Questions & Answers - Recent activity in Saturn

Answered: Looking for the install guide for an 08 saturn astra with an evo one.

Sun, 28 Aug 2022 14:20:22 +0000

https://fortin.ca/download/12981/evo-all_gm_cahier_zm20140123.pdf

Page 15, just add the main connector harness 12+,ignition, starter, accessory.

You need to wrap a key

2006 Saturn Ion Standard Key Passlock SL2V2

Mon, 30 Mar 2020 18:23:34 +0000

Called into Tech support but it's now after hours. Can't get the car to crank. I am using a separate remote keyless/start with the Passlock SL2-V2 Fortin Unit. When I called support they mentioned making sure the accessory wire drops when the car start is supposed to crank. I have verified that it has and still now crank. Verified all connections, but will check again. My ignition is blue and my accessory is brown. Anything else anyone can give me help on I would appreciate it.

Steven D.

Commented: EVO One the best choice for a 2006 Saturn Ion?

Mon, 11 Mar 2019 09:43:31 +0000

Thank you very much for the prompt responce!

Edited: How can EVO-ONE arm and remote start on 2004 Saturn ION without passlock preventing it?

Mon, 27 Nov 2017 02:21:20 +0000

I've followed the passlock teach sequence for both the EVO-ONE and the SL2V.2. It arms, but after the key has been removed the passlock anti-theft system shows that it has been activated on the instrument cluster. When it attempts to remote start, it tries but then the passlock 2 prevents it from starting. 2nd question, can I connect an analogue tach wire to this EVO-ONE to allow the 2nd manual transmission remote start mode? I have tried a SL2V.2 and an INT-SL+ along with the EVO-ONE and the same problem occurs.

Answered: security light on dash stays on all the time

Sat, 26 Dec 2015 11:37:20 +0000

This is one of those cars i cringe of when someone asks security light issues lol

Here's some things to look at.

1- did the client have the ignition barrel recall done? If so, this may change the type of passlock system the car would have. I've seen this on a chevy cobalt before and had to use a passlock-sl2 for the passlock bypass. May not be related but thtought i should bring this to light,

2- Instead of grounding the evo through datalink, ground it to pin 4 or 5 at the OBD-II. Two ground wires exist there, bcm ground and body ground. Try both, i forget which pin is bcm ground but you may need to ground the unit there and also the remote starter.

3- If problem is persistent even with the key, the passkey fuse may actually be blown. Try starting withoug the evo or remote start connected at all to see if problem persists.

4- Do you have black tape to cover the light? :P (kidding)

Answered: 09 saturn outlook

Tue, 08 Apr 2014 12:51:51 +0000

turned option 2 on car starter off and its the evo all locking back up i open the doors and still locks even when door is open for a min doors lock with it open its the evo doing this cause had different bypass in it before and did not have this issue and another gm does the samething there must be a software that could be used

Answered: 09 saturn outlook

Fri, 28 Mar 2014 12:48:08 +0000

Hi Steve,

What exactly are you installing in the vehicle?

Answered: do i cut yellow wire or splice into it? with [orange]and orangewithblack for 01 saturn sl1-passlocksl2 v.2

Tue, 18 Feb 2014 10:54:43 +0000

Hi Isaac,

You join the Orange and Orange/Black together and then splice both of them on the vehicles Yellow wire (not cutting wires in this car).

Commented: Can the Evo-All be used in my 2009 saturn vue for remote start without having to use an after market remote start?

Thu, 30 Jan 2014 19:40:48 +0000

Good! So no aftermarket would be required at this point

Recategorized: Can I use this product in my 05 Saturn Relay 3 Van to be able to start it after I have installed a new PCM?

Tue, 19 Nov 2013 13:23:45 +0000

I HAVE A MINT 10,000 mile Saturn Relay 3 Van. I have a new PCM that I want to install as it has a slightly custom tune for more power from the 3500 puny V-6. The damn PK3 trasponder security system is preventing the van from starting. So I need a way to bypass the PK3. If I buy and install this system, will it allow me to bypass the PK3 system, so I can start the Van using my new PCM? I have no problem having to start it remotley if that will be required. Please advise ASAP. Thank you.