Questions & Answers - Recent questions in Nissan

Starter issues

Sun, 19 Jul 2026 14:35:20 +0000

My vehicle

Nissan Rogue Sport 2017

Oem remote start with key I added this to extend the range of remote start

My setup issues I have an evo all unit installed and working following the steps and guide I firstly had this unit installed around a 6 months the OEM starter went bad it was changed out and I reinstalled the unit with new updates the first time used I did not get any ideas of an issues but the following day after remote start the vehicle was making loud noises brush noise screeching and I cant describe it but it was very loud I open the hood and it seems like it was near the new starter and ideals if the remote start is messing up the vehicle. The current vehicle came with keys for remote start lock3× and a button for remote start.

Need to get installation guide

Thu, 28 May 2026 08:44:07 +0000

Need to get installation guide for Evo all in one device , my car is nissan xtrail t32, 2018 (Rogue). Push to start

EVO-ONE Module The current device cannot be flashed anymore

Wed, 04 Feb 2026 17:10:06 +0000

SN:002B04 748122

Date: 11/2025

Model: EVO-ONE
When I try to flash, it shows "The current device cannot be flashed anymore"
Please help to reset limits.

Thank you in advance!

How long do I have to wait after the flash-limited is been reset?

Thu, 08 Jan 2026 04:18:03 +0000

FLASH-LINK HAS REACHED THE LIMIT.

1 Answer

Problem with my Evo 2 start app garage settings will not work and my car location map is not working?

Thu, 08 Jan 2026 03:38:11 +0000

My remote start lock and unlock work fine on the app. I tried reinstalling the app several times with no success. Not sure if I am going to have to reflash my module. Not sure if it is caused by Android 16 causing software glitches or it's the app itself?

flash limit reached - reset?

Wed, 07 Jan 2026 18:32:13 +0000

FLASH-LINK HAS REACHED THE LIMIT.

PLEASE HELP ME RESET IT ,

FLASH-LINK SERIAL=005202036505

MODEL=EVO ALL

DATE=09/2025

S/N=001A07774271

2017 qx70 push the remote 3x and module clicks but dosent start

Mon, 22 Dec 2025 17:45:39 +0000

Light first red then red blue then red then yellow red then red blue then red then red yellow then red with 3 clicks

Can you please reset the dcryptor on my EVO-ALL SN: 001A07689414

Thu, 11 Dec 2025 22:26:35 +0000

Can you please reset the dcryptor on my EVO-ALL SN: 001A07689414

Can't login to Flashlink Manager

Sat, 06 Dec 2025 22:13:54 +0000

I tried logging on to the FlashLink Manager using the universal account and password

Account: flash@mypushcart.com

Password: MPCflash

But it keeps saying account doesn't exist or password is incorrect.

How do I login?

2013 Juke Key Bypass Programming procedure

Mon, 03 Nov 2025 14:59:47 +0000

Step one says to remove the battery from the fob. I did this, and it never says in all the steps after when to insert the battery back in the fob. what step do I put the battery back in the fob?

Secondary harness wiring to kick panel door lock wiring problem

Wed, 29 Oct 2025 23:48:29 +0000

I need help! I have the Evo one connected and it starts the car wonderful but I'm trying to track down the connection at the Driver's side kick panel to Lock and unlock the door. In the video You have on YouTube you're saying to look for a blue and gray wire but what I tracked down that locks and unlocks the door. Is the white connector that is pictured here and all it has is a blue wire a yellow wire and 2 purple wires with Grey traces. So I'm not sure what to hook my purple and purple with white trace wire up to coming from The secondary wiring harness provided with the Evo one. Let me know please? thanks I need help! I don't want to connect to the wrong wires and blow a fuse or burn something up inside the Evo one box. I need help to identify the right wires to connect to thanks

This is for a 2008 nissan pathfinder se

The engine turns off when the brakes are pressed and the anti-mobility system works

Sat, 23 Aug 2025 14:04:02 +0000

My car Nissan X-Trail 2022 T32 after installation EVO-ALL The engine works when you press the lock button three times, but when you press the start button once or twice or more in all cases, the anti-mobility system works. When you press the brakes, the engine turns off. EVO-ALL Sequence Number 001A07 716476
Structure Number JN1BT2MM2NW023196 I am in Saudi Arab

I hope to tell me what went wrong and what's the right procedure. Please give me the right steps to avoid the engine not going out.

My remote start isn't working it's flashing red and yellow

Mon, 11 Aug 2025 15:06:03 +0000

Tried my remote start and wouldn't work looked at the module and it's flashing yellow and red. To also state this was in the truck when I purchased it so I have no literature or anything on this. Any help would be appreciated. Evo one SN: 002B04 071021

anyone help with limit on dycrypting and flashing firwware

Fri, 08 Aug 2025 23:31:45 +0000

appreciate any help with resetting the limit, cannot flash or dycrypt : s/n 001A06827357

and what would be the right firmware to use for 2020 Nissan rogue standard key

thank you

Evo-Nist1 in nissan 370z

Wed, 06 Aug 2025 08:40:10 +0000

I insalled Evo-Nist1 in my nissan 370z 2013. i connect the brown wire to red brake light wire, the Door pin wire was already in the BCM so i join it with the orginal wire.i added the lock and unlock to the BCM also. when i connect the date wire the evo-all it flash all the three lights but nothing change. the car start normally and lock and unlcok. when i remove the data wire the car keep unlcok unlocking multple times.

i didnt install the bonnet switch.

please i need a soluation.

nissan armada 2019

Tue, 15 Jul 2025 09:22:21 +0000

hi plaese i have nissan armada 2019 iam trying to fix evo all with nis1 harness on step number 8 the blue light switch off at all is not flashing but when i switch off the car blue light will work all time can help plaese

Do I have to buy the Flashlink mobile to use this remote start?

Sun, 29 Jun 2025 20:57:25 +0000

I’m not sure if I need to buy the Flashlink mobile thing in order to install the remote start. I was not made aware that I needed anything else besides what came in the box. I also am having issues downloading the Flashlink mobile app on both of my computers.

Remote Start on Nissan Micra 2024 Standard-Key

Sun, 08 Jun 2025 21:36:47 +0000

I currently acquired what this page is known as Nissan Micra, currently I see that only the 2015-2019 models are handled, but the model I buy is 2024 as here in mexico is still marketed, but I would like to acquire a remote start for my car, I currently already have one installed in a Nissan Versa 2022 and works great, but I would like to know if despite not having one directly for this model on the page, there is one that could be compatible with my Nissan Micra 2024, is automatic transmission with a standard key ignition. Maybe it is compatible with the same models that are used in the micra 2019, but I would like to know if someone already made the attempt.

Greetings, thanks.

plug and play Evo All remote starter go on a 2023 Nissan Frontier Push to start.

Mon, 31 Mar 2025 18:38:21 +0000

I know the red and black wires go to OBD2 plug but do not know which wires they go to

Can i get my updater reset please my number is 001A02015448

Sun, 23 Mar 2025 15:10:03 +0000

NEED HELP WITH A RESET THANKS

Alarm goes off when using app for EVO One with LTE module on 2020 Nissan Armada.

Mon, 17 Mar 2025 21:15:28 +0000

I've mostly successfully installed my EVO One with LTE module on my 2020 Nissan Armada. App works great for locking, unlocking, and remote starting. Factory key fob works as expected. However, if I unlock with the app and open the door without having a key fob with me, the car honks like the factory alarm is going off. Given that the unlock and lock functions are working, I believe the pins added as the guide shows are functioning properly, but for some reason, the alarm is not being disabled when coming from the EVO One. I've tried adjusting option 14.2 to 14.1 per another similar post, but that didn't do anything. We've mostly been living with it as the described trigger doesn't happen often, but any help would be appreciated to get it sorted out.

Please reset device, I have reached my Dcryptor limit

Mon, 17 Feb 2025 16:25:58 +0000

S/N 001A07 047048

Thank you

I have a hard time understanding the programing of the evo-start,

Thu, 23 Jan 2025 21:19:58 +0000

nissan versa 2008 manual,

got the evo-one with 442 remote, all good,

Trying to add the LTE module to my assembly, but cant figure the sequence properly,

DCryptor Transfer Error

Sat, 18 Jan 2025 20:45:24 +0000

I have a Nissan Armada 2021.
I have installed the unit SN: 001A07 679868

The unit programmed to the car correctly. All the lights lights flashed in the way the instructions say.
when I come to the computer and go to DCryptor, after I click send data it says ERROR: transmission failed check usb connection. And then it says Receive Error.
Does it every time not matter what I do.

What can be done?
Car now has a key system failure error.

Nissan Cube 2013

Thu, 16 Jan 2025 14:10:40 +0000

Hi could you please reset my evo-one serial number 002B04 700870

I have a yellow and red lights flashing when I connect the heavy wages connector.

I have tried to resetting with the valet switch but still flashing.

Any help will be appreciated.

This module is brand new.

X trail 2024

Sat, 11 Jan 2025 07:42:32 +0000

Nissan X trail 2024 software is not on website, so I have 2 quetions

1- is nissan X trail 2024 is the same with rouge 2024 software?

2- is can be available soon?

best regards

2011 Nissan Rogue - Auto headlights stay on

Sun, 05 Jan 2025 17:49:19 +0000

2011 Nissan Rogue w/ Intelli-Key EVO-ONE with T-Harnesses.

When headlights are set to AUTO and a 3x Start is triggered the lights stay on after the remote start either times out or is manually stopped via the key fob or brake input. Door trigger wire (Dark Blue) doesn't seem to have any effect on this. I even tried to ground it out directly to see if it would turn the lights off.

Anything else to try?

Activation number lost

Sat, 28 Dec 2024 00:00:12 +0000

I lost activation cord I was wondering if I can get it get another 1Nissan 2002Altima evokey

Dcryptor Limit Reset

Wed, 25 Dec 2024 00:19:00 +0000

Can you please reset the dcryptor on my EVO-ALL SN: 001A07 414611

thank you

Red and yellow light flashig alternately after bypass programming.

Fri, 13 Dec 2024 20:23:34 +0000

Evo One with THarn 5? Nissan Frontier 2016It is three harneses: Ignition main one, Immobilizer and OBDII generic. And also installation harnes with white connection.Flashed many times, tryed some options, it goes OK to the end, when i turn the key off red and yellow lights start flashing alternatly. Wires checked many times. Used instalation guide 79451. Evo One SN: 002B04696651. During programming at the step 8 i have flashing rapidly yellow light, but when i turn key into OFF position, red and yellow lights appear flashing alternately. NOW I AM NOT ABLE TO START THE CAR WITH ITS ORIGINAL KEYS.

Does the NISSAN NIST4 wiring harness require an RF-A2A adapter for a 942 remote kit?

Mon, 09 Dec 2024 20:13:53 +0000

It looks like the NIST4 harness is already rigged up for the Fortin remote kits based on the blue plug that is present? Or does it still require the RFa2A adapter cable to properly split the serial data?

Why alarm went off after the remote start (3xlock)?

Fri, 29 Nov 2024 18:46:13 +0000

Do you know why the suv alarm went off after the remote started the vehicle? Is there any option I forgot to select? Setup as stand alone with 3x lock to start. SN: 001a07 531903 2018 Nissan rogue sport

Sequence

Mon, 25 Nov 2024 21:46:13 +0000

Bonjour,

J'ai un démarreur model FTX 94 installé sur une Nissan Sentra 2021 manuelle avec bouton poussoir. Lorsque je descends temporairement du véhicule (par exemple pour la poste) si j'applique le frein à main, le moteur s'arrête automatiquement lorsque j'engage la première vitesse lorsque je veux repartir. Si je n'engage pas le frein à main, aucun problème. Quelle est la séquence que je dois faire pour pouvoir redémarrer sans que le moteur ne s'arrête lorsque je quitte temporairement le véhicule de façon sécuritaire (avec frein à main) ?

Merci à l'avance et Bonne fin de journée

2022 Nissan Armada restarts on its own after 5 seconds after turning off!

Mon, 25 Nov 2024 17:23:10 +0000

The car starts fine now with the remote start. But after turning the car off using the button on the dash, the car restarts on it's own after about 5 seconds. Then will turn off and stay off after pushing the dash button again. And now I also have a key fob error on my screen.

Nissan Frontier factory fob 3x lock to start?

Wed, 20 Nov 2024 12:58:22 +0000

Is there a special process for enabling lock x3 to start for a Nissan frontier? It's offered by competing remote start vendors (probably using Fortin system). I found a guide for enabling via Link software 3x lock to start but the NIS5 guide does not mention it. If enabled via link app in the module, is that all that needs to be done alongside the wiring instructions? The module should have the inputs internally to work it out from what I can see in the diagram. It would be down to the module logic which I don't know the details of.

Dcryptor limit has been reached on this car. Can i have it reset?

Sun, 17 Nov 2024 16:17:58 +0000

SN: 001A07526844

Could this remote start make body control module failures?

Tue, 12 Nov 2024 21:49:31 +0000

I had this remote start since 2018, Last week I went to local nissan dealer for a extra key and key programming, after they attempted, the technician told me the body control module was failure because the after market fortin remote start, so I needed replace BCM, were they correct? And can I put remote start module back?

2016 Nissan Altima PCM humming sound and park lights staying on

Thu, 07 Nov 2024 20:47:41 +0000

Installed compustar alarm with remote start using a EVO-NIST4 and diagram75491, d2d cable being used. For some reason the PCM is humming and the park lights are on, what can be the issue? Do I change out the power wire fuse to a 1 amp since it comes with a 30 but I am not using those, just the D2D as the diagram says.

what is the option to set for the car to locked and shutoff the parking lights after the remote start timeout (15mins).

Sun, 03 Nov 2024 01:20:57 +0000

Vehicle: 2018 Nissan Rogue Sport SN: 001a07 531903

Problem: remote start the vehicle (3x locks), car started with no issue. However if I don't make it to the car after 15mins, vehicle shutoff as expected, but the vehicle has unlock and parking light kept stay on and kill the battery.

Is there setting on this unit to prevent this 2 issues. (locked after shutoff and turn off the parking light)

Appreciated your help!!!

what's the best setup for a 2010 370z manual push button start

Sat, 19 Oct 2024 15:08:14 +0000

I'm looking for a remote start alarm with LTE functions for a 2010 370z

refus de demarrer

Tue, 08 Oct 2024 05:06:54 +0000

Bonjour, je possede un Altima 2009 Manuel. MA batteries est timber vide. apres une recharge complete , Mon vehicle ne demarre plus, et ne reconnais plus MA pedale d embrayage, malgre que j appuie dessus

2015 Titan horn chirp

Sat, 01 Jun 2024 20:12:34 +0000

I am trying to get the horn to chirp on remote start, as well as locking. 2015 Nissan Titan EVO-ONE Ser 002b04275287. I measured the orange/black for a -ve pulse, and do not see anything. Am I missing an option?

evo-one-nis5

Wed, 20 Mar 2024 19:32:16 +0000

Bought from a ebay seller selling your stuff. I contacted them an they said plug and play so i bought. Well i got it hooked it up tried to program and i get yellow light on and turn key and the red light dont come on to program. I did hook it up to my computer with the flah device and programmed it and flashed it. Still nothing. Ebay seller has been giving me a run around saying its your problem not theres. I just need some troublshooring help toi get it to work. The ebay seller then told me i needed a rf so i got one of them from them and re flashed the device for it installed it back in and still does nothing. Whats best way to get help troublshooting

Nissan 2020 NV2500 20 pin connector location

Tue, 12 Mar 2024 09:01:34 +0000

The purchased wiring plan does not have a location or picture for a 20 pin connector which has the emergency brake, dome light and truck pin, please help with location and any other knowedge. Thanks

2019 Qashqai vehicle has no crank no start when the module is plugged in.

Sat, 09 Mar 2024 19:50:57 +0000

2019 Nissan Qashqai, automatic, key-start. Installed Evo-all with T-harness. Stand alone install.

Evo-all programmed fine. Got the correct lights when programming, dcryptor went through fine. Installed the module back in the vehicle after dcryptor, the vehicle will not crank / start. Unplugged module, left the t-harness connected, vehicle starts fine (with a bunch of codes). Cleared the codes, re-installed Evo all module, no crank / no start.

Also, the evo-all module does not light up / respond to the vehicle FOB (I.e. no light flashes when pressing lock or unlock)

Things I have done so far: checked t-harness (pin location, made sure plugs are seated properly). Removed t-harness, vehicle starts fine, re-installed t-harness, vehicle starts fine, re-installed Evo all module, same issue, no crank / no start.

Downgraded firmware to minimum, no changes.

SN 001A07 284515

Current firmware loaded - 72.52

I have not tried to replace evo-all with a different one.

Could the evo-all module be bad?

Thanks.

EVO ALL GUIDE #105331 - Confusing Language

Mon, 05 Feb 2024 23:43:26 +0000

Installing stand-alone on a 2020 Nissan Frontier PTS. The Frontier has a factory hood switch for alarm functions. The config / options section of the guide states to set A11 to OFF if no hood pin. Does this imply to set A11 to ON in this circumstance? And I assume the blue hood pin wire is moot in this situation, or does it require grounding as the full diagram illustrates? A little confused on the intent.

Fortin EVO-ALL 2015 Nissan Rogue - Locking/Unlocking While Driving

Mon, 22 Jan 2024 13:07:08 +0000

Just installed an EVO All with the Nis3 Harness last night. While driving the car the unit unlocks and locks while flashing the turn signals every few seconds.

I am curious as to what this could be. I've updated all firmware and enabled all unit options that were in the install manual.

What could this be?

R35 GT-R 2015 push to start only lights turn and no engine start ! I have EVO -NIST1 !

Thu, 18 Jan 2024 11:43:01 +0000

Hello

We have problems installing EVO-NIST1 on a Nissan GTR 2015 and we have followed what fortin said on the instructions and it dont work and also the the instructions fortin has for finding out whats wrong but i dont work as it should !

Between this 2 instructions there is different diagrams with the 2 instructions and that do not make it easier and when plugging in the box should the button be push down or not ?

When programing folloving the lights and the instructions the lights jumps over steps !?

What flash should be used standalone or the other one !?

when pushing the button 3 times only lights but no engine start it never even try to start !?

When disconecting the box every thing works normal.

EVO-ALL number SN: 001A07 535353

Can any one help us in any way to sort this out !

please reset my flashlink 002505 112508

Sat, 13 Jan 2024 12:58:37 +0000

which version should i be using for my 2020 Nissan Frontier push to start?

Stuck on Step 4

Thu, 04 Jan 2024 06:44:09 +0000

2012 Nissan Rogue Intelli-key using T harness NIS 2. I cannot get passed step 4. The yellow light never flashes it doesn't change at all after pushing button any amount of times. I went through the troubleshooting guide and I don't have power on yellow wire, I also reversed the can-bus wires which didn't help. The fob was placed 40 feet away inside the house next to the spare keys we have for this vehicle.