Questions & Answers - Recent questions and answers in Mazda

Answered: THAR-ONE-MAZ5

Fri, 17 Jul 2026 12:09:01 +0000

Hello,

When using the thar-one-maz5 you will not need any diodes or relay.

Best regards

Answered: Mazda cx 30 shuts off after pressing the brake pedal

Mon, 06 Jul 2026 13:32:01 +0000

Where is the vehicle located?

Answered: Mazda cx 30 shuts off after pressing the brake pedal

Sun, 28 Jun 2026 13:26:31 +0000

Hi, did you resolve the issue? I bought the same module and have the same problem.

Answered: EVO-ALL locked - "The current device cannot be flashed anymore" error

Mon, 15 Jun 2026 12:15:49 +0000

Hello,

I have reset the flash limit for you.

Please note evo-mazt1 type installs will not allow the same module to be programmed to the same vehicle more than once. Meaning if this module was already successfully programmed to the car, you cannot re program it to the same car a 2nd time.

Best regards

Answered: Evo Start 2 - Error the request returned an invalid code every time I try to use it

Wed, 10 Jun 2026 19:55:49 +0000

Hello,

Thank you for your patience while Fortin works to resolve the issue.

An update has been released for iPhone users uing the evo start 2 application.

Please go to your app store and search evo start 2, select the app and click on the blue update icon.

Best regards

Answered: RFK942 antenna LED not blinking

Tue, 09 Jun 2026 12:04:54 +0000

Hello,

Yes it will stop flashing after a few hours, if you want to to continue flashing indefinetly when armed plug the antenna into the flash link and flash the latest version of fw into the antenna, 1.10.

Best regards

Answered: Reset All SERVICE # 002B04 753842

Mon, 08 Jun 2026 12:35:39 +0000

A dcryptor reset request has been sent in, this can take up to 24 hours.

Answered: Mazda cx3

Thu, 04 Jun 2026 12:05:09 +0000

Bonjour,
L'application rencontre actuellement un problème. Fortin travaille pour le résoudre, nous vous remercions de votre patience pendant que nous y travaillons.J'ai pas un estime de temps pour une date de resolution.
Veuillez réessayer l'application de temps en temps, une fois le problème résolu, elle fonctionnera à nouveau normalement.

Cordialement

Answered: I am installing an EVO-ONE with TB-X and R-LINK2 on a Mazda 3 Hatchback 2025 2.5 Turbo (Push-to-Start).

Mon, 01 Jun 2026 16:15:10 +0000

Hello,

Can you please try the following:

- re flash 2.02 into the tb-x

- master reset the evo-x-one.

To reset the evo, hold down the programming button while plugging in the 4 pin connector from the t-harness and let go of the programming button on the red led.

Then press and hold the programming button again until all 3 led's start to cycle.

Perform this same reset a 2nd time but releasing on the yellow led.

From there re do the options, programming and re run dcryptor and re test in the vehicle.

Best regards

Answered: Features Menu

Thu, 28 May 2026 12:10:13 +0000

Hello,

Yes plug the module into the flasher and use pro mode, in pro mode you will see all optons.

Best regards

Answered: Please Reset and Guide Me, my EVO‑ALL Cannot Decode the Key

Fri, 22 May 2026 13:45:16 +0000

Door lock data and Data Key are required connections.

Your module will be reset but since you also followed the 1 key programming method completely, you may need a new module as it may be locked to that mode for that specific car now. The 1 key programming method is a completely different solution and installation.

The MAZ1 kit is not a suggested solution for DIY. The EVO-ONE + THAR-ONE-MAZ3 is less demanding when it comes to install and programming.

My suggestion for now would be (in this exact order)

Flash version 71.47
Reset the module https://fortin.ca/download/61931/EVOALLRESET.pdf
Follow the MAZ1 programming solution. (remove the batteries from the remotes when programming)

If you still cannot program the module this way, I would suggest looking into the EVO-ONE + THAR-ONE-MAZ3 solution.

Answered: Activation Key not valid

Wed, 29 Apr 2026 12:02:58 +0000

Hello,

Here is the installation and programming guide for the evo one on a 2010 mazda 3 standard key with automatic transmission: https://fortin.ca/download/80431/EVO-ONE_IG_REG_BI_MAZ_3_2010-2013_KEY_A_80431.pdf

Pictures are on page 2, wiring diagram is on page 3.

Best regards

Answered: Can you reset the device please SN:005701001828

Mon, 13 Apr 2026 16:20:40 +0000

Hi ebrahim alsadi,

I have submitted your module (005701 001828) for reset.

It will be ready for use within 24-48 hours.

Best regards

Answered: anyone experience 2016 Mazda 6 steering issue after evo-one & T Harness install?

Sun, 08 Mar 2026 20:27:27 +0000

I am having the exact same issue. Did you find a fix?

Answered: Can you reset evo-all flash limit from my device 001A06 734588 ?

Wed, 25 Feb 2026 18:47:44 +0000

Hello,

Currently modules with a manufacture date of 2018 and older cannot be re configured at the flash link updater.

If you wish to flash or configure an evo module please use one with a manufacture date of 2019 or newer with a qr code on the label.

best regards

is it ok to tap the low beam wire instead of parking lights?

Tue, 24 Feb 2026 12:32:07 +0000

Hey, I've got a 2015 Mazda 6. Right now my remote starter is hooked to the parking lights at the stalk. Can I just swap that over to the low beam wire instead so the headlights come on when I start it? Anything I should watch out for?

Answered: CAN YOU RESET : EVO-ONE SN: 002B07 239663 Please help and thank you.

Mon, 23 Feb 2026 20:58:18 +0000

Hello,

Modules with a manufacture date of 2019 and older cannot be re configured at the flash link updater. Please use a module with a manufacture date of 2020+ with a qr code on the label.

Best regards

Turn on the Idel mode

Mon, 23 Feb 2026 02:30:43 +0000

When I press the lock button three times while the car is running, the third button unlocks the door instead of locking it, even though the idle control system is supposed to lock it. The door remains open, and if I open the door without the remote, it turns off immediately. I want to lock my 2022 Mazda 6 Evo One Maz3.

Answered: limite de flash atteinte

Mon, 16 Feb 2026 13:28:02 +0000

Salut,

Les modules avec un date de fabrication 2019 est moins son pas flashable au flash link.

Svp si vous voulez flasher un module utilise un evo avec un date de 2020 et plus.

Cordialement

Answered: RFK942 evo-one

Mon, 09 Feb 2026 21:28:01 +0000

There is nothing to change in the EVO-ONE concerning programming an Fortin RF-kit to it.

Answered: Mazda cx30 2022

Thu, 05 Feb 2026 13:11:17 +0000

Hello,

Turn off e4, also do not use the factory door handle for take over when the vehicle is remote started, you must unlock the vehicle with either the oem remote or the 942 remote.

Best regards

Answered: Start stop

Mon, 02 Feb 2026 14:11:38 +0000

Hello,

What is the vehicle in question?

Best regards

Answered: Mazda CX-60 are you planning to support this model? When?

Wed, 28 Jan 2026 20:19:04 +0000

Hello,

At this time I have no eta on when a solution will be made available for that vehicle.

When and if one does become available the vehicle will be listed on www.fortin.ca

Best regards

Answered: LTE Mazda

Wed, 28 Jan 2026 14:41:19 +0000

Hello,

Yes it is possible to use evo start lte in Armenia.

You would need to send an email to support@fortin.ca and you would need to include the following information: The APN, MNS, MCC and name of all the phone providers of your country. Once that information is received we can configure a evo start lte for your region.

Best regards

Answered: Mazda cx30

Mon, 26 Jan 2026 18:23:31 +0000

Hello,

Are you referring to the proxi button on the door handle?

Thank you.

Answered: Mazda cx30

Mon, 19 Jan 2026 14:34:50 +0000

Hello,

No there is no provision for auto window up or down using the evo-one for this particular vehicle.

Best regards

Answered: Dcryptor option greyed out.

Mon, 19 Jan 2026 13:41:55 +0000

Hello,

In this case you will need to run dcryptor in "pro mode". To do this when you have the evo plugged into the flash link and the program open click on the gear icon in the upper right hand corner, then click on "go to pro mode". Once you are in pro mode you will see the dcryptor tab on the left hand side, click it, then click send data. Once it is finished it will let you know.

From there return it to the vehicle and pair the 441 remotes and test the system.

Best regards

GSM module

Tue, 13 Jan 2026 10:21:39 +0000

What brand of GSM or LTE module can I connect to the Fortin Evo-One to work on international networks?

Answered: Gsm module

Mon, 12 Jan 2026 22:44:15 +0000

Hello,

No the evo-one does not support ads protocol.

Best regards

Answered: Mazda cx-30 2022

Mon, 12 Jan 2026 15:06:47 +0000

Здравствуйте. Вы можете установить GSM-реле и подать минус к среднему контакту трехконтактного разъема Evo-One, совершив звонок с мобильного телефона...

Answered: Troubleshooting help on Evo Start amber flashing light (2x) on Mazda cx5 2020

Mon, 12 Jan 2026 13:46:45 +0000

Hello,

Yes the yellow wire must be connected to the vehicles ignition. Onec that is done try performing the validation test:

Please note evo start 2 only works in select parts of ontario and quebec.

Best regards

Answered: LTE module

Mon, 12 Jan 2026 13:35:56 +0000

Hello,

No.

Please send an email to support@fortin.ca to inqiure about evo start lte in Armenia.

Best regards

Mazda cx-30

Sun, 11 Jan 2026 10:33:07 +0000

Hello.I live in Armenia and do we have a 4g 5g network.I have an evo-one connected to my 2022 Mazda cx30.Can i connect your LTE module to the Fortine evo-one? can i install a SIM card from our operator on your LTE module? Will it be possible to remotely start the engine from my phone?

Answered: Mazda CX-30 2022 USA

Sat, 10 Jan 2026 17:12:15 +0000

Lte module

Answered: hello.Mazda CX30-30 2022

Wed, 07 Jan 2026 13:22:22 +0000

Hello,

Yes it is normal for the parking lights to flash upon take over.

Best regards

Answered: Hello.Ihave a Mazda CX-30 2022,but i have Baypass 90(06) .what firmware should I install?

Tue, 06 Jan 2026 13:54:03 +0000

Hello,

Here is the guide for 2022 cx-30, 90.06 is the correct fw:

https://cdn02.fortin.ca/download/99841/EVO-ONE_IG_RTO_BI_MAZ5-3_2019_PTS_C_99841.pdf

Best regards

Answered: flash limit reached - reset?

Mon, 05 Jan 2026 13:08:50 +0000

Hello,

Modules dated 2019 - cannot be configured at the flash link updater.

If you wish to flash or configure a evo please use a module with a manufacture date of 2020+ with a qr code on the label.

Best regards

Answered: hello.Ive reashed my firmware limit.Canyou open evo one sn 002B04 749811.date 11/2025.please

Mon, 05 Jan 2026 13:01:54 +0000

Hello,

The flash limit has been reset.

Best regards

Answered: Evo one can't be flashed any more

Mon, 22 Dec 2025 13:35:53 +0000

Hello,

Modules dated 2018 - cannot be configured at the flash link.

If you wish to flash or configure a module please use one dated 2019+ with a qr code.

Best regards

Answered: The fortin remote will replace the keyfob THAR-ONE-MAZ5

Thu, 18 Dec 2025 13:06:04 +0000

Hello,

No it will not replace your OEM remote.

Best regards

Mazda3 2020 cannot unlock doors after remote start

Wed, 17 Dec 2025 18:48:51 +0000

I have a Mazda3 2020 with push-to-start. Installed is an EVO-ALL and I have a modified key with a Fortin RM9MA. Up until recently, if I remote started the vehicle, I could then use my OEM or RM9MA key to unlock the doors. Now, once the vehicle is remote started, I cannot unlock the doors with either remote. The lights flash, and the gas cover locks/unlocks, but the doors remain locked.

Sometimes, if I turn off the vehicle using the key, I can then unlock the doors, but most of the time they still stay locked. I have had to use the emergency physical key to gain access to the car on multiple occasions. Please advise on troubleshooting steps.

Answered: Flashing limit reached

Mon, 15 Dec 2025 15:20:18 +0000

Hello,

Modules with a manufacture date of 2018 and older cannot be configured at the flash link. Please use a module from 2019+ with a QR code on the label.

Best regards

Answered: EVO-START Activated Error

Mon, 24 Nov 2025 14:23:13 +0000

Hello,

Looks like you got it all set up!

Normally that error happens when entering the wrong passocde.

Passcode is always 888888

Best regards

Answered: LINKR LT3 not programming to EVO One

Wed, 05 Nov 2025 00:19:43 +0000

Just needs to be paired to the evo-one.

Press unlock on the OEM remote to make sure the evo-one is disarmed (as it wont allow any RF programming while armed), then follow the RF-kit/telematics pairing procedure.

-> igniiton ON

-> ignition OFF

-> ignition ON

-> press and release the brakes 4 times

Answered: Evo-Start app says account locked when trying to login.

Mon, 27 Oct 2025 18:39:48 +0000

Hello,

You cannot log into the same account on multiple devices.

Each phone needs to have its own email/account.

To create an account download the evo start app and tap on register.

Best regards.

Answered: programmation, appairage

Wed, 22 Oct 2025 18:14:24 +0000

Bonjour,

Programme le can-bus en premier en suivants les etapes si dessous:

Une foi le can-bus est programmer, vous pouvez programmer les telecommandes rfk912. Page 2, programmation des telecommandes: https://cdn02.fortin.ca/download/69591/EVO-ONE_QG_RM912_FR_B_69591.pdf

Apres la programmation des telecommandes vous pouvez continuer avec la programmation du bypass avec les 2 cle.

https://cdn02.fortin.ca/download/80601/EVO-ONE_IG_REG_BI_MAZ_CX7_2007-2012_KEY_A_80601.pdf

Cordialement.

Answered: Is Fortin planning on releasing a T-harness and install procedure for a 2025 Mazda CX-50?

Wed, 22 Oct 2025 12:18:26 +0000

Hello,

It is very possible that in the future Fortin will release a t-harness solution for the veihcle however I have no ETA on when such a solution would be made avialable to the public.

You can periodically check the Fortin website to see if the vehicle has been added/updated.

Best regards.

Answered: need reset my evo one

Mon, 20 Oct 2025 12:51:00 +0000

Bonjour,

Non vous a pas besoin d'un reset.

Le t-harnais pour ce vehicule est le thar-one-maz3.

Si le module ne programme pas vous pouvez appellez le soutien technique pour l'assistance.

1-877-336-7797

lun - ven 8am 18pm

Cordialement.

Answered: Please reset EVO-ALL.

Thu, 09 Oct 2025 12:15:41 +0000

Hello,

I have reset the unit.

Best regards.

Answered: Please reset Dcryptor limit

Thu, 02 Oct 2025 12:03:44 +0000

Hello,

I have submitted your module for reset, it will be ready for use within 24-48 hours.

Best regards.