Questions & Answers - Recent questions in Volkswagen

install remote-starter in volkswagen touareg 7l 2008

Wed, 15 Jul 2026 13:32:21 +0000

Iwant to install a remote-starter and wiring t-harness in a volkswagen touareg 7l 2008 Europe,

which exact model do i need??

EVO-ALL cannot program sacrificied key in a standlone installation for Tiguan 2020 PTS

Thu, 11 Jun 2026 15:08:31 +0000

I am trying to setup a standalone installation for Volkswagen Tiguan 2020 European Trim with PTS and with digital cluster
I have wrapped the sacrificied key (even tried an oem ring) and connected the wiring following the guide # 94761

The ignition is not turning ON during programming (seems that Evo-All is not getting the key data from pin D5 and hence not sending it via pin D4 to the vehicle)
Hence when i press ingition ON during progamming the car tells me to get the key inside the vehicle

Evo-All SN: 001A07 026604
Date: 05/2019
Evo-All FW: 61.35

Sacrificed Key
Sacrificed Key_2
OEM Transponder Antenna Connection
OEM Transponder Antenna Socket Front View

Activation Key Invalid

Sat, 25 Apr 2026 21:11:54 +0000

Hi I jsut puchased the Fortin One 442 and I am trying to get the diagram but the site is stating that the code is invalid, how can I get a code?

EVO-ONE SN: 0Q2B04 093895 For which car model is it programmed?

Fri, 10 Apr 2026 20:46:11 +0000

EVO-ONE SN: 0Q2B04 093895 For which car model is it programmed?

2018 Tiguan (STD KEY) with THAR-VW6 sending constant voltage to ignition switch

Fri, 20 Mar 2026 18:44:37 +0000

I have a 2018 Tiguan MK2 with a standard key and automatic trans.

I had installed the THAR-VW6 and had my EVO-ALL on firmware 64.10.

With the T-harness installed, even without the EVO-ALL connected, the car's switch is receiving a constant high voltage and the vehicle will start with the key in the on position and pressing the break without turning the key.

This is also an issue with the vehicle's auto stop-start feature.

Because there is a constant voltage being sent from the ignition switch, the car will send an EPC error and the engine will not auto stop-start due to error.

I've tried turning on Push-to-Start; no change. in fact, this option turned on makes it so the car doesn't even try to start with the LOCK-LOCK-LOCK command.

VW Tiguan 2012 EVO-ALL

Sun, 08 Mar 2026 20:47:56 +0000

EVO-ALL , I install Fortin FlashLink Manager, The Flashlink adapter failed to connect to module, I press button "retry detection" red light illuminate on module, after couple seconds i see again to "retry detection", what can be a connection problem?

Flash limit brand new out of box

Wed, 18 Feb 2026 22:23:10 +0000

While trying to debug a wiring issue, I tried flashing an EVO-ALL unit too many times. The flasher now says that I reached the flash limit has been reached. Could you please reset the flash limit? The serial number of the unit is 001A07 801272

Evo All the car doesn't start

Fri, 13 Feb 2026 20:29:21 +0000

Hi. I installed Evo-All on the my Volkswagen Passat B7 2.0TDI 2013 year whith standard OEM key.I used the THAR-VW6 wiring harness. Firmware version 75.40. I trained the module on the car. Then the decryptor cenerated a code , all successful. But the car won't start with the OEM key fob. The relay in the module clicks , the red light comes on , then the orange light comes on , and the car radio turns on. But the engine doesn't start, and the dashboard doesn't turn on. I connect all the connectors according to the THAR-VW6 instructions. I didn't connect the wire to the brake pedal ( my car doesn't require pressing the brake to start ) I didn't connect the wires for the start / stop button, as I don't have that button. I used the lock/lock/lock combination to start the engine. Where should I connect the separate yellow wire ( yellow ignition) ?

Hi, can you please reset my EVO ALL?

Fri, 13 Feb 2026 16:11:52 +0000

Hi. Can you reset my Evo-ALL please?

S.N : 001A07 801355

Thank you!

le tiguan 2018 ne demarre pas, la cle valet entourée de fils ne semble pas fonctionner

Sun, 25 Jan 2026 22:42:37 +0000

Quand on actionne le demarreur, on peut voir sur le tableau de bord qu'il ne voit pas de clé. il essaie 2 fois et barre les portes. les lumieres du vehicule flash 1 fois. J'ai 10 tours de fils autours de la cle valet.

Merci de m'aider

Reset My Evo-All

Mon, 05 Jan 2026 14:32:11 +0000

Hi, can you please reset my EVO ALL? SN: 001A07 774599

Thank You

No yellow light when trying to pair rfk411 remotes to Evo-All

Tue, 30 Dec 2025 19:20:48 +0000

Once I get get the red and blue light, once I turn key to on/run no yellow light

EVO-ALL red LED on continuously and can’t reset.

Mon, 29 Dec 2025 01:04:24 +0000

EVO-ALL sn 001A07 707397 is not getting past step 5 of decryptor programming (pg 6/12 guide 62591). After waiting some time I turned off the ignition and unplugged cables from the Evo-All to attempt another programming cycle but the red LED illuminated and won't go out. I attempted a master reset where I installed firmware .99 and then attempted reset again and no change. Can some one shed some light?

2013 Passat

Wed, 24 Dec 2025 17:19:07 +0000

Hello. I installed an Evo-ALL with a TB-VW bypass module on a 2013 Passat(key). In cold morning, the car started having trouble starting, even with the key. Everything worked fine during the day, but on a cold morning, problems developed. Immobilizer error. The customer demanded a refund, so I removed everything and refunded him. It would have been better to have a chip (a clone key, right?), but I still have a few of those bypass modules left.

DCRYPTOR'S LIMIT HAS BEEN REACHED FOR THIS Car

Mon, 22 Dec 2025 22:54:10 +0000

Hi! Can you solve my problem please for SN: 002B04 713031

Thank you!

Hi Can you please reset my Module Fortin Evo-all SN:001A07 732062

Sun, 21 Dec 2025 14:41:39 +0000

Hi Can you please Reset my module Fortin Evo-all SN:001A07 732062

Thank you

2003 volkswagen jetta tdi- no CAN input data after successful programming

Fri, 12 Dec 2025 21:14:51 +0000

using evo-one with rfk-441.

regular installation (no t-harness), firmware and software update with guide standards. successful programming in last step (blue blink key on).

\this vehicle has immo delete (metal key blade starts)

now when trying to program remotes no brake input detected to perform remote programming.

performed reset and even went as so far to swap evo one units. am i using wrong firmware or hardwire brake input?

2014 vw passat tdi

Mon, 01 Dec 2025 14:14:42 +0000

Is it any software update since 2021 for this specific vehicle (2014 vw passat tdi)? Thanks for your time!

Volkswagen Golf 2017 Push-to-Start -Digital Dash

Wed, 12 Nov 2025 18:29:19 +0000

I have the EVO-VWT1 system installed in my VW Golf no key sacrifice. I am wanting to upgrade the dash from analog to digital. What changes if any do I need to make to my current system to keep the same functionality

Can i get my modules reset

Tue, 21 Oct 2025 16:10:05 +0000

Pretty sure i erased the key data by accident. Evo all s/n 001A07304628

How to reset rfk411

Sat, 18 Oct 2025 19:04:35 +0000

I had to reset my module got it working perfectly again. But im having trouble getting my rfk411 button to respond to my evo all is there a way to reset it?

Issue with lock/unlock external input control signals

Mon, 13 Oct 2025 20:36:17 +0000

I have a 2011 VW Touareg and have installed an evo-all unit with the t-harness. Everything seems to be working ok but need help with pins a2 and a3. When providing a negative pulse to a3 it cycles the ignition on for a few seconds and turns off. It does unlock the doors but not sure why the ignition turns on. The lock wire seems to function normal. Is this a setting that needs to be adjusted ?

Can i get my modules reset

Fri, 03 Oct 2025 23:50:26 +0000

Evo all s/n 001A07304628

WHICH SETUP INCLUDING THE 'T' HARNESS IRRESPECTIVE OF COST FOR VW GOLF 5 2006 GTI AUTOMATIC DSG(STANDARD KEY)?

Wed, 17 Sep 2025 10:22:42 +0000

Hello,

which setup (plug-n-play) including the 'T' harness is best for my VW Golf 5 GTI 2006 automatic DSG (standard key)?

regards,

KAGE

Dcryptor limit has been reached for this car, please reset?

Mon, 15 Sep 2025 01:47:01 +0000

SN: 001A07 694993

I've installed the EVO ALL-LTE w/ THR-VW3 and TB-VW, using guide #65601, on a 2018 VW JETTA (standard key). I've checked the wiring over twice and then begun programing, but there is a problem in step 14 as the yellow LED stays solid, the red LED never turns on and both red and yellow LEDs do not alternate at the end of this step, I've used the TROUBLESHOOTING GUIDES step-by-step guide type tool, with no luck and now i have reached the Dcryptor's limit for this car after having attempted the programing several limes over.

Help please.

Firmware version: 75.[41] Hardware version: 7.0

Will factory unlocking and locking by touching the door handles work with evo all and 2 way fortin remote on 2016 golf?

Tue, 26 Aug 2025 11:43:10 +0000

Will factory unlocking and locking by touching the door handles work with evo all and 2 way fortin remote on 2016 golf?

DCRYPTOR'S LIMIT HAS BEEN REACHED FOR THIS Car

Mon, 18 Aug 2025 20:33:27 +0000

DCRYPTOR'S LIMIT HAS BEEN REACHED FOR THIS CAR (NEED HELP TO RESET THE LIMIT)

Sn: 001A07597527

DCRYPTOR'S LIMIT HAS BEEN REACHED FOR THIS CAR (NEED HELP TO RESET THE LIMIT)

Sat, 16 Aug 2025 21:00:02 +0000

DCRYPTOR'S LIMIT HAS BEEN REACHED FOR THIS CAR (NEED HELP TO RESET THE LIMIT)

Sn: 001A07597527

Flash Limit reset

Sat, 22 Mar 2025 02:33:09 +0000

Please reset my EvoAll SN: 001A07 470293

Thanks

When you can't find the brake pedal wire

Mon, 03 Mar 2025 14:19:16 +0000

https://youtu.be/m2uq6IW07dg

Will the evo-vwt3 work on my VW Passat 2018 standard key and where can I find install instructions

Mon, 10 Feb 2025 13:00:17 +0000

Also will factory fab work

PTS vehicle w/manual transmission can be driven w/o the key when remote started.

Sun, 02 Feb 2025 14:37:28 +0000

Hello, I installed a EVO-ONE stand alone on a 2023 VW Jetta GLI PTS manual transmission. I had to bring the key to my girlfriend this morning because she succeeded (unintentionally) to leave with the car that she had remote started with the OEM key (3x lock). In the past, she once forgot to bring the key, but when she pressed on the brake pedal to release the parking brake, the engine has stopped.

But this time the engine kept running, and she had no message stating that the key was not in the vehicle in the cluster.

-The module has been programmed with Flashlink manager and a Flashlink 2 on March 27th 2024 with the most recent firmware at this time.

-The battery of the sacrified key has been removed, and it has been tied far enough from the transponder antenna located on the steering column.

-The module was installed in accordance to the guide #99681.

Is there any chance that a firmware reflash could resolve this issue?

Thanks!

Le véhicule PTS transmission manuelle peur être conduit sans la clée lorsqu'il est démarré à distance.

Sun, 02 Feb 2025 13:55:29 +0000

Bonjour, j'ai fait l'installation d'un EVO-ONE stand alone sur un 2023 VW Jetta GLI PTS à transmission manuelle. J'ai dû aller porter la clée de la voiture à ma conjointe ce matin parce qu'elle a réussi (sans vouloir) à partir avec l'auto qu'elle avait démarré à distance avec la clef d'origine (3x lock). Il lui avait déjà arrivé d'oublier d'apporter la clée, mais en appuyant sur le frein pour relâcher le frein de stationnement, le moteur avait arrêté.

Ce matin l'auto n'a pas arrêté et n'a pas mentionné dans le tableau de bord que la clef n'était pas dans le véhicule.

-Le module à été programmé avec Flashlink Manager et un Flashlink 2 le 27 mars 2023 avec le plus récent firmware à cette date.

-La pile de la clée d'origine qui a servi à l'installation est retirée et il est attaché suffisament loin de l'antenne de transpondeur de la colonne de direction.

-Le module a été installé en suivant le guide # 99681 à la lettre.

a-t-il possibilité qu'une mise à jour du firmware puisse corriger le problème?

2012 Beetle says depress clutch when trying to remote start

Sun, 26 Jan 2025 18:15:54 +0000

BCM wire color is different from guide for clutch bypass -

I wired to pin 51 and when it tries to remote start it says depress clutch on dash. If i press clutch in the remote starter works.

Trying to understand if this is the correct pin on bcm used .

EVO-ALL-RS-FV6 for Vw Tiguan 2011

Thu, 16 Jan 2025 13:37:26 +0000

Hi. I bought this EVO-ALL-RS-FV6 for 07-2010 Tiguan. I installed it. Firmware 75-41. Hardware 7. I installed the options. The first time when programming the key decryptor, I pressed and held the module button, the LED blinked, everything was correct, it saved the keys. I connected the module to the flasher and it transmitted the decrypt to the server, the server calculated and returned everything back and stitched it into the module. I disconnected the module from the flasher and connected it to the car according to the instructions. And nothing. The LED on the module is always red, does not react to anything. I tried to do a reset, according to the instructions, holding the button, connect the power supply and release it when it lights up red, then press and hold until the LED starts blinking, release the button and turn off the power .... nothing blinks, it just lights up red all the time. I tried to reflash the module with a flasher, it reflashed, now there is the 2nd entry out of 8. How to revive the module?

With best regards

looking for correct wiring diagram for evo-all 2010 volkswagen golf wagon (Canada)

Tue, 07 Jan 2025 15:29:58 +0000

Having issues finding a correct evo-all remote start diagram for a 2010 VW golf wagon tried the one diagram with the key under the dash but did not work, do i need the TB-VW module ?

Is the T-harness I received with EVO-VWT1 wired incorrectly?

Sun, 05 Jan 2025 13:27:01 +0000

I installed an EVO-ALL using the EVO-VWT1 kit on a 2015 VW Jetta Push-to-Start. The EVO-ALL does not power up when I plug in the black datalink connector from the T-Harness. It powers and programs just fine on the Flashlink programmer connector. I think the T-harness connector is bad but would appreciate some guidance on how to address this.

Which T-Harness do I need for a Volkswagen Arteon 2019?

Tue, 31 Dec 2024 07:46:37 +0000

There are multiple choices for Volkswagen. Which is the correct harness for my car?

Volkswagen Arteon R-Line tsi 4motion S-A DSG Automatic

Manufacture date: 14 May 2019

Thanks

How long does it take to get past the second step in programming

Sat, 28 Dec 2024 17:19:42 +0000

How come my module all lights simultaneously flash during 2nd step

2019 volkswagen golf R radio stays on

Sat, 21 Dec 2024 18:33:04 +0000

Hi, I installed a evo all standalone in a golf r everything works good only issue I noticed is the radio stays on after the remote times out or if we cancel the remote start , I tried the newest firmware as well as the one on the guide and no changes also tried enabling option d5 lock after start, is there any setting i can enable do to make radio turn off after the remote start shuts down or i have to wire the door pin? only thing that works at the moment is i press lock again and it turns off.

thanks

VW Auto Stop-Start Error

Fri, 20 Dec 2024 11:45:08 +0000

2018 VW Tiguan, AT

Std-Key, Analogue Cluster

THAR-VW6, EVO-ALL FW 64.06

After installation of the THAR-VW6, the car has been giving an Auto Stop-Start Error.

What option should be enabled to allow this option again.

issue with volkswagen golf r 2018

Mon, 09 Dec 2024 19:58:04 +0000

Hi guys, I have issue with install on golf r, I did a evo all stand alone everything was good but sometimes the car starts on the second or third attempt or it doesn't even start any idea what it could be? and also another issue sometimes the hazard light just keep flashing even after the car remote start stops.

thanks

Please confirm which t-harness is required for 2019 Volkswagen Jetta

Mon, 09 Dec 2024 16:16:50 +0000

2019 VW Jetta. Push-to-start

Want to buy Evo-All for remote start using OEM key fob.

Which t-harness don’t need? THAR-VW 1.2.3. Or 6?
Does this require sacrifice of a key?

Can i get by evo bypass key reset resched my vehicles lemit

Sun, 08 Dec 2024 00:29:35 +0000

S/N:001A07304629

solid orange and red light after 1st decryptor

Mon, 02 Dec 2024 12:53:54 +0000

Trying to get my remote start in my 12 Passat TDI working. When I get to the decryptor stage 2 it just has solid orange and red light on when you reinstall and turn on the key, it stops there, just those 2 lights.

its t harness VW_T6 so there isn't really much to hook up, all plug an play except i had to wire in the key reader. car doesn't need the brake pressed, and i didn't wire in the hazzard wire as it was listed as optional. seams like it read the key fine, and the app seemed to program the unit after.

any ideas what i can try, i have all ready hit the flash/decryptor limit. the last thing i was trying was to use the firmware in the instructions instead of the recommended in the app. however i could not do the decryptor step as i hit the limit.

Decryptor limit, Decryptor issue, 2012 Passat tdi

Sat, 30 Nov 2024 18:45:46 +0000

Trying to get my remote start in my 12 Passat TDI working. When I get to the decryptor stage 2 it just has solid orange and red light on when you turn on the key, and stops there, After multiple attempts I am locked out.

Sn 001A07 071025

Is the EVO-VWT6 compatible with a 2016 Volkswagen Passat

Fri, 29 Nov 2024 08:06:26 +0000

Hi looking to get information on automatic car starters

HELP DECRYPTOR HAS REACHED LIMIT FOR THIS CAR

Wed, 27 Nov 2024 17:54:30 +0000

PLEASE RESET FOR MY EVO-ONE MODULE. I THINK I HAVE ISSUE RESOLVED NOW

MODULE S/N 002B04 689431

THANK YOU

VW Jetta 2015 - No Key even after Decrypt seems to have worked fine

Tue, 19 Nov 2024 00:38:29 +0000

When I press the 3 lock sequence, the dash lights up (I had a previous problem that now brought me up to this point) but the dash says 'NO KEY'. The car starts if I get the key in the car, but not if the key is not in the car. I was wondering what could be the problem. The only item that I was wondering is that I reprogrammed (changed options) on the EVO ALL but didn't run the decript after, would this cause this issue? The car is store off site so I will drive in the morning and try this. But what other issues could this be?

Signs of a decryption issue (Bypass) on a VW Jetta 2015

Mon, 18 Nov 2024 12:25:39 +0000

I have installed a EVO ALL on a Jetta 2015 TDI (Push Start - Automatic). I have the EVO ALL, THAR-VW1 and TB-VW installed as per instructions (I decided to skip the trunk release wiring as I didn't find the feature useful for me case). The EVO All is programmed with Diesel Option enabled and it went through the Decryptor without any issues. But when I press the 3 lock sequence. It doesn't start or crank. I see the red light turns on, and then the yellow light turn on... and it repeats this procedure twice (as per the options programmed). The dash of the car doesnt come on (as expected) during the sequence. I will check the brake lights when I have time but I was wondering if there is possibly something wrong with the bypass.

Thanks