Questions & Answers - Recent questions tagged 2012

Eqinox 2012

Sun, 15 Dec 2024 19:10:35 +0000

I received evo /rs for 2012 Chevy equinox. No instructions can’t seem to get much from your site it lags a lot even with 5g. What can I do?

Right hand drive 2012 Impreza PTS engine started

Fri, 25 Oct 2024 18:58:24 +0000

Imo-data turned out to be a yellow wire in the connector where the starter wire and ON2 are. I connected the light blue wire with a black stripe to the side of the car. And the brown wire next to the yellow one, I cut (it interfered). On the red connector of the evo-one I connected a relay with a pair of contacts and with this relay I opened these yellow and brown wires. After entering the car, it was necessary to press the start-stop button twice.

2012 Audi A7 won't start

Sun, 14 Jan 2024 17:26:49 +0000

2012 Audi A7 using Evo One. The entire setup was successful, I was able to program the remote. After install, lock3x did nothing. Looking through Remote Starter options in flashlink, and "System Control by OEM remote" was disabled by default. Ok. Set to lock3x. Reinstalled, now pressing the button turns the ignition on, but does not start vehicle. It does its starting attempt, then turns off and relocks itself. What am I missing here? I'm sure there are other options that I need to change that were not shown in the instructions. Any help would be great.

2012 Ford Explorer EVO-ALL The engine won't start.

Fri, 27 Oct 2023 21:33:14 +0000

I installed EVO-ALL on a 2012 Ford Explorer.

The wiring diagram is on page 3 of #94851 (WIRING CONNECTION) and I have completed the wiring and key programming.

When I press the lock button on the key 3 times the ignition turns on but the engine does not start.Nor does the cell.The cell won't turn either.

SN:001A07465529

FIRMWARE VERSION 71.52

best regards

2012 cls class

Fri, 25 Aug 2023 13:27:52 +0000

Hello. Is there an option for remote start 2012 mercedes CLS class(tip start)?

2012 tundra g key evo one rfk942 stopped working

Tue, 15 Aug 2023 12:16:14 +0000

2012 tundra. Been in service for a year with evo one and rfk942 kit. Suddenly stopped remote starting. no parking light flashes. locks and unlocks. blue led flashes on evoall. when remote starting, red led comes on, then yellow. instrument cluster illuminates. half second later red turns off. one second later yellow turns off. No parking light flashes. no reattempts.

new brake switch was installed just as a precautionary. hood switch was bypassed as a precautionary.

verified firmware and options are still in module.

any ideas?

2012 audi a7 evo programing successing but car wont romove start

Thu, 05 Jan 2023 15:08:06 +0000

instation and programing done succesing but when try start car pushing button 3 times whit oem key the blue led flashing when pushe lock button and noting happend

EVO One 2018 manufacture date 2012 4Runner G-Key

Fri, 09 Dec 2022 21:41:59 +0000

Just looked at the latest install guide for 4runner. Says unit compatible module 2019 and above with firmware 79.59. I have 2018 module but can't get firmware 79.59. Do I need 2019 module to receive firmware or use on 2012 4runner?

VW Tiguan 2012 not pass key bypass programing.

Fri, 21 Oct 2022 13:02:15 +0000

2012 VW Tiguan, I installing EVO-ALL, used THAR-VW2 diagram, I start with prograning procedure, 1-6 pass,

in stage 7 red light tree times flashing,I reconect wires on OBDII, now it flash twice.

this problem in wiring or programing? thanks.

2012 audi a7 programming issue

Wed, 19 Oct 2022 12:46:33 +0000

I just installed the Evo One in my wifes car.. I go thru the entire process with programing and i get up to the parts where the ignition cycles on and off.. The led lights are supposed to alternate from yellow to red when its completed.. Mine on flashes red.. Do i wire something incorrect??

Also when i go to Decrypt the IMMO it wont do it..

4x Lock Required to start Audi 2012 S4 with EVO-ALL+THAR-AUD1

Tue, 15 Mar 2022 15:14:03 +0000

2012 Audi S4 with Push button start, automatic trans, Installed EVO-ALL+THAR AUD1. (latest firmware confirmed with flashlink)

If the canbus is alive, the car will start on 3x lock of oem fob.

If the car is asleep, as in it sits overnight then "4x" lock is required to start the engine.

Something I've also noticed is 3x lock does not stop the engine when it has been started by the EVO-ALL module..so if engine is started with fortin module, no amount of fob lock button pressed will not stop the engine.

The system was updated with flashlink during the install process and only setting changed was the start run time length from 5mins to 30mins.

All the wiring that is required with the THAR-AUD1 has ben double checked and as mentioend, if canbus is live it'll start perfectly fine on 3x lock, it's just when the vehcle is asleep it's like you need to press the remote 1x to wake up the canbus and then 3x to start the engine.

The 3x lock to shut off engine after start with fortin system, I'm not sure if this is possible or correct so I'm not 100% this is a concern.

Is any of the above normal operation?

Installed Evo-One on 2012 Camry G-key with THAR-ONE-TOY4 look-unlook works, cranks but dont start

Sun, 12 Dec 2021 13:58:11 +0000

Car cranks but wont start, if I started with the key then remote started it takes over need help

EVO-ONE key bypass programming issue - Honda Civic 2012

Mon, 22 Nov 2021 17:24:07 +0000

I am trying to setup key bypass programming on 2012 Honda Civic using EVO-One using T-harness.

I am only able to go up to step 4 where the red-light is flashing once and pause. but when I goto step 5 and turn the ignition on all the lights go off. I tried reflshing the unit and still same issue.

can someone help me?

bypass key programing

Tue, 19 Oct 2021 22:06:10 +0000

i have a 2012 nissan versa without intelegent key im using t harness. i plugged in all plugs and connected flash link updated module. now i was KEY BYPASS PROGRAMMING PROCEDURE . i did firs 2 steps now when i go to turn on key the yellow led is solid and red does not turn on. please help also i have not connected any lock unlock wires and driver door pin or the hood pin aswell as the parking light wire.

romete key connot progrsming after press 4x the brake or use valet switch and presshols engine will start

Sun, 10 Oct 2021 13:10:33 +0000

kia 2012 maunal standard key

2012 titan conncections

Mon, 30 Aug 2021 14:12:28 +0000

intall question for 2012 nissan titan SV (standard key)with factory alarm.

evo-all SN#001A07 215887 with crimestopper Sp402 remote starter.

1)will i need to connect wire for the Auto Lights shut down?which wires i need from Evo-All

2)do i need to connect Security Led wire?which wire i need from Evo-All?

3)also how do i connect all 4 doors for the door trigger?

Also if i were to use Evo-All for stand alone can i use crimstopper rf remote and antenna?thanks

2012 ford fusion Module won't program

Mon, 25 Jan 2021 18:13:22 +0000

I just installed evo all for1 on a 2012 ford fusion . Connected can high/ can low, immobilizer, and ignition t harness. Flashed module, followed the program instructions and can't get it to program.

my update for a 2012 dodge ram shows a 2015 caravan update, why ?

Thu, 07 Jan 2021 13:59:37 +0000

I purchaed a flashlink update modual and a evo-chrt4 for a 2012 dodge ram. When I went to do a firmware update it came up as a 2015 dodge caravan. How do I update the firmware for my vehicle ?

what is the diffrence between 2012 chevy 1500 standard key vs premium?

Fri, 18 Dec 2020 19:20:17 +0000

when selecting options for 2012 chevy silverado 1500 it has standard key or premium, what determines the premium option?

2012 Fusion Hybrid Evo All Thar-For1- Alarms and will not start

Tue, 24 Nov 2020 13:13:38 +0000

The Alarm went off the 1st 3 times I started the vehicle with the RS. Standalone OEM Remote Standard key. Vehicle is fine but RS will not even try to start the car. Tried Reflash and toggling A5 to no avail. Are the diodes essential for this install? This unit came prewired/ preprogrammed and had the Alarm/ unlock wires cut and taped into the T harness. Seems to be a question in other areas if the 2010- 2012 Hybrid is compatible?

What kind of rf remote can I use with the evo all

Wed, 17 Jun 2020 08:00:49 +0000

Remote control

2012 soul standard key no can bus communication evo one

Mon, 18 May 2020 08:43:08 +0000

2012 Kia Soul standard key no immobilizer. Using thar-one-khy1. Blue light won't flash when programming. I can read codes and voltage to the fortin module white 5 pin matches obd output at around 2.37v low can and 2.67v high. Module,flashlink all at the latest firmware. Evo one flashes successfully. Just when key on it fails to finish programming. Also wired in the fortin hood switch. Any help? Since it's such a simple install it's embarrassing to ask for help. Should work and great instructions as usual.

EVO-ALL THAR-NIS1 2012 Infiniti M56X 3x oem, brake lights but no start?

Tue, 07 Jan 2020 12:19:17 +0000

Can anyone help with this? Updated the evo-all with flashlink, installed harness. Was told by seller that I needed only splice extra wires into door trigger wire and one wire on the push to start button which I did.

Followed the programming sequence, took unit out, ran DCryptor which reported back success. Installed unit back in the car , closed doors, press 3x lock an no start. The brake lights come on but the car never turns over. What could be wrong? I keep seeing people saying they tweaked some settings, I don't recall seeing any special settings that I needed to tweak.

Thank you in advance.

can the evo-one be used as a remote starter in a 2012 ram with manual transmission?

Thu, 26 Dec 2019 19:45:29 +0000

can an evo-one be used for a 2012 ram with manual transmission using 3x lock without using a remote start as well?

why is a sacrifice key required for 2012-2015 vw standard key installation?

Wed, 18 Dec 2019 11:03:47 +0000

im looking to install the evo-one system with the THAR-vw3 and its showing a sacrifice key wraped to complete the installation... im confused as to what the function is, as i thought the modual would learn and act as a transponder for the key. is there a way around this with a more direct fit system?

Car Won't start

Sun, 07 Apr 2019 15:21:12 +0000

Dash lights come but car won't start EVO red light comes on

dodge journey 2012 all programing its ok but dont crank

Fri, 05 Apr 2019 21:31:21 +0000

installed and programmed as indiaca the user manual at the time of pressing the lock button three times only turn on the parking lights and in the module the red led is lit in the same way, please your help to solve this problem,

Will factory remote, remote start a 2012 toyota venza with G key

Fri, 05 Apr 2019 13:07:30 +0000

Im looking to buy a remote starter with tharness, what will i need to conplete instalation?

2012 sprinter remote start

Wed, 13 Mar 2019 13:06:19 +0000

Hello. I want to install evo-all on 2012 Mercedes Sprinter (WD3PE8CCXC5652808). But in the list flashlink manager it is not. Can I flash dodge sprinter?

Installed Evo-one 2012 toyota rav4 remote works but disables 4x4 and traction control

Sat, 02 Feb 2019 16:41:30 +0000

Programmed and installed Evo-one on 2012 Tiyta Rav4 G key. The remote starts and runs fine with hitting lock on oem fob 3x. The problem is while the remote is hooked up it disables my 4x4, traction control , and cruise. I installed all updates prior to programming the module. Inserting the key in the ignition and proceeding to normal driving still has those features disabled. I unhook the remote and all is normal.

Remote push start evo all for Nissan GTR, all programmed correctly but won’t start. Break lights shows but no start?

Thu, 31 Jan 2019 23:13:17 +0000

Installed the Evo All in a 2012 Nissan GTR, everything pulgged up correctly on the instructions. Programmed key fob as it shown, went smoothly with every step. Once finished and time to start the car with the oem key fob with the 3x lock button it will not start but only the break light works? How come it did not start up?

Compustar Prime G15 RF-1WG15-AM compatible with EVO All

Wed, 30 Jan 2019 23:08:26 +0000

Purchased the EVO-GM1 for my 2012 Chevrolet Cruze. Want to install it in standalone but need to purchase an RF Kit since my factory FOB want function after car is started. Looking at picking up the Compustar Prime G15 FR-1WG15-AM RF Kit. Can't anthing on the internet to figure out if this is compatible with the EVO-GM1. Thanks

Do I need anything else other than the EVO-ONE to remote start a 2012 Hyundai Veracruz (US) Standard key?

Thu, 10 Jan 2019 17:53:23 +0000

I have just installed the EVO-ONE into a 2012 Hyundai Veracruz (US) standard key. I saw that there is an option to remote start with the 3X OEM key. This is not working. IS there something that needs to be changed in the parameters, or a RF kit that needs to be installed to enable this feature?

2012 Ford Fusion Hybrid Compatibility

Fri, 14 Dec 2018 13:07:53 +0000

I've purchased an Evo about a year ago, installed everything and could never get it to work. It would set off the alarm instead of starting. Unfortunately, I had to return it. I would like to try again but I cannot get a clear answer. Is the system even compatible with a 2012 Ford Fusion Hybrid? There is no mention of the Hybrid on the site, just the standard. I would like to get a clear answer and purchase it again if I find out it should for sure work.

2012 Ford Fusion won't remote Start

Tue, 11 Dec 2018 09:13:20 +0000

I have completed the EVO programming with the dcryptor and it says it successfully programs. When I plug the EVO back into the vehicle and prss the lock button x3 it will not start the vehicle. I can see on the EVO the lights flash when I hit the lock buttons, but that is all it does. I have the options set in the module for 3x lock to start it. Any thoughts on how to get this to remote start my 2012 Fusion.

2012 Ford Fusion SEL Question

Thu, 06 Dec 2018 15:50:44 +0000

I am programming the Fortin EVO-ALL and using the Flashk link dcryptor because I only have a single key. When I get to the last step where I am to wait for the flashing blue lights to turn off the key, my unit flashes blue rapidly and then alternates red/ yellow with the key still on befor I turn off the key. I took the EVO back in to the flash link and plugged it in to run the dcryptor. Tried the dcryptor both Monday and Tuesday. It ran for over an hour and never completed the decription process. What could be wrong?

2012 ram 3500 diesel wont start

Thu, 15 Nov 2018 13:00:02 +0000

After install and programming unit, truck wont start. Blue led flashes when lock button is pressed. No red led when dark blue wire is grounded. Yellow led when key is in the ignition and truck is running.

2012 Subaru Forester Manual Trans. Evo-One OEM key fob

Mon, 22 Oct 2018 05:55:37 +0000

2012 Subaru Forester Manual Trans. Evo-One OEM key fob.
setup according to #54711 guide, except hood pin is not used.
Flashed to 79.49 & 1.24 ran the decrypter, then set the standard settings in both tabs. 83.2 C1 & D5 enabled
When I press the lock 3x times the horn beeps, the parking lights flash 3 times the radio & Dash lights flash. but it does not start. In reading the help guide, it says the EVO-One red light should turn on, it does not.
Any help would be much appreciated.

When I try to remote start im just getting flashing red light

Sun, 02 Sep 2018 10:11:47 +0000

I tried troubleshooting it and when trying to remote start yellow and red connectors are not receiving power

question on lock/arm and unlock/disarm wiring

Tue, 06 Feb 2018 23:42:19 +0000

Can you clarify in the wiring schematic for lock/arm and unlock/disarm wires inside the door panel of 2012 QX56 (reference guide #33191). From reading the schematic, I'm assuming I cut the Lock/Arm wire inside the door panel and then tie the cut wire to the A2/A5 wires. I would then do the same for Unlock/Disarm wire inside the door and tie to the A3/A4 wires. The question is what side of the cut wire(s) do I tie the wires coming from the T-harness ?

How long should the delay be for diesel mode?

Thu, 04 Jan 2018 18:49:04 +0000

How long should the delay be when operating in Diesel mode? My unit only gives about an 8-10 second delay which is not enough time for the grid heater in cold weather. Wondering if a master reset or software update would fix this or if that is as long as the delay is? Others I have talked to with this unit reported longer delays. Thank you for any help.Truck is 2012 Ram 3500 Cummins Diesel

Ram 2500 2012 diesel , EVO-ALL 3x lock remote start with T-harness

Sat, 30 Dec 2017 18:45:57 +0000

hello ,

in the installation guides , the Brow/White of the evo-all connect for parking light (-) , do i need to connect the Brow/White to the parking lights wire? can i just leave it unconnect?

Rf kit for evo one

Thu, 21 Dec 2017 09:02:11 +0000

Can I use A AST atom as a RF kit for a evo one?

Are there any known security vulnerabilities with the Evo-One and the 2012 Nissan Xterra?

Thu, 14 Dec 2017 15:16:38 +0000

I installed an EVO-One in a friend's 2012 Nissan Xterra, and he recently had it broken into twice. He was also able to use his keyfob to get into another Xterra by accident. He thought it was his, and without paying attention, he unlocked it and sat in it before realizing it wasn't. The horn chirp when locking also stopped working. It also does not sound the panic when broken into or triggered.

2012 F150 Parking light wire location and colour and connector pls .

Thu, 09 Nov 2017 23:46:50 +0000

I cant find the wire for parking light for 2012 F150 xlt 5L engine 4*4 . I cant find the connector on pass kik panel

EVO-ONE + Scion iq w/o immobilizer

Sun, 29 Oct 2017 23:56:29 +0000

I got an EVO-ONE with a T-harness but can't get it to program correctly. I just keep getting a red light. Tech support says maybe can't program because there's no immobilizer. Anyone know if I can still install this thing and how.

2012 Tundra will not start, just continuously cranks over

Mon, 26 Jun 2017 23:11:15 +0000

So I purchased a pre flashed EVO One with Toyota 2 harness and RFTX64-2W remotes, for my 2012 Tundra. I hooked up all the listed wires in the install, which I verified multiple times per your diagram. All my connections are soldered and covered using shrink wrap tubes. I have read through all your Q&As and still have had no luck with the remote start. After the Tundra continuously cranks over, the parking lights flash 4 times. Please help.

Is it possible to extend the start delay?

Thu, 27 Apr 2017 16:54:19 +0000

I have an EVO-CHRT4 installed in a 2012 Dodge Ram 3500 Diesel. On cold mornings the 15 second delay start isnt always long enough to allow the grid heater lights to turn off. Is there any way to extend the delay start?

Connected parking light wire and they do not turn on.

Thu, 20 Apr 2017 19:30:53 +0000

Hello,

I bought the EVO-ALL with THAR-NIS1 for my Nissan Juke 2012 ( PTS ) I was able to get every other connection working except the parking lights. I plugged the brown wire from the harness to the purple wire shown in the Wire-Color pictures and even confirmed that it is the correct wire because I get a constant 12v when I turn on the parking lights and probe that wire. Is there something I am missing that would cause the lights not to turn on?

Thanks.

2012 ALTIMA WILL NOT START

Wed, 29 Mar 2017 13:36:55 +0000

Hi, I just installed EVO-NIST1 as per Installation Guide in my Nissan Altima 2012 (Push to Start - Auto transmission) for using my OEM Key Fob 3x to Remote Start , I plugged in all connectors and spliced 2 wires, the first one is the black/white from the EVO to the brown wire at the push button, the second wire is the parking light wire, it's the brown wire from the EVO going to the red/blue wire in the fuse box. I programmed the EVO and all lights appeared as expected, however, the car doesn't start remotely, i tried it with the key inside and still no luck, whenever i push the remote lock key i see a blue light on the EVO , the brake lights is off when trying to remote start , I plug the RL 1 to EVO , please tell me what I’m missing here

Firmware Vr.72-19