for you.

best regards.

Commented: 2007 Lexus GS450h EVO ONE with INT-SL+ OEM Key doesn't work

Fri, 19 May 2023 12:53:55 +0000

My door pin hardwired to EVO with pink/black wire, thats how 37.2 option knows if the door is oppened and shuts down the car if it's not unlocked by remote controle. If I unlock door with remote control, open door, then press brake car shuts down like in the door was openned scenario without unlocking by remote control.

Answered: Do D6 and D3 only read ignition?

Fri, 21 Apr 2023 09:09:59 +0000

Hello,

Could you please provide a bit more details so I can better understand the question, such as the year, make and model of the vehicle and which module and installation guide # you are referring to?

Best regards.

Answered: How does EVO-ALL protect from CAN attack?

Tue, 11 Apr 2023 08:19:53 +0000

Hello,

No the evo all does not block can bus communcication. The evo-all works in conjunction with the vehicles can network depending on the vehicle to provide statuses related to remote starting.

Best regards.

Answered: where is door lock data wire? It said blue at driver boot. 2008 GX470

Thu, 30 Mar 2023 08:59:54 +0000

Hello,

On this vehicle it can be either black or blue.

If you are having trouble finding it at the drivers door boot, the alternate location is:

Door Lock Data: Black or Blue, Body ECU on right rear of dash fuse box, white 30 pin connector, pin 24.

Best regards.

Answered: 2004 Lexus GX470 - Door lock rearms 30 secs after unlock, even after the door is opened

Wed, 29 Mar 2023 21:55:54 +0000

Can you tell me where is the door lock data wire is? It said at driver boot, but too many wire :)

Answer selected: Is steering lock wire mandatory?

Thu, 02 Feb 2023 11:43:49 +0000

Hello,

Yes it is mandatory.

It is what unlocks the steering wheel and allows the vehicle to start in some cases.

Best regards.

Answered: 2016 Lexus is350

Mon, 23 Jan 2023 17:55:04 +0000

Hello,

What is the S/N number to the evo please.

Best regards.

Lexus ES300h 2017 lights flash 4x and doesn't start

Fri, 30 Dec 2022 14:26:05 +0000

Using evo all and rfk942 on 2017 lexus es300h. hybrid, pts.
Installed using harness and connected white/black to purple wire on start/stop switch.

Programmed without issues, dcryptor ran fine. Able to lock/unlock using both OEM remote and rk942 remotes.
When trying to start (with either the oem or rk942) the parking lights and the red led on the evo all flash 4x.

Have tried:
a11 hood switch off, reset and reflashing, tested all connections. confirmed D4, D6 enabled.

Instructions say this means ignition before start. Not sure what is meant by this. The French translates to ignition key detected before starting? I have placed both OEM keys at a distance and tried the rk942 to start and got the same result.

Answered: Device flash limit reached

Tue, 27 Dec 2022 08:58:39 +0000

Hello,

Modules older than 5 years cannot be reset. Your module dates from 2014 and falls into that category.

Best regards.

Answered: no tach output, Fresh evo one install (no rf kit standalone)

Wed, 21 Dec 2022 10:22:47 +0000

Hello,

It gives no tach because vehicle did not crank. What's important to look for is if ignition turning on.

please start with a reset and reprogram.

Reset procedure must be done, options will need to be re-enabled after the reset. unit will need to also reprogrammed to the car and also redcrypted.

Reset procedure below: https://fortin.ca/en/qa/50193/faq-how-do-i-reset-my-evo-all

Hold down programming button while inserting the power.
Let go of button when the LED is RED
Push and Hold the programming button until all three LED start to alternate rapidly
Module is now reset.

Comment edited: lexus gs450h L10 fsport 2012 PUSH TO START EVO-ALL does flash red and yellow.

Fri, 09 Dec 2022 17:47:57 +0000

RESET the unit first

Flash 79.59

Reprogram in car

To reset, you need to release on RED, then press and HOLD until the 3 LED start to alternate.

Closed: lexus lx 500

Wed, 07 Dec 2022 21:34:55 +0000

Hello. What manual is suitable for 2022 Lexus LX500 (diesel) for evo-all (standalone)?

Answered: 05 es330 cranks no start evo one

Fri, 11 Nov 2022 08:06:01 +0000

Hello,

What is the S/N number to the evo one?

Best Regards.

Answered: module not blinking rapidly at step 5

Tue, 06 Sep 2022 09:44:40 +0000

programming of the RF-KIT uses the 4th LED on the BACK of the module where the yellow loop is. For programming the RF-KIT, you are not using the programming button on the unit. You use either the VALET button, or follow the secondary method mentionned in the RF programming guide.

programming of the key relies only on the Rx-Tx connections and the IGNITION connection.

Answered: PLEASE RESET FLASH LIMITS

Fri, 02 Sep 2022 12:25:36 +0000

Modules dated 2015 and older cannot be reset. This module being from 2014 falls into that category.

Answered: Is the T-Harness needed to intsall Evo-One on a 2006 Lexus IS250 Automatic Transmission?

Thu, 14 Jul 2022 17:03:36 +0000

There is no t-harness available for an 06 lexus is250.

Evo one installation guide is here: https://fortin.ca/download/99531/evo-one_ig_reg_bi_toy_gs350is250-avalon_2005_pts_int-sl_a_99531.pdf

Fortin does not make installation videos at this time.

Answered: Autolights, foglights and high beams stopped working after installing EVO-RS TOY6 on 2017 Lexus NX200t

Sat, 02 Apr 2022 00:34:17 +0000

BUMP

I want to clarify that the auto-lights, foglights and high beams do NOT turn on even if the car is on and driving. How is that related to parking lights?

Also noticed high beams won't turn on, either. The "symbol" indicator shows up on the dash but the physical beam lights do not turn on. Will the brown/white tapping solve this as well?

Closed: Install Evo One on a 1999 Lexus Es300 Remote start crank over but won't start Help

Wed, 16 Feb 2022 10:07:04 +0000

	Install Evo One on a 1999 Lexus Es300

	Remote start crank over but won't start but will start with key in the ignition but won't stay run even with the key in the ignition

	Help. Thank you.