<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0">
<channel>
<title>Questions &amp; Answers - Recent questions in Chevrolet</title>
<link>/en/qa/questions/chevrolet</link>
<description>Powered by Question2Answer</description>
<item>
<title>proplem in module</title>
<link>/en/qa/140108/proplem-in-module</link>
<description>

&lt;p&gt;hello dear sorry for&amp;nbsp;disturbing&amp;nbsp;&lt;img alt=&quot;&quot; src=&quot;/en/qa/?qa=blob&amp;amp;qa_blobid=8729227867998581920&quot;&gt;you&lt;/p&gt;

&lt;p&gt;I have a problem with a device&lt;/p&gt;

&lt;p&gt;Model: EVo-ALL&lt;/p&gt;

&lt;p&gt;DATE:10/2025&lt;/p&gt;

&lt;p&gt;Fortin CA&lt;/p&gt;

&lt;p&gt;SN: 001A07789405&lt;/p&gt;

&lt;p&gt;I tried to install the device multiple times on my personal vehicles, which is a 2017 Chevrolet Silverado truck that uses a key for ignition. When I tried to install the module, the yellow light stopped, and when I tried to update the module, the following message appeared (invalid Key data). Is it possible for me to re-download the program from you, for your information my firmware 70XX&lt;/p&gt;</description>
<category>Chevrolet</category>
<guid isPermaLink="true">/en/qa/140108/proplem-in-module</guid>
<pubDate>Sun, 17 May 2026 14:16:42 +0000</pubDate>
</item>
<item>
<title>Pairing RFK411 remote kit with the Evo One on a 05 dodge dakota</title>
<link>/en/qa/140052/pairing-rfk411-remote-kit-with-the-evo-one-on-a-05-dodge-dakota</link>
<description>I have a 05 dodge dakota, just installed the evo one with the RFK411 antenna kit 1 way 1 button remotes and I cant get the remotes to pair. I have tried the few ways ive seen recommend with no luck. I can not find a pairing procedure for this kit with this system.</description>
<category>Chevrolet</category>
<guid isPermaLink="true">/en/qa/140052/pairing-rfk411-remote-kit-with-the-evo-one-on-a-05-dodge-dakota</guid>
<pubDate>Tue, 05 May 2026 04:43:57 +0000</pubDate>
</item>
<item>
<title>2009 Tahoe intermittent start from remotes</title>
<link>/en/qa/140046/2009-tahoe-intermittent-start-from-remotes</link>
<description>Evo all s/n 001A07 726606&lt;br /&gt;
&lt;br /&gt;
Vehicle doesn’t always start under remote operation.starts fine with key all the time. Using rf kit 942&lt;br /&gt;
&lt;br /&gt;
2009 Chevy Tahoe</description>
<category>Chevrolet</category>
<guid isPermaLink="true">/en/qa/140046/2009-tahoe-intermittent-start-from-remotes</guid>
<pubDate>Sun, 03 May 2026 02:15:57 +0000</pubDate>
</item>
<item>
<title>system worked flawlessly but only once.</title>
<link>/en/qa/139797/system-worked-flawlessly-but-only-once</link>
<description>i have just installed my evo-one with the gm3 t harness, and 942 rf kit on a 2015 chevy silverado 2500hd with standard key and onstar. i got the remote start and locks to work during testing but after i buttoned up, being careful not to stress any wires, my locks are no longer functioning. the remote says it worked, i hear the relays clicking, and see the parking lights flash. if i try to start the truck it will successfully start and run for about 3 seconds before shutting down. i will get several flashes of the parking lights but then it will not try to start again. i have counted 2 and 4 flashes after a failed remote start and i have even seen &amp;quot;service theft detterent system&amp;quot; on my dash a time or two after a failed start.</description>
<category>Chevrolet</category>
<guid isPermaLink="true">/en/qa/139797/system-worked-flawlessly-but-only-once</guid>
<pubDate>Fri, 10 Apr 2026 12:38:02 +0000</pubDate>
</item>
<item>
<title>Flash limit reached</title>
<link>/en/qa/139718/flash-limit-reached</link>
<description>Issues with EVO-ONE and now flash limit reached &lt;br /&gt;
&lt;br /&gt;
S/N 002B04 221566&lt;br /&gt;
&lt;br /&gt;
2004 Chevy Suburban 1500 Std Key install</description>
<category>Chevrolet</category>
<guid isPermaLink="true">/en/qa/139718/flash-limit-reached</guid>
<pubDate>Wed, 08 Apr 2026 03:27:31 +0000</pubDate>
</item>
<item>
<title>How to use remote start app if I bought my car but dont know previous owner?</title>
<link>/en/qa/139699/how-to-use-remote-start-app-if-i-bought-my-car-but-dont-know-previous-owner</link>
<description>I recently bought a car that has the receiver that works with the evo remote start app but I already tried scanning the qr code and entering the 888888 password but it does not work. I do not know the previous owner for a transfer what can I do?</description>
<category>Chevrolet</category>
<guid isPermaLink="true">/en/qa/139699/how-to-use-remote-start-app-if-i-bought-my-car-but-dont-know-previous-owner</guid>
<pubDate>Tue, 07 Apr 2026 02:06:21 +0000</pubDate>
</item>
<item>
<title>Reset the flash count</title>
<link>/en/qa/138878/reset-the-flash-count</link>
<description>

&lt;p&gt;
	Hi there, could you please reset my flash count had some issues and I had to refresh it&amp;nbsp;&lt;/p&gt;


&lt;p&gt;
	&lt;span style=&quot;font-family: Helvetica;&quot;&gt;SN: 001A07 225308&lt;/span&gt;&lt;/p&gt;


&lt;p&gt;
	&lt;span style=&quot;font-family: Helvetica;&quot;&gt;thank you&amp;nbsp;&lt;/span&gt;&lt;/p&gt;</description>
<category>Chevrolet</category>
<guid isPermaLink="true">/en/qa/138878/reset-the-flash-count</guid>
<pubDate>Fri, 06 Feb 2026 18:27:46 +0000</pubDate>
</item>
<item>
<title>Identifier lalarmes</title>
<link>/en/qa/138859/identifier-lalarmes</link>
<description>Quand on a une alarme il y a plusieurs code différents comment les identifier</description>
<category>Chevrolet</category>
<guid isPermaLink="true">/en/qa/138859/identifier-lalarmes</guid>
<pubDate>Fri, 06 Feb 2026 10:22:42 +0000</pubDate>
</item>
<item>
<title>We have a 2025 Chevrolet Silverado 1500.  Do you have a remote start solution for this vehicle ?</title>
<link>/en/qa/138602/we-have-a-2025-chevrolet-silverado-1500-do-you-have-a-remote-start-solution-for-this-vehicle</link>
<description>Do you have a remote start solution for a 2025 Chevrolet Silverado 1500 ?</description>
<category>Chevrolet</category>
<guid isPermaLink="true">/en/qa/138602/we-have-a-2025-chevrolet-silverado-1500-do-you-have-a-remote-start-solution-for-this-vehicle</guid>
<pubDate>Wed, 28 Jan 2026 14:52:08 +0000</pubDate>
</item>
<item>
<title>Can not get a Evo X One lock/unlock signal wires to operate DEI 451M relay..HELP!</title>
<link>/en/qa/138293/can-not-get-a-evo-x-one-lock-unlock-signal-wires-to-operate-dei-451m-relay-help</link>
<description>2024 Chevy 3500 Push Start Gas - Evo One with the harness. &amp;nbsp;I installed the Evo One for 2 reasons, remote start (that is working with no issue) and for the lock/unlock pulse wires. &amp;nbsp;I am trying to have the lock and unlock pulse wires operate a DEI 451M relay to be able to operate reverse polarity actuators that will be installed on the locking mechanism on the doors of the truck&amp;#039;s service body. &amp;nbsp;While testing, if I ground out the lock and unlock wires of the 451M, it will operate the actuators as desired so I know the 451M is working properly. &amp;nbsp;When the lock and unlock wires are tied together between the 2 devices, nothing. TIA</description>
<category>Chevrolet</category>
<guid isPermaLink="true">/en/qa/138293/can-not-get-a-evo-x-one-lock-unlock-signal-wires-to-operate-dei-451m-relay-help</guid>
<pubDate>Sun, 18 Jan 2026 00:04:38 +0000</pubDate>
</item>
<item>
<title>Decryptor limit reached</title>
<link>/en/qa/137802/decryptor-limit-reached</link>
<description>Please reset EVO ONE 002B04 693928. Decryptor limit has been reached</description>
<category>Chevrolet</category>
<guid isPermaLink="true">/en/qa/137802/decryptor-limit-reached</guid>
<pubDate>Sat, 03 Jan 2026 17:41:12 +0000</pubDate>
</item>
<item>
<title>12 VDC (-)????</title>
<link>/en/qa/137718/12-vdc</link>
<description>Odd question...&lt;br /&gt;
&lt;br /&gt;
I was gathering everything and making my list for the install. &amp;nbsp;Everything seems pretty simple, BUT I have noticed that there is NO noted 12 vdc (-) reference for the EVOALL. &amp;nbsp;This is my first Fortin install so i just wanted to confirm this? In my 30+ years in low voltage work, I do not think I have come accrossed this.</description>
<category>Chevrolet</category>
<guid isPermaLink="true">/en/qa/137718/12-vdc</guid>
<pubDate>Tue, 30 Dec 2025 16:39:32 +0000</pubDate>
</item>
<item>
<title>Reset flash limit</title>
<link>/en/qa/137693/reset-flash-limit</link>
<description>S/n 001a07 733057&lt;br /&gt;
&lt;br /&gt;
evo all&lt;br /&gt;
&lt;br /&gt;
date 5/2025</description>
<category>Chevrolet</category>
<guid isPermaLink="true">/en/qa/137693/reset-flash-limit</guid>
<pubDate>Mon, 29 Dec 2025 20:39:32 +0000</pubDate>
</item>
<item>
<title>on my evo all my flash limit is reached how do i reset</title>
<link>/en/qa/137628/on-my-evo-all-my-flash-limit-is-reached-how-do-i-reset</link>
<description>reset avo all flash limit please</description>
<category>Chevrolet</category>
<guid isPermaLink="true">/en/qa/137628/on-my-evo-all-my-flash-limit-is-reached-how-do-i-reset</guid>
<pubDate>Sun, 28 Dec 2025 20:57:32 +0000</pubDate>
</item>
<item>
<title>After programming and installation only one of the vehicle fob will work for starting the vehicle</title>
<link>/en/qa/137584/after-programming-and-installation-only-one-the-vehicle-fob-will-work-for-starting-the-vehicle</link>
<description>Installed the EVO-ALL and it&amp;#039;s working, but with only one of the 2 chevy fobs. &amp;nbsp;Are there steps I can follow to have both fobs work?</description>
<category>Chevrolet</category>
<guid isPermaLink="true">/en/qa/137584/after-programming-and-installation-only-one-the-vehicle-fob-will-work-for-starting-the-vehicle</guid>
<pubDate>Thu, 25 Dec 2025 17:36:49 +0000</pubDate>
</item>
<item>
<title>Device flash limit reset request</title>
<link>/en/qa/137557/device-flash-limit-reset-request</link>
<description>

&lt;p&gt;&lt;span style=&quot;color:#292929; font-family:Fortin,Arial,Helvetica,sans-serif; font-size:medium&quot;&gt;Hello,&amp;nbsp;&lt;/span&gt;&lt;/p&gt;

&lt;p&gt;&lt;span style=&quot;color:#292929; font-family:Fortin,Arial,Helvetica,sans-serif; font-size:medium&quot;&gt;I require&amp;nbsp;a flash limit reset on EVO-ONE&amp;nbsp;#002B07 164168.&lt;/span&gt;&lt;/p&gt;

&lt;p&gt;&lt;span style=&quot;color:#292929; font-family:Fortin,Arial,Helvetica,sans-serif; font-size:medium&quot;&gt;DATE 02/2017&lt;/span&gt;&lt;/p&gt;

&lt;p&gt;&lt;span style=&quot;color:#202124; font-family:&amp;quot;Google Sans&amp;quot;,arial,sans-serif; font-size:20px&quot;&gt;Thank you in advance for your help.&lt;/span&gt;&lt;/p&gt;</description>
<category>Chevrolet</category>
<guid isPermaLink="true">/en/qa/137557/device-flash-limit-reset-request</guid>
<pubDate>Wed, 24 Dec 2025 15:27:49 +0000</pubDate>
</item>
<item>
<title>Programming successful, will only work one time.</title>
<link>/en/qa/136918/programming-successful-will-only-work-one-time</link>
<description>After going through the programming, I installed back into vehicle and it worked the first time. I took it back to the computer, saved new settings to module. Reinstalled back into vehicle and it started the vehicle once again. Will not start vehicle again.</description>
<category>Chevrolet</category>
<guid isPermaLink="true">/en/qa/136918/programming-successful-will-only-work-one-time</guid>
<pubDate>Tue, 25 Nov 2025 20:57:08 +0000</pubDate>
</item>
<item>
<title>2020 chevy colorado evo key wiring</title>
<link>/en/qa/136308/2020-chevy-colorado-evo-key-wiring</link>
<description>Where to get (-) while running out rs19 to dark blue a1 (-) gwr? Ground wire</description>
<category>Chevrolet</category>
<guid isPermaLink="true">/en/qa/136308/2020-chevy-colorado-evo-key-wiring</guid>
<pubDate>Mon, 20 Oct 2025 23:41:04 +0000</pubDate>
</item>
<item>
<title>empty key data for 2021 Chevy Silverado 2500</title>
<link>/en/qa/136207/empty-key-data-for-2021-chevy-silverado-2500</link>
<description>after viewing the instructional youtube video from &amp;quot;MPC | How to use your Flashlink Lite C&amp;quot; and following the instructions correctly, I keep ending up with &amp;quot;EMPTY KEY DATA&amp;quot; with the following error message: &amp;quot;The module was not able the vehicles immobilizer data. Reconnect the module to the vehicle and follow the instructions from STEP 1 to sample the immobilizer data&amp;quot; however in the youtube video, the module is not connected to a vehicle only a PC. Please help.</description>
<category>Chevrolet</category>
<guid isPermaLink="true">/en/qa/136207/empty-key-data-for-2021-chevy-silverado-2500</guid>
<pubDate>Tue, 14 Oct 2025 02:24:35 +0000</pubDate>
</item>
<item>
<title>2022 Chevrolet express with evo-one 441, wanting alarm feature as well (horn honk with doors opened)</title>
<link>/en/qa/136123/2022-chevrolet-express-with-evo-one-441-wanting-alarm-feature-as-well-horn-honk-with-doors-opened</link>
<description>For alarm what additionally has to be connected? Do the door inputs come from data or need to be connected individually?</description>
<category>Chevrolet</category>
<guid isPermaLink="true">/en/qa/136123/2022-chevrolet-express-with-evo-one-441-wanting-alarm-feature-as-well-horn-honk-with-doors-opened</guid>
<pubDate>Mon, 06 Oct 2025 23:06:36 +0000</pubDate>
</item>
<item>
<title>Module reset due to limit</title>
<link>/en/qa/135890/module-reset-due-to-limit</link>
<description>

&lt;p&gt;&lt;span style=&quot;color:#000000; font-family:&amp;quot;libre franklin&amp;quot;,sans-serif&quot;&gt;Hello, can you PLEASE reset my EVO-ALL&amp;nbsp;&lt;/span&gt;Service #: 001A06328585 &lt;span style=&quot;background-color:rgba(0, 0, 0, 0.05); color:#000000; font-family:&amp;quot;YS Text&amp;quot;,-apple-system,BlinkMacSystemFont,Arial,Helvetica,&amp;quot;Arial Unicode MS&amp;quot;,sans-serif; font-size:14px; white-space-collapse:preserve&quot;&gt; Please help me reset the counter. I want it to work on my car again. Thank you!&lt;/span&gt;&lt;/p&gt;

&lt;p&gt;&lt;/p&gt;</description>
<category>Chevrolet</category>
<guid isPermaLink="true">/en/qa/135890/module-reset-due-to-limit</guid>
<pubDate>Fri, 12 Sep 2025 08:23:41 +0000</pubDate>
</item>
<item>
<title>THAR-X-GM8 work with a fleet vehicle</title>
<link>/en/qa/135429/thar-x-gm8-work-with-a-fleet-vehicle</link>
<description>Will the THAR-X -GM8 work with a fleet key vehicle? The truck is push start but does not have the smart key function on the driver door handle&lt;br /&gt;
&lt;br /&gt;
2024 CHEVY SILVERADO 2500/3500</description>
<category>Chevrolet</category>
<guid isPermaLink="true">/en/qa/135429/thar-x-gm8-work-with-a-fleet-vehicle</guid>
<pubDate>Fri, 11 Jul 2025 19:42:58 +0000</pubDate>
</item>
<item>
<title>Spark 2017  key</title>
<link>/en/qa/134760/spark-2017-key</link>
<description>

&lt;p&gt;I have a 2017 Spark key.&lt;/p&gt;

&lt;p&gt;I connected the Wire to Wire as per the instructions.&lt;/p&gt;

&lt;p&gt;&lt;a href=&quot;https://cdn02.fortin.ca/download/90461/EVO-ALL_IG_SAL_BI_CHEVROLET-SPARK_2016-2019_A_90461.pdf&quot; rel=&quot;nofollow&quot;&gt;https://cdn02.fortin.ca/download/90461/EVO-ALL_IG_SAL_BI_CHEVROLET-SPARK_2016-2019_A_90461.pdf&lt;/a&gt;&lt;/p&gt;

&lt;p&gt;&lt;/p&gt;

&lt;p&gt;When I press the key 3 times lock the switch will open but don&#039;t start and the light flashed 3 times red.&lt;/p&gt;

&lt;p&gt;&lt;/p&gt;

&lt;p&gt;When running the engine and shutdown by using the key and pull out then&amp;nbsp; i press the lock 3 times the vehicle runing! and i can put the key in and drive, but if I press the brake the engine stop and I cannot start again from the remote (If i try the switch will open but will not try to start) I must use the key again to start and stop the engine and pull out to I can start again by using the lock button with someone below firmware version!.&lt;/p&gt;

&lt;p&gt;&lt;/p&gt;

&lt;p&gt;Sometimes the engine starts and stop immediately.&lt;/p&gt;

&lt;p&gt;I tried firmware version&amp;nbsp; 70.46 &amp;amp; 70.41 &amp;amp; 70.42 &amp;amp; 70.43 &amp;amp; 70.44&lt;/p&gt;

&lt;p&gt;&lt;/p&gt;

&lt;p&gt;&lt;/p&gt;

&lt;p&gt;I want to reset both units&lt;/p&gt;

&lt;p&gt;SN: 001A07157086&lt;/p&gt;

&lt;p&gt;SN: 001A07501809&lt;/p&gt;

&lt;div&gt;&lt;/div&gt;</description>
<category>Chevrolet</category>
<guid isPermaLink="true">/en/qa/134760/spark-2017-key</guid>
<pubDate>Sat, 31 May 2025 22:27:40 +0000</pubDate>
</item>
<item>
<title>06 chevy silverado 1500 with viper 5704 remote start and evo all for bypass.</title>
<link>/en/qa/134014/06-chevy-silverado-1500-with-viper-5704-remote-start-and-evo-all-for-bypass</link>
<description>06 chevy silverado 1500 with viper 5704 remote start and evo all for bypass. what wire exactly needs to be cut and where would i need to add any relays if any?lock and unlock worked fine &amp;nbsp;but no remote start. any help appreciated please</description>
<category>Chevrolet</category>
<guid isPermaLink="true">/en/qa/134014/06-chevy-silverado-1500-with-viper-5704-remote-start-and-evo-all-for-bypass</guid>
<pubDate>Wed, 19 Mar 2025 01:31:04 +0000</pubDate>
</item>
<item>
<title>Remote programing with YELLOW light</title>
<link>/en/qa/133706/remote-programing-with-yellow-light</link>
<description>2006 Chevy Avalanche EvoOne 441 remotes. Programed module to get the YELLOW light on with ignition. Trying to program remotes but no blue light on antenna and no flash/horn. YELLOW light just stays on.</description>
<category>Chevrolet</category>
<guid isPermaLink="true">/en/qa/133706/remote-programing-with-yellow-light</guid>
<pubDate>Thu, 27 Feb 2025 16:22:39 +0000</pubDate>
</item>
<item>
<title>2014 Chevy cruze: Can I just remove the EVO-GMT7 and replug in my wires to remove the remote start kit?</title>
<link>/en/qa/133522/2014-chevy-cruze-can-just-remove-the-evo-gmt7-and-replug-in-my-wires-to-remove-the-remote-start-kit</link>
<description>Wondering if this can be removed and wont mess with my cars programming.</description>
<category>Chevrolet</category>
<guid isPermaLink="true">/en/qa/133522/2014-chevy-cruze-can-just-remove-the-evo-gmt7-and-replug-in-my-wires-to-remove-the-remote-start-kit</guid>
<pubDate>Mon, 24 Feb 2025 15:31:15 +0000</pubDate>
</item>
<item>
<title>Evo all/gmt4 module not connected/detected in flash manager</title>
<link>/en/qa/133319/evo-all-gmt4-module-not-connected-detected-in-flash-manager</link>
<description>

&lt;p&gt;
	&lt;span style=&quot;color: rgb(17, 17, 17); font-family: Arial;&quot;&gt;Evo all/gmt4 module not connected/detected in flash manager 4. It will recognize the flashlink2, i can upgrade the firmware, but the evoall/gmt4 unit is never recognized. I have a solid red light on the flash updater and a solid red light on the evo all in bypass mode, switch to remote start and the evo all has all the leds blinking a few times and it doesnt connect. when I shut down the program and restart it, the program recogognizes the updater plugged in but there is no firmware selected.&lt;/span&gt;
&lt;br style=&quot;color: rgb(17, 17, 17); font-family: Arial;&quot;&gt;
	
&lt;br style=&quot;color: rgb(17, 17, 17); font-family: Arial;&quot;&gt;
	&lt;span style=&quot;color: rgb(17, 17, 17); font-family: Arial;&quot;&gt;Update the firmware again and it accepts, and then every thing is the same as above. it seems like everything is communicating with the evoall flashing, but can never get unit connected throught the software. Is the module bad, servers down, bad flash tool? I tried a reset on the module again but same as above.&lt;/span&gt;&lt;/p&gt;</description>
<category>Chevrolet</category>
<guid isPermaLink="true">/en/qa/133319/evo-all-gmt4-module-not-connected-detected-in-flash-manager</guid>
<pubDate>Thu, 13 Feb 2025 09:23:42 +0000</pubDate>
</item>
<item>
<title>flashlink wont connect to evo all s# 001A06 682920</title>
<link>/en/qa/133271/flashlink-wont-connect-to-evo-all-s%23-001a06-682920</link>
<description>I think I reached the flash limit as the lights come on the evo all with the flash link but it will not detect oit. In bypass its a solid red light and in remote start its all the flashing at once. Any way to fix this? I tried the reaet procedure, but didnt work. Its for a 2013 silverado.</description>
<category>Chevrolet</category>
<guid isPermaLink="true">/en/qa/133271/flashlink-wont-connect-to-evo-all-s%23-001a06-682920</guid>
<pubDate>Tue, 11 Feb 2025 10:31:45 +0000</pubDate>
</item>
<item>
<title>I want to add shock sensor &amp; siren to evo-all on 2018 Malibu using GM6, how do i go about wiring?</title>
<link>/en/qa/133151/i-want-to-add-shock-sensor-%26-siren-to-evo-all-on-2018-malibu-using-gm6-how-do-i-go-about-wiring</link>
<description>Using Evo-All w/GM6 harness; OEM factory fob 3x Lock to remote start;</description>
<category>Chevrolet</category>
<guid isPermaLink="true">/en/qa/133151/i-want-to-add-shock-sensor-%26-siren-to-evo-all-on-2018-malibu-using-gm6-how-do-i-go-about-wiring</guid>
<pubDate>Thu, 06 Feb 2025 04:31:04 +0000</pubDate>
</item>
<item>
<title>I lost one of my Fortin RFK441 remotes. Can I purchase anoter one and program it to my RFK441 Antenna?</title>
<link>/en/qa/132274/i-lost-one-of-my-fortin-rfk441-remotes-can-purchase-anoter-one-and-program-it-to-my-rfk441-antenna</link>
<description>I have the evo-one on a 2020 Chevy Equinox. Everything works, but I lost one set of my keys. I need a replacement remote. I only have one of the original remotes left.</description>
<category>Chevrolet</category>
<guid isPermaLink="true">/en/qa/132274/i-lost-one-of-my-fortin-rfk441-remotes-can-purchase-anoter-one-and-program-it-to-my-rfk441-antenna</guid>
<pubDate>Wed, 08 Jan 2025 23:20:34 +0000</pubDate>
</item>
<item>
<title>I have a evo rs gmt4 remote starter kit for my 2011 Chevy Silverado standard key will this work?</title>
<link>/en/qa/132106/i-have-a-evo-rs-gmt4-remote-starter-kit-for-my-2011-chevy-silverado-standard-key-will-this-work</link>
<description>They keep sending evo rs ...is it the same? I see evo Gm &amp;nbsp;on the evo rs box it does also say EVO-GMT4</description>
<category>Chevrolet</category>
<guid isPermaLink="true">/en/qa/132106/i-have-a-evo-rs-gmt4-remote-starter-kit-for-my-2011-chevy-silverado-standard-key-will-this-work</guid>
<pubDate>Tue, 07 Jan 2025 05:01:49 +0000</pubDate>
</item>
<item>
<title>2015 Silverado  auto-locks a few sec after I shut it off. .How do I keep that from happening?</title>
<link>/en/qa/131712/2015-silverado-auto-locks-a-few-sec-after-i-shut-it-off-how-do-i-keep-that-from-happening</link>
<description>When I shut the Chevy Silverado 2500hd truck off (gas 6.0l), about 3-5sec later it just automatically locks. Never did that before. Is there a way to override this? It doesnt matter if my keys/remote is in the truck or not.</description>
<category>Chevrolet</category>
<guid isPermaLink="true">/en/qa/131712/2015-silverado-auto-locks-a-few-sec-after-i-shut-it-off-how-do-i-keep-that-from-happening</guid>
<pubDate>Fri, 27 Dec 2024 17:10:37 +0000</pubDate>
</item>
<item>
<title>Eqinox 2012</title>
<link>/en/qa/131376/eqinox-2012</link>
<description>I received evo /rs for 2012 Chevy equinox. &amp;nbsp;&amp;nbsp;No instructions can’t seem to get much from your site it lags a lot even with 5g. &amp;nbsp;What can I do?</description>
<category>Chevrolet</category>
<guid isPermaLink="true">/en/qa/131376/eqinox-2012</guid>
<pubDate>Sun, 15 Dec 2024 19:10:35 +0000</pubDate>
</item>
<item>
<title>changed vehicle during program then redid from start to finish , made a key,  plug back in it doesnt start</title>
<link>/en/qa/131372/changed-vehicle-during-program-then-redid-from-start-to-finish-made-key-plug-back-in-doesnt-start</link>
<description>chevy silverado 2500 go through process when plug it back in doesnt do anything</description>
<category>Chevrolet</category>
<guid isPermaLink="true">/en/qa/131372/changed-vehicle-during-program-then-redid-from-start-to-finish-made-key-plug-back-in-doesnt-start</guid>
<pubDate>Sun, 15 Dec 2024 12:21:05 +0000</pubDate>
</item>
<item>
<title>Dead unit or gremlins?</title>
<link>/en/qa/131091/dead-unit-or-gremlins</link>
<description>2004 Suburban LT&lt;br /&gt;
&lt;br /&gt;
Evo-One with Fortin 4 button 1 way remotes.&lt;br /&gt;
&lt;br /&gt;
Reset the unit several times. Here&amp;#039;s some more interesting info...the valet button doesn&amp;#039;t do anything. I&amp;#039;ve replaced the valet button as well as just touched the wires together and still nothing. So doing a complete 23 reset is not possible.&lt;br /&gt;
&lt;br /&gt;
Today I figured I would rewire the 6 pin harness, to eliminate the t connectors. No change.&lt;br /&gt;
&lt;br /&gt;
It goes thru the start sequence, clicks once and then just like the key was turned off. It will act like it does a remote take over as well. When running, if I press to &amp;quot;leave&amp;quot; the vehicle but have it stay running, it clicks like it&amp;#039;s ready. As soon as I turn the key it shuts down. It&amp;#039;s getting cold and dark and I have maybe a few hours on weekends to try to figure this all out.&lt;br /&gt;
&lt;br /&gt;
I have uploaded a video on YouTube.&lt;br /&gt;
&lt;br /&gt;
&lt;a href=&quot;https://youtube.com/shorts/85TdkOkl8Y4?si=04Yf5ICgBzh9n734&quot; rel=&quot;nofollow&quot;&gt;https://youtube.com/shorts/85TdkOkl8Y4?si=04Yf5ICgBzh9n734&lt;/a&gt;</description>
<category>Chevrolet</category>
<guid isPermaLink="true">/en/qa/131091/dead-unit-or-gremlins</guid>
<pubDate>Sun, 08 Dec 2024 19:31:08 +0000</pubDate>
</item>
<item>
<title>2013 Chevrolet 2500 HD -Starts once then won’t crank</title>
<link>/en/qa/130136/2013-chevrolet-2500-hd-starts-once-then-wont-crank</link>
<description>I have installed Evo All SN 001A07 468692 with T-Harness THAR-GM4 withRM942 remotes and MYCAR using hrn-11rs-01. &lt;br /&gt;
&lt;br /&gt;
The factory remotes work as well as the 942. &amp;nbsp;&lt;br /&gt;
&lt;br /&gt;
The truck will start once using the remote start and then just light up and “click”. &amp;nbsp;If I unplug the module it will work again. &amp;nbsp;&lt;br /&gt;
&lt;br /&gt;
From reading through the messages here I believe the issue is that I have flashed it too many times. &amp;nbsp;&lt;br /&gt;
&lt;br /&gt;
Any help would be great</description>
<category>Chevrolet</category>
<guid isPermaLink="true">/en/qa/130136/2013-chevrolet-2500-hd-starts-once-then-wont-crank</guid>
<pubDate>Tue, 12 Nov 2024 14:16:06 +0000</pubDate>
</item>
<item>
<title>Can&#039;t find lock/unlock wiring</title>
<link>/en/qa/130015/cant-find-lock-unlock-wiring</link>
<description>Working on a 2010 Chevy Traverse, photos show the pink and orange wire at the Bcm but it this situation those wires aren&amp;#039;t there, I try to find some others but can&amp;#039;t yet.. Evo RS4</description>
<category>Chevrolet</category>
<guid isPermaLink="true">/en/qa/130015/cant-find-lock-unlock-wiring</guid>
<pubDate>Sat, 02 Nov 2024 20:03:16 +0000</pubDate>
</item>
<item>
<title>Where to start?</title>
<link>/en/qa/130001/where-to-start</link>
<description>Ok, fighting this thing for months. I bought a new module, programmed it, installed it, get the same no start as I did with old unit. I took the new one and reset. Reprogram and tried again and still nothing. I can&amp;#039;t even get it to allow me to program the remotes to test the start function. So pulled it out, put the old one in and it tried to start after I pulled the OBD wire. Plugged it in and it started and ran for a few minutes and I tested everything. Great it works again...next morning, doesn&amp;#039;t work. Single light flash and nothing. I started it with the key, did a remote start transfer and it took over. I pulled the key out and it stayed running for about a minute, then stopped. I tried again, nothing. So after 8 hours, I tried to remote start and it did, ran for about 10 seconds and shutdown. What&amp;#039;s going on? Do I have a wire gremlin on the vehicle side? I disconnected all the harnesses wires, plugged them all back in and still nothing. Is there an alternative wiring?</description>
<category>Chevrolet</category>
<guid isPermaLink="true">/en/qa/130001/where-to-start</guid>
<pubDate>Thu, 31 Oct 2024 19:47:29 +0000</pubDate>
</item>
<item>
<title>Flashing EVO One for use with 2016 Chevy Cruze Limited and there&#039;s no option to use OEM key fob.</title>
<link>/en/qa/129749/flashing-evo-one-for-use-with-2016-chevy-cruze-limited-and-theres-no-option-to-use-oem-key-fob</link>
<description>I have an EVO One with a THAR-GM1 and was able to successfully program it (using the program button and key/ignition), after wiring it into my 2016 Chevy Cruze Limited Manual Transmission. However when I attempted to flash it using a Flashlink 4 and my laptop, I don&amp;#039;t &amp;nbsp;have an option to use the factory key fob. I double and triple checked the settings, but under OEM Key Fob and it only says that it&amp;#039;s not available. Am I doing something wrong?&lt;br /&gt;
&lt;br /&gt;
&amp;nbsp;&lt;br /&gt;
&lt;br /&gt;
Thanks in advance for your help.</description>
<category>Chevrolet</category>
<guid isPermaLink="true">/en/qa/129749/flashing-evo-one-for-use-with-2016-chevy-cruze-limited-and-theres-no-option-to-use-oem-key-fob</guid>
<pubDate>Tue, 22 Oct 2024 21:46:34 +0000</pubDate>
</item>
<item>
<title>EVO One with THAR-GM1 V2 in 2016 Chevy Cruze Limited Manual Transmission</title>
<link>/en/qa/129721/evo-one-with-thar-gm1-v2-in-2016-chevy-cruze-limited-manual-transmission</link>
<description>Hello all,&lt;br /&gt;
&lt;br /&gt;
I am getting ready to install an EVO One Module as a remote starter only, with a THAR-GM1 V.2 Harness in my 2016 Chevy Cruze Limited, with Flip Key and manual transmission. The wiring diagram only shows the Pink wire from the High Power (6 Wire) Harness being used. Does that mean I don&amp;#039;t have to hookup the other 5 High Power Wires, or are they required for the unit to function? I haven&amp;#039;t been able to find any wiring schematic for where the wires (aside from power and ground) hook up in my car. I guess I am unlcear on whether or not the GM Harness renders those other 5 wires unnecessary. &lt;br /&gt;
&lt;br /&gt;
Thank you in advance.</description>
<category>Chevrolet</category>
<guid isPermaLink="true">/en/qa/129721/evo-one-with-thar-gm1-v2-in-2016-chevy-cruze-limited-manual-transmission</guid>
<pubDate>Tue, 22 Oct 2024 10:59:04 +0000</pubDate>
</item>
<item>
<title>3x remote flash won&#039;t start</title>
<link>/en/qa/129563/3x-remote-flash-wont-start</link>
<description>2004 Chevrolet Suburban 1500, I&amp;#039;ve been having issues for 3 months now. I replaced brake switch twice, wire harness for brake switch, and still the same issue. If I unplug the brake wire from EVO-ONE, it would remote start. If the wire is plugged in, no start. This started after 3 years of module use, nothing changed. Now, EVO-ONE is doing a 3X light blink when trying to remote start, which is ready mode disabled. It&amp;#039;s an automatic transmission, it&amp;#039;s in Park, no parking brake on, still nothing. Last week I was able to bypass the brake switch with a separate switch to solve the other remote start issue, but 2 days later it&amp;#039;s doing the ready mode disabled. I&amp;#039;m about to give up, &amp;nbsp;rip this thing out and try a different brand.</description>
<category>Chevrolet</category>
<guid isPermaLink="true">/en/qa/129563/3x-remote-flash-wont-start</guid>
<pubDate>Sat, 12 Oct 2024 17:32:21 +0000</pubDate>
</item>
<item>
<title>Can not programm module</title>
<link>/en/qa/129508/can-not-programm-module</link>
<description>Hello! I buy 5 new module, Not one of the five modules is flashed. Help me please&lt;br /&gt;
&lt;br /&gt;
001A06 562668, 001A06 540339, 001A06481631, 001A06 503255, 001A06 540373</description>
<category>Chevrolet</category>
<guid isPermaLink="true">/en/qa/129508/can-not-programm-module</guid>
<pubDate>Mon, 07 Oct 2024 13:34:17 +0000</pubDate>
</item>
<item>
<title>rfk411 will not program</title>
<link>/en/qa/129264/rfk411-will-not-program</link>
<description>I have a 2011 silverado 2500hd standard key with a t harness and a evo all. i installed the rfk411 and i can not get the remotes to program. On the rf support do i need to be in h1 fortin or h2 fortin 2. I had these work on this truck before and i had to get a new igntion and i ahve not been abel to get them to reprogram since.</description>
<category>Chevrolet</category>
<guid isPermaLink="true">/en/qa/129264/rfk411-will-not-program</guid>
<pubDate>Mon, 23 Sep 2024 17:12:58 +0000</pubDate>
</item>
<item>
<title>Chevrolet spark 2020 push to start remote not responding to remote start</title>
<link>/en/qa/128784/chevrolet-spark-2020-push-to-start-remote-not-responding-to-remote-start</link>
<description>The Evo all-GM6 device was installed and programmed, but the remote that was programmed in the steps does not start the car with remote start, and the remote start only works with the other remote</description>
<category>Chevrolet</category>
<guid isPermaLink="true">/en/qa/128784/chevrolet-spark-2020-push-to-start-remote-not-responding-to-remote-start</guid>
<pubDate>Sat, 10 Aug 2024 10:18:04 +0000</pubDate>
</item>
<item>
<title>Por que el vehículo no arranca y pide pisar el freno</title>
<link>/en/qa/128181/por-que-el-vehiculo-no-arranca-y-pide-pisar-el-freno</link>
<description>se instaló todo el equipo pero el carro no se enciende y cuando hago el encendido remoto, el carro pide que presione el freno y el botón de encendido.&lt;br /&gt;
&lt;br /&gt;
Y cuando presiono el freno para que el carro se encienda con el autómatico ( SIN PRESIONAR EL BOTON DE ENCENDIDO ). Se enciende pero se apaga a los segundos.&lt;br /&gt;
&lt;br /&gt;
mi carro es un chevrolet &amp;nbsp;sonic LT 2019</description>
<category>Chevrolet</category>
<guid isPermaLink="true">/en/qa/128181/por-que-el-vehiculo-no-arranca-y-pide-pisar-el-freno</guid>
<pubDate>Thu, 23 May 2024 18:22:40 +0000</pubDate>
</item>
<item>
<title>2015 Silverado work truck with no fobs. Can i add a remote start with fortin remotes?</title>
<link>/en/qa/128063/2015-silverado-work-truck-with-no-fobs-can-i-add-a-remote-start-with-fortin-remotes</link>
<description>Ive installed 2 fortin systems before.</description>
<category>Chevrolet</category>
<guid isPermaLink="true">/en/qa/128063/2015-silverado-work-truck-with-no-fobs-can-i-add-a-remote-start-with-fortin-remotes</guid>
<pubDate>Sun, 05 May 2024 15:50:25 +0000</pubDate>
</item>
<item>
<title>Wire colors for  passlock for 2008 Chevy Impala</title>
<link>/en/qa/127930/wire-colors-for-passlock-for-2008-chevy-impala</link>
<description>Needing help with installing my passlock SL2V2</description>
<category>Chevrolet</category>
<guid isPermaLink="true">/en/qa/127930/wire-colors-for-passlock-for-2008-chevy-impala</guid>
<pubDate>Fri, 19 Apr 2024 17:51:31 +0000</pubDate>
</item>
<item>
<title>I purchased a single use token. It was never emailed to me</title>
<link>/en/qa/127613/i-purchased-a-single-use-token-it-was-never-emailed-to-me</link>
<description>Hello, i purchased a single use token this morning and still have not received a email with the code? I would like to know how many days to expect before I receive the code?</description>
<category>Chevrolet</category>
<guid isPermaLink="true">/en/qa/127613/i-purchased-a-single-use-token-it-was-never-emailed-to-me</guid>
<pubDate>Thu, 07 Mar 2024 20:00:48 +0000</pubDate>
</item>
<item>
<title>Problem with programming key bypass</title>
<link>/en/qa/126718/problem-with-programming-key-bypass</link>
<description>When programming for the key bypass on evo all cannot get it the flashing blue light when turn the key to on position I&amp;#039;ve reset and have had the module reset by you guys and am flashing correctly for 2011 chevy silverado what can I do to get the key bypass step programed?also I have the evo all with thargm4 harness with oem remote start fob and have flash link 4</description>
<category>Chevrolet</category>
<guid isPermaLink="true">/en/qa/126718/problem-with-programming-key-bypass</guid>
<pubDate>Wed, 17 Jan 2024 15:38:34 +0000</pubDate>
</item>
<item>
<title>What do we do if the car started the first try but will not start now?</title>
<link>/en/qa/126667/what-do-we-do-if-the-car-started-the-first-try-but-will-not-start-now</link>
<description>2020 Chevy Traverse</description>
<category>Chevrolet</category>
<guid isPermaLink="true">/en/qa/126667/what-do-we-do-if-the-car-started-the-first-try-but-will-not-start-now</guid>
<pubDate>Mon, 15 Jan 2024 15:56:58 +0000</pubDate>
</item>
</channel>
</rss>