Questions & Answers - Recent questions tagged 2008

2008 Honda Odyssey OEM remote does not work after remote start

Sun, 11 Jan 2026 16:56:46 +0000

2008 Honda Odyssey

EVO-ONE SN:002b04712276

Guide #86291

I have installed the unit according to the guide above. It programs fine and the van will remote start. After a remote start the OEM remote will no longer function. I have read in some other posts that this could be caused by incorrect ignition 2 wiring. Currently I have ignition 2 connected to pin D3 should it be connected to D1? What does the "Cut" mean in the wiring diagram for those wires? Same question for the security light connection. Should it be connected to D4 or D6? We just unlock the driver door with the key and everything else works as it should but it would be cool if the OEM remote worked to unlock the doors.

How to program after getting new keys made

Wed, 25 Jun 2025 02:10:37 +0000

I broke my original key remote start was working with that key. Locks smith came out and made me two new keys and now remote start doesn’t work. 2008 Ford F-150 with the “Key Override All” and “FirstTech CM900” how to reprogram what’s in trouble shooter page 16 doesn’t work.

Thinking out loud about this 2008 Focus install

Sat, 30 Dec 2023 14:33:40 +0000

I saw a couple of other manufacturers have a T-Harness that works with the 2008 Focus, but not Fortin's. I also noticed that the FORT1 is compatible with the 2008 Taurus. So I pulled up the install sheets:

https://fortin.ca/download/107381/EVO-ONE_IG_REG_BI_FOR-FOCUS_2008-2009_A_107381.pdf
https://fortin.ca/download/95201/EVO-ALL_IG_RTS_BI_FOR-TAURUS-2008-2010_KEY40bits_A_95201.pdf

The ignition connectors appear to be the same form factor and the same pinouts, but different wire colors. Just wondering if someone could perhaps review this and see if this would change the install options at all? Like using the THAR-FOR1 with the EVO-ONE? Or possibly being able to use the EVO-FORT1 or FORT4?

I do see that the Focus install has a Disarm wire connection that is not present on the others. The other guide for reference is here

Appreciate it!

Remote start needs to be enabled on a 2008 Focus?

Sat, 30 Dec 2023 13:21:04 +0000

Looking into doing an install on a 2008 Focus. Came across this thread:
https://fortin.ca/en/qa/103382/09-focus-remote-start-works-great!-However-the-heater-fan-does-not-run-untill-the-key-is-turned-on./

Wondering if one of the Fortin guys can verify if Forscan is needed or not. Haven't come across this before.

2008 volvo s60

Sat, 21 Oct 2023 13:21:35 +0000

Hi, I have 2008 volvo s60 std key automatic and i want to install evo all. Can you help me to find correct installation manual?

2008 audi A4 standard key 6 speed what kit is needed all in one if possible

Mon, 23 Jan 2023 18:02:38 +0000

can i know what is needed to install a kit to this audi

2008 Toyota Yaris without transponder

Mon, 03 Oct 2022 16:00:57 +0000

Hi guys. As you can see, I am trying to install an EVO ONE with KIT RFK411. I already have all the installation done but I have not been able to carry out the programming since this car does not have a TRANSPONDER. I am using this schematic: evo-one_ig_reg_bi_toy-yaris_2006_wokl_a_104141.pdf

Can you tell me what I should modify in the firmware, what programming should I do and what do I do with the TRANSPONDER connections? Thank you very much in advance.

https://ibb.co/phW8t2P

https://ibb.co/tqhYCdM

https://ibb.co/rfqFyW2

https://ibb.co/jM3xqSf

https://ibb.co/MfkFq51

https://ibb.co/gzd5rTH

https://ibb.co/3rGV5KZ

https://ibb.co/k69KrmV

Why no remote start for 2008 A6

Sat, 24 Sep 2022 15:16:51 +0000

Just curious As to why remote start function is not a available for the 2008 Audi A6. I really do not want to rely on compustar or some other DEI product.

2008 chev express van dash lights stay on after remote start is shut off till door is opened. Evo-all

Sat, 17 Sep 2022 01:35:33 +0000

<p>
Evo-all is hooked up wire to wire to a avital remote start, 4103</p>

i just timed it, when the remote start ends, the dome light comes on, the radio shuts off and the exit illumination activated, about 30 secs later the dome light shuts off, then about a min later the exterior lights shut off. However the dash lights remain on for another nine mins. They time out and turn off then.

20008 honda civic coupe manual transmission

Mon, 02 May 2022 01:57:55 +0000

good day. i want to install evo one on a 2008 honda civic manual transmission.

i can see there is a diagram for automatic transmission but nothing for manual transmission.

my question is do i just add the cluth bypass connection?

is it the thin white wire(a5) or the thick white wire(e1)?

thank you so much.

2008 Honda Odyssey

Wed, 20 Apr 2022 23:28:12 +0000

I have 2008 Honda Odyssey installed the Evo-one & Evo-Start2 with factory fob 3 times lock and App they are work perfect.

i have one problem when use Evostart 2 app open sliding door only left sliding door work ,but right side doesn't work.

If i want both doors to work use the aux output (yellow/black) of the evo one connect to right side sliding door what colour wire of the car. i used guide # 86291 but didn't see it for sliding door wire, can you show me where it locate that wire and diagram?

Thank you very much.

SN:002B04189521

Red light stays on during programming and wont program the keys

Sat, 18 Dec 2021 01:12:17 +0000

I hVE 2008 Ford Escape. I installed the Evo all fort4 with the the t-harness. I have installed all connectors(1,2,3) and connected a relay to the lights as instructed in step 4. I plugged the black connector in while holding the button in and then let it go when the red light came on. I put in each key for 3 seconds each and then pushed the button in. It didn't start the vehicle. Red light stayed on teh whole time. It only blinked when I pushed the button in. What causes this and how can I fix it?

How to wire and programming

Mon, 13 Dec 2021 03:50:23 +0000

After programming my car won't turn over the car turns on but won't click over. When in on/run position led is yellow and not blue. I have a 2008 jeep Patriot I am not using any thing extra no kits no hood pin is there any thing else I need beside the Evo and harness for my vehicle

2008 Ford Expedition driver door pin wire location?

Sun, 07 Nov 2021 13:05:21 +0000

I am trying to locate the driver door pin wire on the driver's side. I even cut a wire I was sure was it, only to find that the door chime still went off when I closed the door. I obviously don't know how to test this correctly

I tried disconnecting the two harnesses that are in the driver kick panel that are smaller, neither of them seemed to have any effect when disconnected them and closed the door, the chime still stopped. So it must be in the large connector with the bolt through it, or somewhere else?

In the guide, its says "see diagram", but I can't find one in there to save my life. I would prefer to stay on the Driver's side since I don't have any wire handy to fish over to the SJB. Of course, at this point, I would take the SJB diagram, but can't find it. Thanks for your help!

Q40 Parking lights turn on intermittently on remote start

Sat, 10 Apr 2021 19:24:24 +0000

I have the EVO-ALL with the T-harness installed on my Infiniti Q40 and G37S Coupe. The options are set identically. On the G37, when I remote start, my parking lights always turn on when I remote start the car. This is not always true on my Q40. More times than not, the parking lights do not come on at all. Option A14 is currently off on both vehicles. I tried turning this option on on the Q40 but there is no change on how (when) it works. The only real difference between the two is the type of RF kit I have installed. Any help will be greatly appreciated.

Edit: Lights come on every time I remote start the car in the garage. Not when I start it outside the garage and it's sunny and bright. Lights switch is set to off for each of the tests.

JEEP patriot 2008 2.4 4*4 Fortin EVO-All +CHRT5 error p0513 in memory

Tue, 15 Dec 2020 05:19:57 +0000

Good day!
JEEP Patriot 2008 2.4 connected Fortin EVO-ALL via CHRT5.
Everything works as it should, the only moment that confuses and I want to solve this problem is that it gives error p0513 in the memory of the car. This happens when, after autostart, insert the key into the ignition switch, turn it to the "on" position and press the brake pedal. It turns out that when the control is transferred to the standard immobilizer in the key, the signal is lost and gives an error, but does not light the lamp.
The key is programmed.
After updating the firmware of the unit, I reset it to factory settings. It seems that I did everything according to the instructions.
What could it be?
Sorry for my english-gogl translation.

Can i add motion and shock sensor at the same time to the evo-one?

Fri, 27 Nov 2020 17:00:48 +0000

I want to add a proximity sensor with the shock sensor

Blue LED goes out during bypass programming

Sun, 08 Nov 2020 15:47:33 +0000

2008 Hyundai Sonata Evo-One doesn't have PATS wire so I didn't use red connector and light blue wires from 20 pin connector. I finished all the wiring and checked it million times. When I press programming button and plug the 6 pin connector, let go on blue, connect 20 pin, antenna, valet, and can bus, put the key turn to on position LEDs go out.

I tried turning on option 20.2 but when I plug the 6 pin connector all lights flash then they go out and nothing. I'm I missing something?

EDIT: Turned out my antenna was faulty, everything works great now.

2008 infiniti g37s coupe push start automatic transmission from us in miles

Sat, 07 Nov 2020 01:25:52 +0000

Hi guys

I got the Fortin Evo-NIST1 with T-Harness and followed guide 80851 for auto transmission.

I got all the wires mentioned connected. Brown wire from t harness to red wire by driver kick panel and the whiteblk to push start brown wire, at the bcm I got the two wires in the pin and tapped the 2nd wire which is red for me in the bcm. The bcm pin wire for (-) door pin is red color wire for me. The programming went smooth but The car doesn't start. When diagnosting I touch the dkblue wire to ground the break lights up and the module has red light. Three times lock the module blinks blue and that's all.

Three times lock button module blinks blue everytime but the car does not start. The module does not have any lights after the blue blinks.

Please help.

Honda Civic 2008 manual transmission I want to install an Evo one de do you recommend thanks

Fri, 06 Nov 2020 10:02:16 +0000

Tengo una transmisión manual Honda Civic 2008 Quiero instalar una Evo que guía de instalación me recomiendan gracias

2008 Pontiac G5 Factory with Fortin

Sat, 31 Oct 2020 10:00:31 +0000

I have a 2008 Pontiac G5 it originally came with a factory remote start however it stopped working a year ago. I was wondering if I can install a fortin all in one? Thanks

How do I enable/configure trunk release using the linkr-lt2 with evo-one unit?

Sun, 25 Oct 2020 12:58:47 +0000

Can't configure trunk release on the linkr-2

08 Nissan Pathfinder - RF642W Lock Button Locks, Unlock Button Locks, Programming Settings or Wrong Wire?

Fri, 13 Dec 2019 16:25:41 +0000

2008 Nissan Pathfinder S - Standard Key - OEM Alarm

Fortin EVO-ONE With NIS2 Harness

Guide Followed: 75611

Unit was flashed to recommended/newest firmware prior to install.

Service No: 002B07 200206

Everything is installed and working (As far as the Remote Starter Goes). When using the OEM Remotes the vehicle will lock and unlock as it always has. However, when using the RF642W remotes, The remote start works flawlessly (Push button, parking lights on, start/Crank, Run) The lock button locks the doors, but the unlock button also locks them (and does not unlock). The OEM Remote will unlock the door as normal with the remote starter running, but I would really like to not have to carry two remotes with me.

Vehicle Running

Oem Remote: Only Solid Yellow is on, No Blue Flashes

RF642W: Lock - Solid Yellow, Blue Flash - Locks Doors
RF642W: Unlock - Solid Yellow, Blue Flash - Locks Doors

Did I miss a step? Enable/disable a wrong option?

Any help is greatly appreciated. Thank You in advance.

can i connect Brwn/White (Parking Light) wire from EvoAll to my Parking light relay.

Wed, 20 Nov 2019 17:24:49 +0000

Can I connect the Br/White wire from EvoAll to my Parking Light relay instaed of the Pink/Red of my Dakota?

2008 Ford Mustang. Can I use obd pins 6 and 14 for CAN bus instead of 3 and 11?

Wed, 13 Nov 2019 22:34:53 +0000

Just wondering if I can use OBD2 pins 6 and 14 for CAN bus comms with my EVO-All on my 2008 Ford Mustang. Not sure pins 3 and 11 as stated in guide are communicating properly. No door lock/unlock etc.

EVO ALL Unlock/Lock Output

Wed, 30 Oct 2019 15:41:59 +0000

How do I get the EVO ALL to have lock/unlock outputs like on this guide https://cdn02.fortin.ca/download/75151/evo-all_ig_tsa_bi_nis1-m35-m37-m56-q70_pts_a_75151.pdf

I am trying to do this on a 2008 Chevy Silverado without factory lock/unlock and the 642W rf Kit

Remote start refuses to start after 3 attempts, no accessory or ignition. Evo All 2008 Subaru Impreza manual.

Sun, 25 Aug 2019 12:13:42 +0000

I installed and programmed this module correctly with an encore remote starter almost a year ago and it was working fine. Recently, my car would not remote start after 3 attempts were made and refused by the remote starter. The clutch is correctly bypassed, I've triple checked the wiring and made sure I have good grounds. I did notice that the positive input coming from the remote start to the Evo all is at 10.5v while the positives to the remote starter are all 12.5+ The yellow LED comes on with ignition and there is NO red LED. I tried a different source for the 12V+ that was a known good constant with no good results. The RS still refuses to start after 3 attempts with the key in either acc or run positions. During the attempts, the dash faintly lights on and off each time. Accessory does not come on with any of the attempts. I've exhausted all other resources that I have available to me, and any help would be greatly appreciated. Thank you! Edit: I forgot to mention that after unplugging and plugging back in the module that my Check Engine light has come on, related to Camshaft Position Sensor.

lock/unlock wire in Evo all schematic GUIDE # 8431

Thu, 22 Aug 2019 16:05:32 +0000

I'm installing the Evo all in my 2008 lexus es350 but the schematic diagram is not clear for A2 and A3 wires (lock and unlock) it only shows arrows but it doesn't show where to connect them? what features these two connections add to the remote starter? Im using the module for 3x lock botton start for now but I'd like to add a RF kit later to the module later on. Thanks

Evo-one install on infiniti 2008 G37 6 speed manual but only lock and unlock work. Remote start does not work.

Wed, 13 Mar 2019 19:00:04 +0000

Hi, I’m installing EVO-one with Omega LINKR-TL2 on a 2008 Infiniti G37 6 speed push to start. I follow the installing guide #33251. I flashed the unit up to the latest firmware. Previously I had a DEI XL202 romote start that connected to EVO one. Tested the unit and only lock and unlock working but when attempt to remote start the car. Only see 3 parking light flash. So I though that it could be DEI XL202 is not functioning correctly so replace it with Omega LINKR-TL2 unit but still have the same result. I have been talking to Derek for his assistant and suggested to master reset both the bypass and remote start. Reset the module and reprogram with his suggested selection (BYPASS SIDE: A1-A11 -ON, C1 -ON, REMOTE SIDE: 8.2, 32.2, 33.3 AND 38.2) but have the same result. I’ve been doing a lot of online researching for the passed 2 week but still no luck. (Now only lock and unlock working) Your help will be much appreciated.

EVO-CHRT5 For Jeep Patriot 2008 I have factory fob, do I have to buy a separate remote starter or RFkit to make it work?

Tue, 22 Jan 2019 06:56:02 +0000

Hello all pro! Hi there, I bought EVO-CHRT5 (T-harness Included) for my Jeep Patriot 2008, my question is, do I have to buy a separate remote starter to be able to make it work? Im looking at the T-harness stand alone installation ( connection ) would this be the right connection for my Jeep? Yes my Jeep has a factory remote fob, but my problem looking at the stand alone wiring diagram is that one connector belong from T-harness ( black, 4 pin w/black and red blue white ) went to RF kit remote starter. do i have to buy this RF kit? can i just go along without making up this RF kit connection? And lastly the A2 and A3 from 20 pin EVO module which is the lock/unlock and the A13 start/stop, I bleieve this is an input which supposed to be connected from the vehicle lock/unlock door out put. but the A13 start/stop of 20 pin EVO ALL module where would this be connected from the vehicle? Also Im aware about the update and programming procedure I do have the the flash link updater im gonna be okay with that, Im just really confuse if i do have to buy a separate remote starter or RF kit to make my command start work. I hope someone can enlighten me Thank You so much !

Evo-GM4 won’t remote start engine,

Sun, 20 Jan 2019 12:24:41 +0000

I installed an Evo-GM4 on 2008 Tahoe and the remote start won’t work, the 3X Lock option is on and also used the decriptor to finish the install and does not work, every time I press lock the blue light comes ON on the module but the engine does not start, it came with Evo all module and T harness

2008 Subaru Impreza Evo All + Encore E1 not working

Mon, 14 Jan 2019 10:48:12 +0000

Encore E1 "Tries" 4 times, yellow LED on Evo lights each try. There is no 12v on any of the ignition outputs when the E1 is trying. The Evo firmware is up to date, and the key data was successfully decrypted. Manual transmission, clutch is switched.

2008 toyota prius remote start

Sat, 29 Dec 2018 12:07:19 +0000

Hello. I am installing now Key Override All on 2008 Prius. It is programmed well, but do not start the car. When I connect the GWR and ON (-) wires, the red LED turns on, but the pts button does not work. What to do? If I try the second module, does its limit fail? In 2014, I installed the key override all on 2006 Prius without problems.

Dodge Dakota 2008 doesn't Start** CHR5

Thu, 20 Dec 2018 20:30:15 +0000

EVO-All.....reprogrammed Evo-All with Flash Updater....Went smoothly....C1 and D1 enanled along with 3x Lock....Connected Yellow fromT-Harness with yellow wire of 20 pin connector...Mauve wire from T-Harness to green-red wire of 20 pin connector....Programming in truck went smoothly...After flashing Blue Leds, hit Lock on OEM remote got a Beep and flashing Blue leds went off...Tried to 3x Remote start Blue LED went on with each press, but engine did not start....Tried Lock-unlock-Lock but still no response. When started with key , Yellow Led is on!! Master reset and tried again , no response...Each time I attached the T-Harness I had to reset the Clock...What am I doing WRONG?

Correct Options for Evo-One Standalone Remote Start - 2008 Ford Fusion

Tue, 11 Dec 2018 11:07:11 +0000

I have installed an EVO-ONE into a 2008 Ford Fusion. This is NOT a T-harness install, as no T-Harness is available for this model. Connections include Yellow A1 to Pink E5, which in turn is connected to the ignition wire at the key cylinder block; Lt. Blue / Black A10 and Lt. Blue A20 to PATS RX and TX, respectively, at the PATS ring block; Green/White A17 and Green/Red A18 to the respective ends of the LF door trigger pin circuit; Orange E2 to the Accessory wire at the key cylinder block; Yellow E6 to the start wire at the key cylinder block; and E3 and E4 to 12V constant live and ground connections, respectively. Gray/Black C4 is connected to CAN LOW at the OBDII connector, and Gray C3 is connected to CAN HIGH at the OBDII connector. I have double-checked all wiring and confirmed correct connections throughout.

I flashed the EVO-ONE bypass side to Firmware 71.[18], and have set function 31 to option 4. Upon initial post-installation test, I set the LED on the face of the EVO-ONE to "Blue," and got the quick flash when turning the ignition key. Holding the key to the PATS ring and remote-starting the vehicle, it started for a second and then shut off.

I have not had any success in performing the two-key programming procedure. The LED remains red, and I do not get the expected LED changes when inserting the first and second keys as directed.

I'm assuming I have a configuration issue of some sort, and I'm hoping someone can offer some insight. I have loaded the "suggested settings" in Flash Manager and have saved those to the EVO-ONE, but am stuck at getting the vehicle to remain started during the initial test.

Thanks, in advance, for your help!

Evo-One with Volvo c30

Thu, 11 Oct 2018 10:10:21 +0000

Hey,

I have an evo-all installed with DR-1000 remote starter. It was using non-data link connection. 2g on drone mobile was discontinued so they sent me a free DR-3400. I see that drone is not compatible with Evo-all and only evo-one, and the vehicle compatability says EVO-ONE is compatible with Volvo 2008 C30.

Problem is there are no install instructions so I can verify what I have installed will work with an Evo-one. Thinking I can just buy an Evo-one and plug it in where the Evo-All was plugged in, then plug in the DR-3400 over data link and it should work. Am I missing anything? (yes I know the two cables have to be flipped for datalink to work with Evo-one and drone mobile). Origonal install was in 2011.

Evo all will not start vehicle via auto connect unit and will no longaer allow any updayes!

Mon, 10 Sep 2018 20:46:08 +0000

Can not start vehicle via after market starter

2008 Altima PTS

Thu, 15 Feb 2018 19:01:12 +0000

Install evo-all and all wiring complete. After remote starting with oem key 3x lock, car runs about 3 seconds and shuts off. Then it tries to restart itself, ultimately leaving the ignition in the acc position. I Was told to flash a different firmware version of 72.23, still not working. Added rf kit revostart 1.1 same results. Need help please.

Turns over but, won't start

Thu, 28 Dec 2017 21:04:33 +0000

Turns over but, doesn't start using t harness and RF641W. When programing remotes blue led on antenna doesn't stop rapid flash until switch is turned off. is that normal? or should it stop flashing on its own?

Doors locking after ignition shut off - Not programmed to.

Sat, 09 Dec 2017 01:40:19 +0000

2008 Nissan Titan, EVO-ONE with T-Harness install using RF642W remotes. Doors immediately lock upon turng engine off. What function am I missing to disable this? Tried Rico's advice. Alarm doesn't turn off if set off with RF642W remotes. May just diconnect and purchase a different remote start at this point. I'm really getting dissapointed with this installation. Neither contributors really answered the question.

Update:

Customer has asked to have remote start removed and replaced with a different manufacturer.

Can't say I blame him.

2008 dodge avenger remote start

Sun, 29 Oct 2017 18:39:02 +0000

I have a 2008 dodge avenger, bought used. there is a remote start and by pas module. not sure if programmed or not. took console apart and everything if wired but no lights come on, on either unit when car put into on position. on bypass module when wires not connected to it car will not start manual but when wire are in module car manually will start. is there a sequence I need to follow? how to check if everything is install properly? thanks

Can't locate the Lock/Unlock Connection

Mon, 06 Mar 2017 20:48:53 +0000

Installing an Evo-One in a 2008 Acura RDX and can't find the connector for the lock/unlock wires.

The THAR-ONE-HON1 guide says it is a White 34 pin connector.

The Wirecolor wiring photo shows it as a 16 pin connector.

the12volt.com site says its a Blue 23 pin connector.

I can't find any of these.

Starter Over Cranking Evo-One with harness 2008 Infiniti QX56 with intelli-key

Sun, 26 Feb 2017 19:27:06 +0000

when remote starting the starter is over cranking. It is wired to the can bus and programmed to tachless/data link but it still over cranks.

does evo-all fit in 2008 civic SI standard

Wed, 15 Feb 2017 08:17:04 +0000

i have a 2008 honda civic si standard. im wondering if evo-all will work and if i need to update the firmware vr: 4.18,hardware vr: 6

Can't locate Parking light (-) wire on 2008 Acura MDX. Can I use (+) wire instead ?

Fri, 03 Feb 2017 03:50:20 +0000

Hi. I installed EVO-ONE with T-Harness on 2008 Acura MDX. Follwed your instruction and everything works so far. However, I can't find "Parking light (-) wire" on the light switch. I probably have to remove the steering wheel to remove combination switch assembly to find that wire.

Is there any other way to get this to work ? Is there any option on EVO-ONE to switch the polarity of Pink wire on A12 so that I can use "Parking light (+) wire" instead ? ( (+) is near fuse box, much easier to access than removing the steering wheel.)

If not, is it possible to wire an LED and hook up its lead to somewhere in EVO-ONE ? ( I can install one LED on dashboard as an indicator light)

Your help is greatly appreciated.

Thank you.

- James

Why does my alarm come on when i remote start my 2008 honda accord when my doors are locked?

Wed, 04 Jan 2017 19:55:03 +0000

I'm using the crimestopper rs4-g5, with the fortin honda SL3. The car starts fine if the doors are unlocked. The SL3 seems not to be programing right. It flashes but not 10 times then stops. It continues to flash in different patterns.

Yellow light on EVO-FORT1 on solid

Sat, 26 Nov 2016 09:52:32 +0000

Installing EVO-FORT1 on a 2008 Ford Escape. EVO firmware 71.37. Flashlink Manger 3.62. Stand alone installation. Evo programmed correctly but when the red connector is plugged in after the decriptor process was done, ignition turns on and yellow light on EVO is solid. Blue light on EVO flashes with key fob lock and unlock buttons are pressed. C1 and D1 are on as well as F2.

2008 ford fusion,foot brake.

Wed, 21 Sep 2016 08:00:11 +0000

hi

After the car start by the remote,the car won't shut off when i step on the foot-brake without the car'key in the ignition.

Any idea what could be wrong?

Ty .

Suzuki Grand Vitara 2008/11 Smart-Pass with Evo Key fw v1.07

Wed, 31 Aug 2016 18:34:56 +0000

Hello! I've connected the Evo-Key v1.07 as in your cheme, progammed it succesfully (the yellow indicator blinked). But the autostart works only 1 of 3 times. The other 2 times the starter runs, but the engine doesn't start. While starting, both of indicators (red & yellow) constantly glow. Maybe the new firmware will help? Or shorten the length of original wires? Could you send me the correct firmware? Please, help!

2008 F250 remote start

Sun, 20 Dec 2015 17:35:23 +0000

I have a 2008 Ford F250 with a 6.4 diesel i would like to add remote start. When i check on your site it says you do make a compatible system but when i go to Crutchfield to order it tells me the system is not compatable?

If the system is compatable what system and componets will i need to purchase to make this work?