Questions & Answers - Recent questions tagged 2015

sienna 2015 starts for 3-5 seconds and turns off. using t harness from MPC and RF442

Sat, 13 Dec 2025 03:05:40 +0000

Sienna shuts off in 3-5 seconds, using a T-harness and RF442 kit. I only did a plug and play no splicing of any wires and flashed using the flashlink 4. Second issue, My RF keys start and remote start both my lexus and sienna, installed back to back and somehow they pick up on both signals. Need help, do not know where to start.

What is the bare minimum that has to be connected for the EVO-ALL to work on a 2015 Ford Focus

Tue, 23 Sep 2025 00:31:02 +0000

If I hook up can- and can+ and pins A1, A10, A16, and A20 will the remote start function properly?

SN #001A07 696223

2015 subaru

Mon, 22 Sep 2025 17:40:45 +0000

Hello. I installed the Evo-One on a 2015 Subaru XV-KROSSTREK. The owner said the original smart key wasn't working properly, so they made a new one. Since then, the remote start hasn't worked. I've had a problem... I've reprogrammed the module three times, but it still doesn't work. After pressing it three times, it seems to start working... the red LED lights up and then immediately goes out. I tried a different module, and it worked. 002B04692128

Will Evo One all-in-one remote start work on 2015 Mazda CX-9 with turn knob to start?

Sat, 13 Sep 2025 23:19:22 +0000

Hi, Will Evo One all-in-one remote start work on 2015 Mazda CX-9 with turn knob to start? My 2015 Mazda CX-9 does not need to insert key to start or stop, it has turn knob to start. is this consider stander key? how can i do KEY BYPASS PROGRAMMING PROCEDURE for my 2 key fobs, since it does not need to insert key? Looks like only stander installation is available.

Install of evo-Audt1 into my 2015 Q5

Tue, 17 Jun 2025 05:25:59 +0000

Hello,

I need to speak with someone regarding the installation of an evo-all system into my 2015 Audi Q5.

I am an automotive Technician and am currently trying to install the Evo-Audt1 into my vehicle.

I chose this kit, due to the simplicity of the t harness and not wanting to tap into many wires behind the key port.

Prior to purchase, I compared OEM and Fortin diagrams, and found very minor differences, but none with the T harnesss/key port plug side of things.

Looking at OE wiring diagrams. There seems to be no differences between the 2014 and 2015 Audi Q5 as far as the anti theft/key wiring goes.

I wanted to know on yalls end what the difference might be as to why I am unable to use the T harness to complete my installation.

I’ve tried using programming for a 2015 with the correct options, as well as a 2014. To no avail, although, the 2014 option seemed to work best, just was unable to decrypt the key when I got to that step, as expected.

When I do the 2014 programming procedure ( guide 77151 ), i get to step 8, which then the module flashes red rather than alternating red to yellow.

I’m really Looking for a technical description as to why this is the case, what is different, and what I could do with what I have installed into the vehicle ( evo-audt1 ).

Thanks.

2015 Audi Q5 Prestige, 3.0T Key port w/ push to start.

2015 LS460

Tue, 24 Dec 2024 11:47:30 +0000

Where can I find a factory remote start module?

2015 LS460

Tue, 24 Dec 2024 10:19:13 +0000

Hello. I installed evo-one on 2015 LS460. 002B04697112...When we want to start, the ignition turns on instantly and turns off. What to do?

001A06503255

Fri, 01 Nov 2024 07:50:29 +0000

001A06503255 doesn't work

Right hand drive 2012 Impreza PTS engine started

Fri, 25 Oct 2024 18:58:24 +0000

Imo-data turned out to be a yellow wire in the connector where the starter wire and ON2 are. I connected the light blue wire with a black stripe to the side of the car. And the brown wire next to the yellow one, I cut (it interfered). On the red connector of the evo-one I connected a relay with a pair of contacts and with this relay I opened these yellow and brown wires. After entering the car, it was necessary to press the start-stop button twice.

2015 impreza

Fri, 25 Oct 2024 13:15:39 +0000

The car is Japanese, right-hand drive. I installed the evo-one and it worked, but after a while it stopped working. The engine will start and shut off shortly. The immobilizer LED flashes on the panel...

2015 impreza

Fri, 25 Oct 2024 12:20:01 +0000

Hello. I installed Evo-One on a 2015 Impreza. Does the Evo-One have an input line to lock and unlock the doors? If I put another remote.

2015 Silverado work truck with no fobs. Can i add a remote start with fortin remotes?

Sun, 05 May 2024 15:50:25 +0000

Ive installed 2 fortin systems before.

2015 outlander euro

Fri, 03 May 2024 10:58:39 +0000

Hello. I also tried the master reset as you told me. I tried another device, which I tried on Ford before (001A07391859), but "take over" is not possible... it says on the monitor that the immobilizer system needs service.

2015 Dodge Charger will not remote start

Sat, 18 Nov 2023 05:27:05 +0000

Hello. Referring to this guide I have set up my EVO-ALL

Here is what I have done:
- Flashed the unit with the latest firmware
- Selected my vehicle in the flashlink software
- Connected the T harness and ignition wires

When programming:
- Let go of programming button on BLUE
- Press programming button once to turn off BLUE
- Turn ignition to RUN
Now the BLUE led starts flashing. According to the guide, the RED led should also be flashing, which it is not. That leads me to believe that CAN2 is not being detected, is that correct? How do I fix this issue?

2015 Yaris

Sun, 11 Jun 2023 08:11:17 +0000

On 2015 Toyota Yaris (Hybrid) can I put evo-one (standalone)?

when the engine stops, the focus 2015 radio does not turn off

Tue, 07 Feb 2023 12:34:03 +0000

good afternoon. installed evo all. remote startup is working. I set it for 15 minutes, at the end the engine stops, the dashboard goes out, but the radio does not go out. help please

2015 HIGHLANDER CHECK SMART KEY SYSTEM LIGHT

Sun, 04 Dec 2022 20:45:15 +0000

Hello community. Dereck here I am again needing your help, the installation was perfect, the programming was perfect but I'm getting the warning for check smart key system. I've changed battery's in the keys. It is Push to start. I am trying to install an evo all. Thank you very much in advance.

2015 Honda Accord push to start cranks and will not start. Installed remote start.

Tue, 08 Feb 2022 18:37:46 +0000

Module set up

Dash lights on even though the evo one with telematic works fine

Wed, 22 Dec 2021 00:42:27 +0000

Hi I have a 2015 Honda accord (push to start) I'm using the evo one with the telematic system it works good with the app. But no matter what I do I get the same dash lights including brake, the vehicles lane warning, traction control and ect.

Suzuki swift sport 2015 europe

Mon, 13 Dec 2021 16:55:50 +0000

Bonjour, le démarrage à distance est il compatible avec la swift sport 2015 avec bouton de démarrage ?
quel est le module qu'il faut ?
merci

EVO-ALL THAR-NIS1 Nissan Sentra 2015 Push-To-Start doesn't start

Sun, 28 Nov 2021 18:34:20 +0000

The steps I followed:

- Plugged the 4 pin back of push to start button

- Plugged the 4 pin break pedal

- Plugged the 16 pin OBDII

After plugging those connectors I went with the key bypass programming procedure.

Pushing the lock key 3 times makes the module send commands to the car, but no success turning it on. And then the red light flashes a few times (if I'm not mistaking it's 3 times).

I did not connect those 5 other wires into the BCM, Driver kick panel or Push-To-Start Button because I thought that only connecting the plugs would be enough to get the vehicle started. Is this assumption right or I should connect all those other 5 wires to get the car started?

The following file is the installation guide so you guys can take a look and help me on it:

https://fortin.ca/download/74261/evo-all_ig_tsa_bi_nis1-sentra_pts_2013-2018_a_74261.pdf

How to set EVO ONE RFK942 on Honda CRV 2015 SE ?

Sun, 28 Nov 2021 10:13:33 +0000

Evo One with T-harness-HON3 has been installed on a Honda CRV 2015 SE automatic push to start.

The module has been flashed using the wizard: Honda CRV 2015 automatic,, push-to-start, has OEM alarm, Remote Starter only, RFK942 kit, T-HARNESS-HON3, 3x lock, then Red and Blue programming, and Dcryptor.

The yellow light on the module turns on, and 3x lock button is working fine. This setting suffices for OEM remote car starting, the only issue is that 100 feet range is too short.

I cannot pair the RFK942 kit at all, the blue led on antenna is not on, the 4x brake push does not work, the wallet button does nothing even it is plugged in.

I need some help, please! Can be a programming issue or EVO-ONE/RF kit is not working properly?

Thanks,

evo all + infiniti q40, ignition without crank

Sun, 28 Nov 2021 08:45:45 +0000

just installed and programmed fortin evo all (with NIST harness) on my 2015 infiniti q40 last night.

ignition came on but no crank. i made a short video showing the fortin and the dash.

https://drive.google.com/file/d/1FJNmTxIuUDqlJEy2StU1uMPSAu7V4Cga/view?usp=sharing

i've double checked all the connections. what could it be?

side note, i've programmed the fortin with lock-unlock-lock as RS trigger.

any help is appreciated.

2015 fusion. firmware version 4.01

Sat, 13 Nov 2021 12:05:15 +0000

Hello. I want to install evo-all (standalone) on 2015 Fusion version 4.01 (96151). Isn't it in the manager? It says 7152

Car attempts to start but does not crank

Sun, 24 Oct 2021 11:03:31 +0000

2015 Honda Accord coupe ex. It has been programmed correctly. Using a T-harness the Thar-one-hon3. It's a manual transmission with push to start and I put the car in ready mode using foot brake and E-brake. Both red and yellow led on module come on when there are supposed to but after pressing my OEM remote 3 times it appears to start but will not crank. I'm about to return this and seek another option. Any help is appreciated.

Module Not picking up the signal of the key

Thu, 14 Oct 2021 16:55:53 +0000

I flashed and updated the module also plugged in the T-Harness But Module light stays solid blue after the x5 flash is there something on this harness that needs to be hard wired it does have a blue wire and a yellow wire hanging from the T-Harness Wiring Diagram is confusing 2015 Mazda 6 Automatic

Resistor required for parking lights at BCM on 2015 RAM

Sat, 09 Oct 2021 12:15:41 +0000

Per the instructions for 2015 RAM it says to tap into the connector at the headlight switch for the parking lights output and add a 1k ohm resistor. I previously had a different remote start module where i tapped into the parking lights output at the BCM and it didnt require a resistor. Can i tap into the bcm for the parking lights output with the EVO-ALL and if so do i still need to add the resistor?

2015 Toyota Tacoma EVO-One, parking lights always on when running, and stay on after time out.

Sat, 21 Aug 2021 19:46:27 +0000

I have the EVO-One wired in with RFK942 RF Kit and everything functions, but I have three issues.

First the parking lights are always on when running. Is there a way to fix that?

Second, when the remote start times out the parking lights did stay on until the drivers door was opened, so I wired the blue wire to the door pin switch wire Green w/ yellow, and programmed Option 32 mode 3. Now the door open dash light is on all the time, acting like a dead short insted of pulsing. Did I program this wrong? I was following the advice of two other posts I found.

Three, the lights never flash when I lock or unluck the doors. Any idea why?

Please advise, thanks.

2015 Toyota Yaris Hybrid (EURO) H-key

Mon, 12 Jul 2021 04:45:11 +0000

Hello,

I'm trying to install the Evo One on a non supported vehicle. I assume all risk here.

I'm using the default configuration for the North America Yaris with the only change being Hybrid Mode D4 enabled. Programming is successful (flashing blue with key turn). When I try to start the vehicle with three pushes of the OEM lock, I get as far as accessory, but not the final ready light, so the final step "start" isn't happening. If I put the key in and turn all the way myself, everything comes on as expected.

I'm using: EVO-One w/harness. I did not cut the TPMS wire yet (waiting to see if this works). The only difference I see so far is that the ignition connector on this model is black, not green like the instructions. No errors are reporting and system shuts down as expected with a single flash of parking lights.

Are there other settings (besides D4) that need to be changed to accommodate for this being a hybrid? Any suggestions would be appreciated.

SN: 002B04 175604

Adding the 7756V Remote

Sat, 15 May 2021 22:06:42 +0000

I undertand that if I wanted to use the Directed 7756V remote I will need to add the XL XL202 RF to Data converter to my EVO ALL. My question is which antenna will I need to purchase in order for the 7756V remote to work.

2015 infiniti Q40 evo-all remote-start rf-kit push-to-start

Q40 Parking lights turn on intermittently on remote start

Sat, 10 Apr 2021 19:24:24 +0000

I have the EVO-ALL with the T-harness installed on my Infiniti Q40 and G37S Coupe. The options are set identically. On the G37, when I remote start, my parking lights always turn on when I remote start the car. This is not always true on my Q40. More times than not, the parking lights do not come on at all. Option A14 is currently off on both vehicles. I tried turning this option on on the Q40 but there is no change on how (when) it works. The only real difference between the two is the type of RF kit I have installed. Any help will be greatly appreciated.

Edit: Lights come on every time I remote start the car in the garage. Not when I start it outside the garage and it's sunny and bright. Lights switch is set to off for each of the tests.

Fortin Evo-One on EURO Yaris Hybrid

Tue, 23 Mar 2021 08:39:18 +0000

Does anyone know if this Evo-One will work on the European MY2015 Yaris Hybrid (key, not push button)? I can't find a solution in Europe for remote start, it's practicially inexistent. My key doesn't have an H or a G, it has some writing which I can't read.

THAR-ONE-SUB2 & EVO ONE on 2020 Subaru WRX PTS

Sun, 14 Mar 2021 00:31:28 +0000

I have installed the THAR-ONE-SUB2 in my US WRX per the instruction guide, page page 7/11 T-Harness - Automatic & Manual Transmission
https://cdn02.fortin.ca/download/98951/evo-one_ig_rto_bi_sub2_wrx_2019_pts_b_98951.pdf

ASK:
1.) Why is the car not starting with the Yellow/Red and Yellow/Green separeted per the installation guide
2.) Does my US WRX have to follow the Canadian Vehicle steps, if yes why and if no what is the difference

Installation was simple as mainly 2 connectors and areplug N play. I master reset my Evo One, flashed the 2020 WRX firmware and follow the programming steps on page 8/11. When I get to step 5 to start the car, the car starts and shuts off immidiately, eventually not even turning the starter. The lights on the Evo One stay solid for Red and Blue and programming does not complete to follow up on the Dcryptor part. After a little troubleshooting I found that I can get the car to start if I reconnect the Yellow/Red and Yellow/Green wires I cut eariler making the car at least drivable again.

Evo one, After remote start, Can't turn the keyless switch to ON position

Sat, 13 Mar 2021 14:52:10 +0000

After remote start, I Cant turn the keyless switch to ON position. It seems the fastkey is not being trggered, I have to turn off the engine by steping on the brake padel for example. then start the engine normally to drive. My car is 2015 evolution MR (FastKey)

How to drive after remote start without having to start the engine again.

Programming went fine, but at remote start nothing happens but flashing blue led

Sun, 28 Feb 2021 21:21:17 +0000

Hi,

wiring and programming went smooth. Working on a 2015 Honday Odyssey with Evo one and THAR-ONE-HON4. After programing when I hit the buttons for remote start the van will not remote start. The blue led flashes and that is it. Any help would be appreciated.

FORD FUSION 2015 STARTS ONCE , AFTER THE FIRST START EVO ALL DONT START THE VEHICHLE

Tue, 26 Jan 2021 06:04:28 +0000

FORD FUSION 2015 EVO ALL STARTS ONCE , AFTER THE FIRST START EVO ALL DONT START THE VEHICHLE , it try to start but HORN ONLY AND NOTHING HAPPENS< PLEASE HELP

EVO-ONE-TOY9, Remote open sliding doors when vehicle is running

Sun, 24 Jan 2021 14:54:10 +0000

I recently installed the EVO-ONE-TOY9 in my 2015 Toyota Sienna and it is working great! I have just one question: is it possible to enable the use of the open sliding door buttons on my factory keyfob when the vehicle is running?

2015 Nissan Rogue- EVO-NIST3 Won't program

Sun, 27 Dec 2020 19:15:41 +0000

Just installed today and when I plug in the unit all 3 lights continue to flash.

What now?

2015 Key system

2015 Toyota Corolla H-Key Without Smart Key Remote Start will start but won't keep it on.

Fri, 11 Dec 2020 18:24:12 +0000

Hi I have an Evo All updated to the lastest firmware as of today (12/11/2020) 79.65 I believe, with all preset options, meaning i did not turn on or off any feature on the Evo All through the FlashLink Manager. To pair with the Evo All I have an Encore E1.

My vehicle is a 2015 Toyota Corolla L H-KEY without smart key (no lock or unluck button on it)

Evo All Installation Guide with Remote Start Unit

https://cdn02.fortin.ca/download/31711/evo-all_ig_reg_bi_toy-corolla_2014-2016_hkey_h_31711.pdf

Encore E1 Installation Manual.

https://encoreautomotivesystems.com/content/pdf/one_sheet_E1_install_manual.pdf

So I have all the Evo All cables connected to the car which are

A20 to 30-pin connector position 16;

A18 to E3 White 40-pin connector position 34;

A10, C3, and C4 to OBD-II connector in its respective positions 7, 6, 14;

Also I have the Encore E1 connecting to the Evo All which are

10 Pin Encore E1 connector -> 20 Pin Evo All connector

White/Red Tachometer -> A12

White/Black Hood Pin -> A15

Black/White Brake Shutdown -> A11

White Ground when Runing bypass output -> A8

Pink Security Disarm Signal -> this is connected to Lt. Green wire in the Driver Kick white connector.

So its missing couple wires to be wireout such as:

Encore E1 10 pin connector

White/Blue Instant Start Input (+) -> which i have no idea what is the purpose of this wire and where to connect.

Gray Channel 3 Trunk Output -> i didnt do it because i dont have a eletronic trunk release, mine is manual pull up type.

Blue/Black ACC2 -> because my vehicle doesnt have a second ACC

Yellow Ignition 3 output -> again because the car doesnt have it.

So, to summarize, the vehicle locks and unlock just as it should through the Encore E1 4-Button remote control, however, the remote start function will turn on the car in the first try but it will only stay on for 5 seconds, then it shut itself off. After, it tries to start it again, and the cycle repeats 1 more time after that, totaling 3 tries. It starts but wont keep on after 5 seconds.

What am i doing wrong? what am i missing here?

I have no idea whats missing or why this is happening. If someone has an idea, please share with me. Thank you so much.

no key detected 15 focus

Fri, 11 Dec 2020 15:25:08 +0000

my focus will not complete the key recogition cyle even though ive tried to program it a few times now the same no key detected comes up

evo all

sn 001a07 153870

firm 71.45

stand alone start with 2 keys

2015 Nissan Altima Ignition Ignition 2 wire

Wed, 02 Dec 2020 10:08:45 +0000

Not a question so much as an update to your notes. On the installation instructions it shows Ignition 2 as Pin 9 Black 24 Pin plug as a Pink wire. Vehicle I had it is not a Pink Wire it is Brown but when tested goes + when PTS is hit for ACC or IGN.

No key detected message, Ford transit connect

Sat, 21 Nov 2020 01:47:57 +0000

After programmed evo-all fort1 in ford transit connect 2015 all of my original keys stopped working and I have a message "No key detected". Programming procedure went exactly the same as in the guide. Car doesn't start with the 3xlock also. any Idea what is the problem ?

Why the dashboard light turn off after about 20 minutes?

Wed, 18 Nov 2020 22:12:33 +0000

Installed evo one on 2017 Tacoma Tundra with T-harness everything works fine, but at night the dashboard lights turn off after about 20 minutes since the vehicle is running. So the dashboard completely dark not unless I turn off the lights and turn it back on again.

I know for sure is the evo one causing the problem. When I completely disconnected the module everything seem to be fine.

Please help.

Wiring issue Mazda 3- 2015-PTA-Automatic

Wed, 28 Oct 2020 12:04:59 +0000

I boutght The mazda EVO-All with T-harness for my 2015 Mazda PTA automatic and I am confused about the wiring on number 2,3 and 4 in red circles.

On guide #62681 page 6 at the bottom of the page(#2 in red circle) it says that I need to connect LT.BLUE/BLACK Wire to Pin#8 and the Lt.Blue wire to #9 pin on 32-pin White connector.my question is how am I supposed to do this?Do I need to disconnect the 32-pin White connector from Car and connect these 2 wires individually to the part which is attached to the car or the part wich I disconnect from the car?there is no conncetor in the harness to connect these 2 wires.

I have the same issue with #3 and #4 in RED circles at the bottom of the page 6 as-well.how am I supposed to conncet the D section on Evo-All to #1 & #3 on the 8-pin White connector and also connect 4A an 4B on the engine compartment.

I do not see any part on the harness to coonect these parts.am I supposed to buy connectores,strip the wires and attach the wires by myself?there is no extra connector or pin or wire stripper in the package.

Thanks for your help.

I can not get the blue light to flash on the module on the last step of programing.

Thu, 30 Jan 2020 18:43:24 +0000

2015 dodge dart

Will the THAR-GM7 work with a 2015 Sierra?

Tue, 21 Jan 2020 11:20:21 +0000

When looking up the 2015 GMC Sierra, it lists the THAR-GM3, GM5, and GM7. Whe I look at the guide for the GM7, it only lists 2019. The harness appears to be correct, but I would like to confirm before purchase.

Thanks in advance,

Brad

2015 Sienna PTS No Ignition

Sat, 18 Jan 2020 14:58:44 +0000

I am not using a T harness. I have double and tripple checked my wires and even tried reversing the TC and RX wire but when I do the 3x lock it flashes and clicks on the bypass but it does not power the ignition. The yellow light does not illuminate on the bypass. I was able to get the car to start 3 times out of 20 attemps. It was typically right after either programming the module or starting the car, shutting it down and then immediately remote starting it but I cannot consistantly replicate this. Im wondering if there is an issue with the module. I do not have another to swap it out with to try.

I have tried to see if there is a factory remote starter by pressing the lock button 3 times and on the 3rd holding it for 3sec and the car does nothing leading me to believe there is no factory remote starter on it.

The 12 digit service number on mine is 001A06846569

Anyone else having problems with warning lights and stalling?

Fri, 10 Jan 2020 21:21:35 +0000

I installed my EVO in my 2015 Ram1500 SLT. After installation, the truck does start immediately without problems, but now on a couple occasions the truck has stalled when accellerating from a stop at low speeds and on other occasions every warning light on my gauge cluster will flash and my 2WD light will flash when going at normal cruising speed (45-60 mph) and I lose power. If I take my foot off the accelerator and coast, the lights will slowly go off and I resume control and acceleration. Anyone else experience this? My fear is that it is messing with the ECM Module. I used the T-Harness for the installation.

Démarreur fonctionne mais alarme déclenche

Fri, 10 Jan 2020 09:48:18 +0000

J'ai une Honda fit 2015 ..lorsque je l'ai acheté récemment le démarreur a distance fonctionnait bien..depuis quelques jours lorsque je veux la démarrer a l'aide de ma manette , l'alarme déclenche et je dois me rendre a mon véhicule pour l'arrêter..( batterie , reprogrammation ?) Merci d'avance Ma manette c'est une FAR XH208A

Flashing Red LED After Programming

Sun, 22 Dec 2019 19:08:14 +0000

After first stage of programming the EVO-ALL with my Mazda 3 '15, programming with the computer, then following steps 1-12 again (Guide 62681), the EVO flashes RED with no other lights. I tried following all steps again a few times, with the same result. The security light on the car rapidly flashes for a few seconds as well. What should I try next?