Questions & Answers - Recent activity in Suzuki

Answered: 2009 Suzuki Grand Vitara By Pass Programing

Thu, 26 Sep 2024 08:08:16 +0000

Hello,

Fortin does not list a solution for this vehicle on the website nor is it supported. They used to but it was removed long ago due to inconsistency.

Best regards

Commented: grand vitara 2010 smartpass

Sat, 18 Dec 2021 04:00:58 +0000

2021 pour un GV 2010 3.2L avec smart keys

Dans mon cas le EVO-One ne pouvait pas bien cloner virtuellement la clef a puce, on a du faire un vieux truc de la clef cachee (avec un coil au tour du transpondeur de la clef d'ignition)

1 fois sur 2-3 le vehicule ne demarrais pas bien.

Commented: Suzuki Grand Vitara 2008/11 Smart-Pass with Evo Key fw v1.07

Sat, 18 Dec 2021 03:56:27 +0000

This Email link is no longer useful, they will answer, but they dont give any service in 2021

Answered: 2011 Grand Vitara smartpass will not start consistently

Sat, 18 Dec 2021 03:48:29 +0000

You may need the old hidden key trick

Or add some EVO-Key or KEY override all ?? It may be an special installation ??

For my gv2010 3.2L with Smart Keys EVO-One was not able to fully ''virtually duplicate'' the key

Had failures 1 third of the time

Suzuki swift sport 2015 europe

Mon, 13 Dec 2021 16:55:50 +0000

Bonjour, le démarrage à distance est il compatible avec la swift sport 2015 avec bouton de démarrage ?
quel est le module qu'il faut ?
merci

Commented: using Evo one standalone generic installation signal for doors closed

Mon, 18 Jan 2021 12:15:04 +0000

You cannot enable tachless on a manual transmission vehicle.

The evo-one is not supported on your vehicle.

Edited: suzuki kizashy 2011 anomalie de demarage

Sat, 21 Nov 2020 13:30:02 +0000

avec un evo all demareur astrostart tout les branchemant ok la clef est decriptet logiciel ajour.

lauto demare et tout est ok apres quelque segonde elle tombe en anomalie de demarage et le moteur reste en fontion mais le chauffage arrete

Commented: Suzuki Grand Vitara 2010, Evo all doesn’t program

Fri, 11 Sep 2020 15:58:28 +0000

if there is no transponder you would program on just the blue led for the can bus.

Answered: do you have a t-harness for a suzuki sx4 2008

Wed, 21 Mar 2018 09:45:15 +0000

We do not have a t-harness for that vehicle.

Answered: 2016 suzuki swift alarm installation diagrams

Thu, 01 Jun 2017 08:19:12 +0000

Unfortunatly our info on that vehicle is very limited ( Since we don't have access to that car in North America ).

You may try to contact Fortin Russia Agency ( http://ifar.su/ ) to know if they have attempt to do that car and if they have info on it.

Have a nice dayt

Commented: Problem programming oem fob key to Evo one

Tue, 19 Jan 2016 08:31:03 +0000

Did the module program exactly as shown in this guide? http://fortin.ca/download/25401/evo-one_suzuki_grandvitara-sx4_2008-2013_revb20141212.pdf

If so i would take a look at your Rx/Tx connections and Can bus...

Answered: Sequence of operation

Sat, 14 Nov 2015 10:51:09 +0000

You will need a seperate RFKIT to control the EVOONE. You will also require a FlashLink Updater v2 module to flash your EVOONE and run the Dcryptor process. Procedure to start the vehicle depends on the RFKIT you will choose. We do not provide guide with dash dissasembly, guides are made for installers that have knowledge in dash dissasembling and electronics terms.

Professional installation is highly recommended.

Answered: suzuki swift sport 2014 manual push start from japan. Euro version remote start is compatible?

Mon, 27 Apr 2015 10:20:04 +0000

Should be the same vehicle but it was never tested. We also do not have any installation diagrams for vehicles marked as (euro).

Answered: 2012 Suziki Kizashi(PTS) Remote engine start key can not use

Wed, 02 Jul 2014 13:29:40 +0000

Hello Jianli liu,

We have some questions...

1- Are you trying to use stand alone or is there a remote starter installed?

2- Is it the factory remote that does not lock or unlock when the car is started?

About Suziki Kizashi,do you have the other method that similar Chinese Nissan Teana. (EVO is used only bypass,STARTER will control to start the engine.)

Currently we can only do it by connecting the push start button and the brake. We have not tested any other method.

The way we do the transonder bypass with Rx and Tx would not allow the car to start if we do not do the connections of the brake and push to start button. To do connections similar to the Teana, we would need to completely redo engineering on the transponder bypass part.

This installation simulates someone starting the car. To start he car normally, you need to push on the brake and the push to start button. The EVO-ALL does the same thing.

Answered: fortin FSA-206

Mon, 27 Jan 2014 15:38:41 +0000

Bonjour Mario,

Tous les manuelle ce trouve ici, http://ifar.ca/fr/products/remote_starters/fsa-206/files.html

Answered: Suzuki kizashi push-to-start

Tue, 14 Jan 2014 15:30:38 +0000

Quel version est dans le EVO-ALL? Apres 10 secondes, il essai tu un autre fois? Normalement, ca peut etre un probleme de tach. Essai le mode tachless(sans tach en mode voltage seulement). Le vehicule devrai rester en marche.

Recategorized: Does EVO-ALL need Flashed after programing?

Mon, 06 Jan 2014 17:08:41 +0000

Hi, I have an EVO-ALL service #001A06278574 I'm installing in a 2012 Suzuki Kizashi. with an Audiovov Prestige APS901C Remote Starter. The Blue light is blinking slow on the Fortin. The car will crank over with the remote start but will not start. The dash displays accessory not ignition on when it is trying to start. The Fortin has version 6 hardware and 4.18 firmware. does this meet the requirements that I need for this car or does it need flashed after I program it? The dealer flashed the Fortin for the car when I purchased it but when I downloaded the installation instructions it says to Flash it after I program it. Any Help would be appreciated.

Thanks,

Mike

Answered: Does EVO-ALL need Flashed after programing?

Mon, 06 Jan 2014 08:53:05 +0000

After you have done all the data aquisition (programming) in the vehicle, you will need to run the dcryptor program with the flash link updater 2 in order for the EVO ALL to learn the key. This is required for the module to learn the transponder. If you can not run the dcryptor you can also use a keybox or do a key wrap with the existing remote keyfob. The firmware on your module is up to date and should work in your vehicle provided you run the dcryptor.