Questions & Answers - Recent questions in Lexus

2017 IS-300

Mon, 25 May 2026 14:08:46 +0000

Hello. I installed a remote starter on a 2017 IS-300. I reprogrammed the firmware three times, but it didn't help. It programmed successfully, but when I pressed the button on the factory remote, the blue LED didn't respond (001A07213969). After that, I installed a different module, and it worked. What could be the cause?

T-harness plug and play for lexus GS300 2008

Sat, 09 May 2026 18:40:30 +0000

Tried to find a T-harness for gs300 2008 vin JTHBG96S385057260

but with no luck

please advise

guide 83801

Sun, 05 Apr 2026 15:31:05 +0000

Hello. Guide 83801 (2008-2014 lexus) is with 3x-lock (stand alone) or not?

EVO-ONE Remote starter firmware 0.82 RX400h

Tue, 17 Feb 2026 19:50:31 +0000

Can I use firmware 0.82 in the remote starter of Evo-One, so that i can wire 3xlock manual by (-) to the middle pin of the shock sensor to use the OEM Remote to start the car by 3xLock?

Or is there another firmware that will do the same function better for my car?

How to fix alarm coming on when remote starting car while vehicle is locked?

Thu, 15 Jan 2026 22:30:05 +0000

Hi all, I recently installed an EVO-ONE on my 2003 Lexus Is300. For some reason when my car is locked and I hit the remote starter the vehicle starts but the security alarm starts to sound. On the opposite end when the vehicle is unlocked, no alarm goes and it still starts. Not a huge burden but might be tricky if someone else at home wants to use it. My remote starter remote does not unlock and lock the vehicle as well. Any help is appreciated. Serial Number is 002BO4707522.

Lexys rx400h , evo one lte, everything is hooked up, when i push to start the car nothing happens?

Fri, 05 Dec 2025 20:36:51 +0000

Lexys rx400h , evo one lte, everything is hooked , vehicle starts using the evo start app but shuts dpwn after a few seconds, option D4 for hybrid is active, flashed a few times, also INT-SL+ wont program, the light stays solig red when i hit unlock button , please help!

EVO-ALL Flash limit reached

Sun, 30 Nov 2025 15:23:48 +0000

While trying to get the remote start to work, I kept getting the red/yellow flash from the module. So I've dcryptored the crap out of my module and now the flashlink tells me that I've reached the flash limit. How do I go about resetting it? EVO-ALL SN; 001A07 765592

Remote Starter Take Over Option - Lexus ISF

Thu, 20 Nov 2025 15:15:21 +0000

Hello,

I'm looking for a 2 way remote starter which has the take over option (my ignition will stay running when I open my door) for a 2010 Lexus ISF. Do you offer this? If so, can you let me know which product/s I need?

Thanks!

lexus es350 2007

Tue, 06 May 2025 04:24:47 +0000

HI PLAESE I FIT MY EVO ALL FOR LEXUS ES350 2007 WHEN I PRESS LOCK 3* TIMES THE CAR WILL START NORMAL BUT WHEN I OPEN THE DOOR THE CAR WILL SHUTDOWN DIRECT, IS THERE ANY SOLUTION TO MAKE THE CAR RUNNING WITHOUT SWITCH OFF IF I OPEN THE DOOR

Demarreur evostart sur lexus nx450h+ 2024

Sun, 13 Apr 2025 07:19:32 +0000

J’ai installer mon demarreur sur le lexus nx450h+ 2025 avec mon evo start lte avec un evo cut et un shock sensor avec alarme activé et je ne recois pas de notification lorsque il a une tentative de demarrage ou quand le shock a une vibration. En plus sur mon cell j’ai seulement la communication bluetooth, le net a un x dessus.

Evo-All and Door lock Harness

Thu, 27 Mar 2025 08:43:46 +0000

I have bought Fortin Evo All with EVO-Toyt6 Harness

I'm going to install this module on Lexus IS200 (2016)

1) I'm interested whether on Evo-Toyt6 Harness "Evo all" and "Door lock" harness must be connected to each other or not?

I have uploaded an image

2) What will happen if not configuring this optional one? (3)

Do I need INT-SL+ with 2008 Lexus IS250 or do I need Key-overide-All?

Thu, 02 Jan 2025 15:59:20 +0000

I have installed a EVO-ALL in my 2008 Lexus IS250, I got a INT-SL+ and followed those install instructions. I can't get the INT-SL to recognize the door lock from the door button. After further research, it looks like that module is only for domestic vehicles. It looks like I need the KEY-OVERIDE-ALL for imports. Can someone confirm? I found a specific install for the KEY-OVERIDE_ALL for the lexus, however its completely different than the guide than the EVO-ALL is showing.

I have also been unable to make the remote start work with the EVO-ALL. I got the RFK-411, data link connected it to the EVO-ALL, programmed the keys but nothing as far as remote start works. I

2015 LS460

Tue, 24 Dec 2024 11:47:30 +0000

Where can I find a factory remote start module?

2015 LS460

Tue, 24 Dec 2024 10:19:13 +0000

Hello. I installed evo-one on 2015 LS460. 002B04697112...When we want to start, the ignition turns on instantly and turns off. What to do?

2017 LS460

Sat, 09 Nov 2024 11:39:27 +0000

Hello. 2017 LS460 not on the list?

2006 Lexus RX400h hybryd. Evo one. Dash comes on for 10-12 seconds than shuts down. Parking lights 4 flash

Wed, 09 Oct 2024 08:47:57 +0000

2006 Lexus RX400h hybryd. Evo one with rf642. Dash comes on for 10-12 seconds after remote starting than shuts down. Parking lights 4 flash. I tripple checked ignition harness wiring, correct by the guide. I flased an other module but does the same thing.

SN:002b04 106970

Any idea?

EVO-One with THAR-TOY16 Programming stuck at step 7

Sun, 28 Jul 2024 22:25:15 +0000

Hi Fortin support team:

Vehicle: Lexus RX350h 2024 (Hybrid vehicle)

EVO-One GUIDE: #116181 Rev:20240513

Firmware: both 88.33 & 88.34

EVO-One S/N: 002B04659051

Programming stuck at step 7: The BLUE LED will not turn OFF, The RED LED will not turn ON.

Unable to add RFK942.

What should I do?

Lexus LX600

Mon, 22 Jul 2024 10:36:00 +0000

Hello. Does standalone (38-2) not work on Lexus LX600?

Programming flash memory has reached its limit. Please help me reset it . evo one SN:002B04 656341

Sun, 28 Apr 2024 19:50:41 +0000

EVO ONE SN:002B04 656341.

2009 rx350 key sense

Wed, 13 Dec 2023 00:38:01 +0000

i have installed EVO-ONE-942 and INT-SL+. The car lock, unlock, remote starts. Everytime i remote start the alarm set off. i follow Guide # 90081. i did hook up the key sense wire. but i didint see any 2 pin white connector shown in the guide. when i remote start the alarm set off so i have unlock and lock and the car stay running. if i cant find the key sense wire. can i change the setting to unlock before start then lock after?

2009 Lexus IS250 Evo One Install Help

Mon, 11 Dec 2023 12:10:26 +0000

I installed a Fortin Evo One in a 2009 Lexus IS250. I’m pretty confident that I have connnected all the right wires. The unit seemed to program right with the red light flashes and then blue flashes..etc.

So my concern is if I really need to use the optional module for the door locks? My plan was to use the OEM remote, but the remote starter is not activating with 3x lock. Do I really need the additional door lock module for this to work? Also, on the programming side, if I go to “wizard” mode it only shows “no oem remote” and can only pick an RF kit. If I go to “pro” mode, I’m able to pick 3x lock….etc. I’m worried that this is causing me an issue also. Can someone please help? Thanks!

Solid Red Light even after using dcryptor/adapter

Sun, 10 Dec 2023 18:07:15 +0000

After installing, as per instructions provided, there was only a solid red light on my module. I notified tech support, and the person sent an dcryptor adapter. I followed the instructions in that video as well, but the program states: "the module was not able to sample the vehicles immobilizer data. Reconnect the module to the vehicle and follow the programming instructions from STEP 1 to sample the immobilizer data." Now I feel stuck, because it seems as though the module doesn't connect to my car. Please advise.

What do I need to do to make the EVO-START app work with a previously EVO-TOY6 installed on a Lexus ES350 2016?

Fri, 08 Dec 2023 16:14:30 +0000

The already installed EVO-TOY6 is currently used with the OEM fog.

2010 Lexus RX 350 – EVO-ALL Stand Alone with ASCL6 CARLINK: Remote Start Not Working ( NO IGNITION, NO CRANK)

Thu, 26 Oct 2023 14:59:43 +0000

Issue: Remote start does not work when initiating the remote start command via factory remote (3X lock) and/or CARLINK App.

A few things that I noticed when trying to remote start the car:

The transmitter and CARLINK app are communicating with the EVO-ALL - when the remote start is initiated, the blue LED on the EVO flashes once and a solid red light illuminates after. During this time, no lights on the cluster/dash turns on and there is no crank.
The EVO attempts this process again with the same results. After the second failed attempt, the red LED on the module and the car’s parking lights flashed 3 times.
Next, I tried remote starting the vehicle using the idle mode.
- I started the car by stepping on the foot brake and pushing the START/STOP button.
- Once the car was running, I activated the remote start with the CARLINK app.
- The remote start count-down timer appeared on the CARLINK app which tells me that the command was sent, and the module is in the remote start mode.
- I stepped out of the vehicle and the dash screen notified me there was no key (car remained idling)
- CARLINK app still showed the count-down timer for the run time.
- I deactivated the remote start using the CARLINK app and the vehicle turned off.

I also checked to see if all the other commands were working properly by using the CARLINK app.

Lock/unlock doors – good.
Open/close back trunk/door – good
Parking lights – good
Vehicle lock and unlock status - good, shows on the app when the doors are locked or unlocked.
Battery voltage shows on app, (13V)

I’ve doubled and TRIPLE checked the wiring, making sure they were terminated as shown in the installation guide (GUIDE # 77041) and that all connections were secured.

I don’t know if I am having issues with the installation or programing. I tried resetting the evo and re-flashing it and also down-grading the firmware to 79.66 to match the firmware on the guide. I think I might have tried a different firmware version as well (in between 79.70 and 79.66) with no luck. I eventually got locked out of the EVO-ALL because the flash limit was reached. I ended up ordering a second EVO-ALL to started from scratch again and I encountered the same problem.

I confirmed that the car does not have a factory remote starter by pressing the factory remote Lock button 2X and holding it after; the car did not start. Furthermore, I removed the glove box to check if a factory remote start was present, and as far as I can tell, I did not see one. The location of the factory remote starter was referenced from an Automotive Data Solutions Inc. (FLCAN and ALCA TL2) installation guide. If you have more details about where else this might be, please let me know and I can check again.

Please HELP! What should I check next?

Here are some details about the EVO-All that is currently installed.

Manf Date: 04/2023
SN: 001A07499141
Firmware Flashed: 79.70
Hardware Inside 7.0
Setup Configuration
- *** SETTING PROTECTION = OFF
- A1-A11 = ON
- A12-A14 = OFF
- B1-B3 = OFF
- C1 = ON
- D1 = ON
  - D1.8 = ON
  - D1.10 = ON
  - All other D1.X = OFF
  - D2-D5 = OFF (Guide shows D4, Hybrid Mode- do I need to turn this on?)
- D6 = ON
- D7 = OFF
- SPECIAL FUNC = ALL OFF
- DATALINK PROTOCOLS = ALL OFF
- G = ALL OFF
- H SUPPORTED RF KITS = ON
- H2 = ON
Wire Connection (connected according to diagram):
- A8: Not connected - vehicle is equipped with factory hood pin so that status is provided via can bus, correct?

2007 Lexus GS350 - Issues with INT-SL+ recognizing door locks

Sun, 15 Oct 2023 00:33:12 +0000

I just wired up my EVO-ONE to my 2007 Lexus GS350. I followed the guide and ended up having to go through all the wiring diagrams to confirm which wires were correct. Just a heads up if you wanted to update the instructions as all the wiring is correct from the photos but most of the colours didn't match the vehicle and wiring diagrams. The photo shows an Avalon interior so that might possibly be why they are different.

I updated the EVO-ONE and INT-SL+ to the latest firmware and chose the correct year/make/model. I was able to program my key to the EVO-ONE with no issues, but I am unable to get the INT-SL+ to recognize when I press lock on the driver door. I've connected it to the same wire shown in the instructions (~door lock data) however mine is red in colour.

Is this the correct wire to use or is there something else I can try?

Thanks!

Lexus NX300 - Fortin EVO one with EVO start LTE cannot remote start with app

Tue, 26 Sep 2023 12:36:02 +0000

My EVO Start LTE can only see the status of the car but cannot control it. The remote control works for the EVO ONE with 3x lock, but using the app for EVO start cannot remote control my car.

One thing I notice is when flashing the firmware, there is no option to select EVO start LTE but only EVO start 2. Could this be the problem?

Please Reset Flash Limit on SN 001A07 014690

Sat, 12 Aug 2023 13:10:16 +0000

Hello, i am trying to master/factory reset and light is always solid red on my evo all. I am hoping all i need is a "flash" limit reset? SN 001A07 014690

I am unable to factory reset my evo all

Sat, 12 Aug 2023 13:06:39 +0000

I am unable to factory reset (via instruction). Always stays solid red. Any ideas? Its a BRAND NEW UNIT and updated/reflashed/etc with no master reset lock. NO IDEA!

2007 Lexus GS450h EVO ONE with INT-SL+ OEM Key doesn't work

Wed, 17 May 2023 19:59:37 +0000

I have EVO ONE Bypass firmware 0.20, Remote Start firmware 1.26 + INT-SL+ with 0.17 firmware. After programming my OEM remote it accepts it and I can see that on INT-SL+ module red LED flashs when I lock/unlock doors with my OEM remote conrtol, byt while car is remote started it is no action, I can use only my app to unlock doors. What can be the issue? what settings I need to enable on EVO ONE for my car and this set up to get it done?

2010 Lexus rx 350. Not starting with locklocklock. Has No factory remote start.

Sat, 29 Apr 2023 20:08:59 +0000

Push Lock/3x's and parking lights come on. No dash lights. No crank.

Verified TX/RX connections. Verified Steering lock IGN and Ground. Measured voltage at the module

connector. Verifed ground at module connector will light a bulb.

Read the other customer with a 2014 Lexus with a similar problem. So I looked at TX/RX again. Ohm connections.

And decided to ohm all connections with Evo all disconnected.

Everything checks.

What am I doing wrong? I have installed your product in other vehicles. I like the product.

sn# 001a07 283629

Current firmware is 79.69.

Do D6 and D3 only read ignition?

Thu, 20 Apr 2023 23:51:24 +0000

On the evo one are d6 and d3 only for starting the car with key? The immobilizer amplifier is fried and it seems they go on the ignition side after the cut wire so im wondering if they are necessary or if i can get away with putting them blank. Any information or thoughts would be awesome.

Install guide

Thu, 20 Apr 2023 13:49:13 +0000

02 gs300 I am looking for a simple install guide for the evo one without the t harness.

How does EVO-ALL protect from CAN attack?

Mon, 10 Apr 2023 14:59:55 +0000

Hi,

I recently heard about "CAN" attack. An attacker would break the headlight, and gain access to the CAN bus. Once they have access, they can have full control of the system, and will be able to unlock door and start the car.

Does EVO-ALL protect from such kind of an attack? As far as I understand, EVO module also plugs into the CAN bus to manage all the functionality.

where is door lock data wire? It said blue at driver boot. 2008 GX470

Wed, 29 Mar 2023 22:03:15 +0000

Can someone tell me exactly where is the door lock data wire is? It said blue at driver boot, but there are too many :)

Is steering lock wire mandatory?

Wed, 01 Feb 2023 20:29:36 +0000

Probably a really dumb question, but may I ask what the steering lock wire actually does? Is it required to start the car when using remote start function?

Thanks!

2016 Lexus is350

Mon, 23 Jan 2023 14:59:06 +0000

I got to the point blue led blinking with the ignition on, after turn off the ignition the blue led keep blinking, suppose to go off. Redo the step couple of times, and refrashed as well but never work. Always with the blinking blue and the remote didn't work.

Lexus ES300h 2017 lights flash 4x and doesn't start

Fri, 30 Dec 2022 14:26:05 +0000

Using evo all and rfk942 on 2017 lexus es300h. hybrid, pts.
Installed using harness and connected white/black to purple wire on start/stop switch.

Programmed without issues, dcryptor ran fine. Able to lock/unlock using both OEM remote and rk942 remotes.
When trying to start (with either the oem or rk942) the parking lights and the red led on the evo all flash 4x.

Have tried:
a11 hood switch off, reset and reflashing, tested all connections. confirmed D4, D6 enabled.

Instructions say this means ignition before start. Not sure what is meant by this. The French translates to ignition key detected before starting? I have placed both OEM keys at a distance and tried the rk942 to start and got the same result.

Device flash limit reached

Thu, 22 Dec 2022 21:53:25 +0000

Can i get my Flash limit reset SN# 001A06399888

no tach output, Fresh evo one install (no rf kit standalone)

Wed, 21 Dec 2022 10:09:42 +0000

2015 Lexus RX 350, finished evo all per guide. getting no tach output on diagnostic lights. (evo all 2022 hardware, firmware updated)

lexus gs450h L10 fsport 2012 PUSH TO START EVO-ALL does flash red and yellow.

Fri, 09 Dec 2022 14:08:03 +0000

Can someone help, when I connect EVO-ALL to car and follow instruction, it starts flashing red and yellow. According to instruction I have to dcrypt module, but when I try to do it, program says invalid key data. master restart didn't help.

SN #001A07 391294

lexus lx 500

Wed, 07 Dec 2022 13:41:39 +0000

Hello. What manual is suitable for 2022 Lexus LX500 (diesel) for evo-all (standalone)?

05 es330 cranks no start evo one

Fri, 11 Nov 2022 01:02:06 +0000

Installed all wires and double checked rx and tx. Step 5 does not flash quickly, only solid after holding button down. Have tried reflashing multiple times. Will start with key in barrel with rfk441.

module not blinking rapidly at step 5

Sat, 03 Sep 2022 13:48:10 +0000

Hello Team, I have gotten the RF Kit (RFK411) as advised but while trying to start the programming all over, I observed that the red light on the device remained solid as it was supposed to flash rapidly about 10 times as stated in step 5. I have tried reprogramming all over again several times but the red light still remains solid on step 5 and this has prevented me from going to the next step. Will the check for the Rx and Tx connections be via a remote connection to the module? Although I saw clearly that the red light blinked rapidly during the initial programming and several other times as attempt was being made to get the vehicle to start via the OEM remote without the RF Kit. It was after I made an inquiry and tried reprogramming all over again that I observed it was not blinking rapidly and still stayed solid when the vehicle was turned on with the press and release of the programming button. EVO-ONE S/N: 002B04 171979

PLEASE RESET FLASH LIMITS

Fri, 02 Sep 2022 11:42:18 +0000

service # 001A06417336

Thank you

Is the T-Harness needed to intsall Evo-One on a 2006 Lexus IS250 Automatic Transmission?

Thu, 14 Jul 2022 17:02:21 +0000

Hello Team,

Kindly clarify if the T-Harness will be needed for the installation of EvoOne device on a 2006 Lexus IS250 and i will appreciate if i can get a video for reference on the installation of EvoOne on same vehicle model.

Regards.

Autolights, foglights and high beams stopped working after installing EVO-RS TOY6 on 2017 Lexus NX200t

Sun, 20 Feb 2022 20:32:47 +0000

Just installed EVO-RS TOYT6 (EVO-ALL + TOY6) on 2017 Lexus NX200t for OEM remote start (3xLock) and works fine. The only issue is that autolights do not work (lights do not turn on even if it's dark outside) and foglights do not work, either.

EDIT: Also noticed high beams won't turn on, either. The "symbol" indicator shows up on the dash but the physical beam lights do not turn on.

Anybody has a fix for this?

Install Evo One on a 1999 Lexus Es300 Remote start crank over but won't start Help

Tue, 15 Feb 2022 17:52:19 +0000

	Install Evo One on a 1999 Lexus Es300

	Remote start crank over but won't start but will start with key in the ignition but won't stay run even with the key in the ignition

	Help. Thank you.

2015 Lexus IS 250 push to start remote start did work. but now yellow and red flashing on evo all

Fri, 28 Jan 2022 21:30:41 +0000

Everything was working perfectly til i tried to remote start again by lock ,lock, lock 3 times. Nothing happens but the evo all modules flashing yellow and red. TRY master reset and Dycrptor but Dycrptor said max reach. please help EVO-ALL SN# 001A07 252864

Why my Lexus GS300 2004 wan’t start just cranking with EVO ONE?

Sat, 25 Dec 2021 21:31:33 +0000

Hi there! I got problem with my EVO ONE RS. My Lexus gs300 2004 just cranking but wan't start the engine?

How do I get the parking lights to stay on when RS is activated and vehicle light switch is set to auto?

Sat, 18 Dec 2021 14:36:35 +0000

Hello Support, I completed a remote start on a 2014 Lexus LS460. The parking lights turn on when the RS is activated but only when the vehicle's light switch is set to off. If the light switch is set to auto the parking lights do not turn on with the RS active. Is there a way to leave the parking lights on auto and have them work with the RS active?