Questions & Answers - Recent questions tagged 2018

le tiguan 2018 ne demarre pas, la cle valet entourée de fils ne semble pas fonctionner

Sun, 25 Jan 2026 22:42:37 +0000

Quand on actionne le demarreur, on peut voir sur le tableau de bord qu'il ne voit pas de clé. il essaie 2 fois et barre les portes. les lumieres du vehicule flash 1 fois. J'ai 10 tours de fils autours de la cle valet.

Merci de m'aider

2018 Fusion

Wed, 10 Dec 2025 14:58:16 +0000

I installed Evo-All on 2018 Fusion. The car starts, but the interior heater doesn't turn on. Is this how it's supposed to be?

Is there t-harness available for 2018 Outlander Sport standard key?

Tue, 17 Jun 2025 09:59:17 +0000

Is there t-harness available for 2018 Outlander Sport standard key? Thanks!!!

2018 KIA Niro PTS Hybrid OEM Alarm honks twice with remote start

Sat, 12 Apr 2025 17:25:30 +0000

2018 Kia Niro PTS Hyrbid installed a compustar remote start system with EVO-ALL, everything works fine but I get 2 horn honks during runtime as if the factory alarm kicked in. Is there a key sense wire that needs to be hooked up since Kia did the updates to all of their cars so they don't get stolen?

2018 ford edge evo all with radiostar generation

Fri, 04 Apr 2025 07:07:03 +0000

Hello everyone,

Looking to install this evo all with this radiostar generation remote starter (https://policeauctionscanada.com/Listing/Details/49897032/Radiostar-2-Way-LCD-Vehicle-Security-System-Remote-Start-240093B) As my buddy is insisting to use it. It wouldve been a lot easier if i do it with fortin RF kits. Anyway. My question is according to the this diagram on the fortin website (https://cdn02.fortin.ca/download/66011/EVO-ALL_IG_SAL_BI_FOR-EDGE_2015-2017_C_66011.pdf)

Where should i connect all those dotted lines going to the remote starter? There is no datalink on this remote starter. Unlock and lock to the remote starter side? Specifically the “start/stop external” and the “convenient ignition out” from evo all going to the remote starter side? Im confused. Please help. I appreciate it. Thanks in advance

Mazda 3, 2018

Sun, 02 Feb 2025 10:18:43 +0000

The unit does not read the key, when the ignition is turned on nothing happens, the blue indicator continues to light

Mazda 3, BN, 2018

2018 RVR LED & headights light Flash continusuly after Remote Started

Tue, 10 Dec 2024 11:55:48 +0000

Hello everyone

We installed an Evo-One on this RVR 2018 with factory HID headlights and LED Fog light using 23101 guide. We followed the guide to a T, the issue we are have is that as you remote start the vehicle using 3X lock the vehicle starts properly, but if the lights are set on automatic, the headlights and LED lights flash continuously as well if you turn off the lights and remote started the Vehicle the LED fog lights flash continuously both will flash until you take over the vehicle. Has anybody come across this? We think it might be a faulty EVO one module any thoughts please help.

subaru crosstrek and take over

Fri, 29 Nov 2024 13:22:55 +0000

Hello. I installed evo-one (3x lock) on 2018 Subaru Crosstrek. When opening the door the engine stalls... What could be the reason?

2018 SUBARU OUTBACK (US Model) - EVO ONE - THAR-ONE-SUB1 & THAR-ONE-SUB3 - Module will not program

Sat, 27 Jan 2024 22:12:34 +0000

This is on my 2018 Subaru Outback, US model

REGULAR KEY - Automatic Transmission - No factory alarm system (from what I can tell) - Yes factory immobilizer

Remote Start: Fortin EVO One. Firmware Version: 84.12. Using Flashlink USB programmer.

Wire Harness: THAR-SUBONE-SUB1 & THAR-SUBONE-SUB3 (both SUB1 & SUB3 harnesses simultaneously I guess? Though initially unsure, I went forward & did order and installed both as shown in the diagram linked in the next line down. Specifically, on page 5 out of Ten, the page with the heading: THAR-ONE-SUB1 & THAR-ONE-SUB3 | AUTOMATIC TRANSMISSION CONNECTION )

I made the connections as indicated on this PDF I found on your website: https://fortin.ca/download/99401/EVO-ONE_IG_RTO_BI_SUB1-SUB3_OUTBACK_2018_KEY_A_99401.pdf

Before connecting to the car, I:

1. connected the evo one to my laptop & ran the flashlink software.

2. The software recognized the USB programmer.

3 Then I plugged in the Evo One module & confirmed it was detected in flashlink software

4. I logged in, then input the following vehicle data: 2018 subaru outback, regular key .

5. I let the flashlink software download the newest firmware & recommended settings for the 2018 subaru outback
6. I hit the program button to send the configuration to the Evo One

7. Disconnected Evo one from the flashlink programmer & held down the programming button

8. While holding down the programming button, plugged in the 6 pin connector from the Sub-One harness, at this point installed in the car, to the Evo One

9. Continued holding down programming button while the red yellow & blue lights cycled, then released the button when the lights were lit up RED & Blue simultaneously

10. Began to press the programming button 6 times to enter the programming mode

11. However, right after the very first push of the programming button the red & blue lights would blink once & then go back to solid red & blue so I continued pushing 5 more times to get a total of 6 presses.

13. At this point, the module is blinking red & blue simultaneously 5 times in a row > pause > blink red & blue 5x again > pause > red & blue 5x blink > continues in perpetuity until I insert the vehicle key & turn it to the Ignition 2 position (2 clicks/aka accessory mode)

12. Soon as key turns to ignition 2 setting, The RED & BLUE lights both light up & stay on continuously.

13. The instructions say to start the car at this point, but turning the key from Ignition 2 to Start does not cycle the starter. No lights dim, no clicking from relays, it is not even trying to start.

14. I hold the key in start position for about 2-3 seconds, then release it back to ignition 2 which would leave the vehicle running normally if it had started at this point

15. The red & blue lights on the evo one continue to stay lit continuously & never reach the part where they flash 10 times, ostensibly because the engine never even started still which does make sense.

I guess my question is, does this have anything to do with the jumper that is shown in the PDF? I don't understand what the diagram is trying to say with the Jumper A & Jumper B section. Does the jumper in jumper A need to be removed? And then the cable in the jumper b position get plugged back into the Sub 3 harness? But only for the outback & legacy models of the car? I'm not quite clear what I'm supposed to do with the jumper A OR the Jumper B. So I just left them both plugged in.

After a while sitting in ignition 2 position with the red & blue lights lit up on the evo still, I just gave up & turned the key off then unplugged the : 5p Data link wire > 6p red plug > 20p white plug > 6p main power plug from the evo to turn it off. Then plugged it back into the flashlink programmer & attempted to see if I could do the decryptor programming anyway, but as expected I get the notification that the module never received the datalink information

I also tried reflashing the module once or twice to be sure the settings stuck, the behavior of the vehicle stays the same. I have read through about 50 of the first quiestions that were relevant to this generation subaru that I could find on here and have not seen this answered elsewhere. I hope maybe someone can advise me on what tthe jumpers do, what I should do with the jumpers in jumper A & jumper B plugs, and how they would affect, if at all, the vehicle no longer starting with the regular key

2018 Ford Edge PTS Evo All T Harness

Sat, 30 Dec 2023 20:35:06 +0000

Hello, I have the Evo All W/ Evo Start in my 2018 PTS Ford Edge, looking through the menu options in flash, under SPECIAL OPTIONS i am wondering what

E1 GPS I/O,

E3 ODB INFO are used for ?

AS ALWAYS, THANK YOU ALL !!!!

Audi 2018 Q5 EVO all and EVO start LTE

Sat, 14 Oct 2023 06:22:56 +0000

Hello. Things are working fine with the Audi 2018 Q5 EVO all and EVO start LTE. But, a couple of questions:

- is there a way to control the heated seats in the app?

- the fuel gauge shows 0% in the app

- I don’t see notifications on my Apple Watch. I thought I read that that was possible.

Thank you

2018 Acura MDX EVO-ONE + T-Harness w/ take over

Mon, 09 Oct 2023 12:04:29 +0000

Have such problem’s:

1) Almost always (7/10 remote starts) after successful remote start have keyless access system indicator after press and release the Push-to-Start button once

2) and I think as a continuation’s of the 1st problem do not work multi-view rear camera (also 360 view) and blind spot system. When I turn on reverse gear I dot alarm on display: rear view camera do not work when engine do not start. So only stop and start engine again fix it.

Please advise

Evo-One 2018 Ford F150 Programming Issue, Blue LED does not turn OFF on unit

Fri, 28 Jul 2023 14:01:33 +0000

2018 F-150 STD-key w/o keyless. After pressing the program button 8 times red and blue LEDs are solid. Putting key near ignition does nothing, inserting the key, then removing it, the ignition turns on, then red LED blinks and ready for next step. I cant seem to get the blue light to come off during step 6 without inserting the key, not sure why. I've tried multiple firmwares but they all do the same. I've also verified my wiring.

2018 Tucson

Thu, 02 Mar 2023 12:26:34 +0000

Hello. I'm currently installing an evo-one on a 2018 Tucson. The blue connector in the kick panel is different from the one shown in the diagram (97941). EMC com is not located there. There is a white wire in another place and it says LIN...Use this white wire?

2018 Subaru Outback Push-to-start won't run HVAC system when remote started

Mon, 09 Jan 2023 21:46:05 +0000

ISTALLED EVO ONE ON PUSH TO START 2018 SUBARU OUTBACK LIMITED. THE QUESTION IS WHY WHEN REMOTE STARTED THE HVAC SYSTEM WON'T TURN ON AND RUN?

2018 Passaat-Skoda octavia

Mon, 07 Nov 2022 05:13:46 +0000

Hello. I wanted to install evo-all on 2018 skoda (standalone). I registered both 66-04 and 67-04 (Passat) for two devices (001A07246895 ... 001A06895330). I connected both the ignition wires and the can wires. The CAN wires were in the BCM connector (orange-green to gray and orange-brown to grey-black). I release the button to blue, and as soon as I open the ignition, the blue goes out and nothing else happens. When I turn off the ignition, the blue lights up again. What to do?

EVO-ALL or EVO-ONE

Mon, 30 May 2022 17:25:29 +0000

I am preparing to do a remote start installation on a 2018 Infiniti Q60 (3.0L). The remote start module (with T-Harness) will be paired with the RFK-942 RF kit. I've installed the EVO-ALL on a 2016 Q50 and a 2017 Q60 (both 3.0L, both with T-Harness and both with RFK-942) and they are functioning well. My question to you is what would be the benefit of choosing the EVO-ONE over the EVO-ALL? For example, would I gain any additional functions (such as, trunk release via RFK-942 remote, parking lights control, etc.) if I went with the EVO-ONE instead of the EVO-ALL?

2018 Audi Q5 proximity key unlock, engine auto stop-start, and folding mirrors on lock not working

Tue, 22 Feb 2022 00:46:19 +0000

I have recently intalled EVO-ALL AUD2 / AUDT2 and things work just fine. However, it seems like proximity or smart keyless entry / unlock does not work when remote started. I have to press unlock button to get in the car. Also, my mirrors do not fold when shut down remotely by RF remote. Only if I use the OEM fob to lock the car will the side mirrors fold.

Is this a programming issue or something mechanical? Any fixes? Thanks!

EDIT: Also, another thing I noticed is the "auto engine on/off" or "auto stop-start" (e.g., at traffic lights or when idling) does not work when remotely started. Is that common after installing fortin?

KLAXON APRÈS DÉMARRAGE

Sat, 12 Feb 2022 10:00:19 +0000

mon mazda cx5 2018 klaxonne après le démarrage avec mon démarreur a distance viper modele 7145 v. il a commencé ca... avant non tout était silencieux. j'ai changé la batterie du véhicule peut etre ca ?

2018 lexus ls 500h

Wed, 01 Dec 2021 12:39:11 +0000

Hello. I am installing evo-all (standalone) on a 2018 lexus LS 500h (hybrid). Which guide should I be using?

2018 camry H key

Sun, 28 Nov 2021 16:24:31 +0000

Hello. I want to install evo-one (002B04138125) on 2018 camry (euro-H key). I made the firmware (099) and when I connect to the car, holding the program button, all three LEDs light up constantly and that's it. What to do? Last year I installed it on such a car and there was no problem. I upgraded to 0.67 .... Now when I turn on the ignition, the blue LED goes out. In the manual that the firmware 88.15 is indicated, where can I find it in order to rewrite it into the module?

2018 Subaru Outback, standard key, EVO-ALL try's to start with 3X lock, but engine doesn't turn.

Sun, 21 Nov 2021 23:57:13 +0000

Hello, and thanks in advance for the help. I am stumpped on this one.

I installed an Evo All in our 2018 Subaru Outback, standard key, standard installation. I connected and double checked all wires per the diagram. For the immobilizer I used the white/lt. blue wire on connector 3 instead of the white/blue wire on connector 4, becuase the wire on connector 4 did not exist. I completed the FlashLink Updater and dcryptor.

When I go to remote start (3X lock), the red led comes on, then the yellow, but it doesn't start. Then it trys again and then the red led flashes 3 times and they all turn off.

What am I missing or doing wrong. Below is the Connector 3 and 4 wiring option and a link to my installation guide.

Here is the installation Guide # 71981

2018 odyssey bcm location

Sat, 04 Sep 2021 12:53:11 +0000

Can't find BCM location for 2018 odyssey. Guideline point to steering area but nothing there. Please help.

RFK 411 Not flashing blue rapidly when trying to program new keys

Mon, 21 Jun 2021 22:18:15 +0000

I bought Fortins Rf Kit (rfk 411) after being able to program the fobs to the antina i was able to start my vehicle but only start it i wasn't able to unlock the car or lock the car with the fobs having this issue i decided to factory reset my evo and start from scratch and being able to reprogram the keys in order to reslove this issue. I have factory reseted my evo three times in order to get to where i need to program the keys.

My current issue that im having now is when i go to program the keys. I plug in the antina and everything to the evo. The antina flashes blue once but when i go to put the evo in progamming mode and put the key in the igntion the antina should be flashing rappidly but its not. The antina only flashes when the vehicle is armed

Evo-one keeps disconnecting from Flash-link when trying to program remote starter options

Sat, 05 Jun 2021 18:18:02 +0000

Flash link not detecting Evo-one when trying to access remote starter programming. Bypass features program correctly but can't access remote starter options. S/N 002B04 134160 Every time I try to access remote start settings on Flash-link, it auto selects special unit and Evo-one red led shuts off then loses connection.

THAR-ONE-SUB2 & EVO ONE on 2020 Subaru WRX PTS

Sun, 14 Mar 2021 00:31:28 +0000

I have installed the THAR-ONE-SUB2 in my US WRX per the instruction guide, page page 7/11 T-Harness - Automatic & Manual Transmission
https://cdn02.fortin.ca/download/98951/evo-one_ig_rto_bi_sub2_wrx_2019_pts_b_98951.pdf

ASK:
1.) Why is the car not starting with the Yellow/Red and Yellow/Green separeted per the installation guide
2.) Does my US WRX have to follow the Canadian Vehicle steps, if yes why and if no what is the difference

Installation was simple as mainly 2 connectors and areplug N play. I master reset my Evo One, flashed the 2020 WRX firmware and follow the programming steps on page 8/11. When I get to step 5 to start the car, the car starts and shuts off immidiately, eventually not even turning the starter. The lights on the Evo One stay solid for Red and Blue and programming does not complete to follow up on the Dcryptor part. After a little troubleshooting I found that I can get the car to start if I reconnect the Yellow/Red and Yellow/Green wires I cut eariler making the car at least drivable again.

2018 Tundra, OEM alarm connection (orange wire)?

Sat, 13 Mar 2021 14:32:10 +0000

Nevermind. I figured it out.

2018 traverse

Wed, 17 Feb 2021 19:45:43 +0000

procedure #6 stay on solid yellow

any solution?

2018 Subaru Outback Push-to-Start. Starts and runs but dies after a few seconds.

Thu, 04 Feb 2021 00:39:20 +0000

2018 Subaru Outback Push to start with THAR-ONE-SUB2. Everything seems to work correctly. Car starts with 3x Lock but then dies after running for a few seconds. Attempts to start again, runs for a few seconds then dies again. Any Ideas?

THAR-ONE-SUB2 harness question on US 2018 Subaru Outback

Tue, 02 Feb 2021 11:29:49 +0000

On a US 2018 Subaru Outback with THAR-ONE-SUB2 Harness do you need to cut and splice into wire off of pin 44 or just connect the two yellow/red, yellow/green wires together and not touch the wire off pin 44. Having a hard time figuring out the diagram.

2018 SUBARU PUSH TO START ATTEMTS TO START BUT NO CRANKING

Mon, 14 Dec 2020 11:08:02 +0000

I have installed and programmed the Evo ONE module on 2018 Subaru Outback Push to Start. The module have been programmed and dycrypted when everything is connected, and 3xlock button is pressed on the remote, the car tries to start 2 times, but there is no cracnking sound on the engine. Please help.

I have also tested the voltage from the root wire and the end(connector), on both sides Immo wire puts out 10.9 Volts.

Another thing I have tried to get the voltage reading oin the Yellow(+Starter) Evo Module wire and it is not giving me any readig (0 V), and the main harness WiteGreen(on the green socket Pin34) isn't giving any voltage reading either, is it supposed to be 12V, when the car attempts to start the wire give 12V. any clues?

P.S. When the car tries to start the starte make clicking noise, but the engine won't crank, so basicaly the starter is in a zooming stage.

2018 Subaru Push to Start attemts to start but no cranking

Sat, 12 Dec 2020 14:57:07 +0000

Why does my factory alarm activate on remote start 2018 Toyota Tundra?

Sat, 21 Nov 2020 20:35:51 +0000

Installed recommended firmware.

Evo-All vs Evo-One for Audi S5 2018?

Sun, 15 Nov 2020 13:08:24 +0000

I'm looking to buy a remote starter but don't see the difference between the 2 models suggested for my car. What are the differences?

What's the max distance to remote-start the car?

My car is still under warranty. Can I still install the remote?

Thanks

2018 F-550 no HVAC

Sat, 24 Oct 2020 00:05:13 +0000

Hello,

I Installed FORT3 EVO-ALL on a 2018 F-550. I thought it was all good, but noticed the other day that the HVAC controls do not work while running remotely. The only connection I made was behind the OBD2 port, by far the easiest/fastest remote start install ever!

Am I missing something on the programing of the EVO-ALL, or do I need to make another connection for HVAC to work properly.
Thank you,

Joe

Does evo-one will give option of 3lock from oem remote to start the 2018 Subaru Outback

Wed, 16 Sep 2020 12:47:38 +0000

I want to know if i need to buy a separate RF kit for 2018 Subaru Outback Limited Push to start, or Evo_One offer the option of 3lock Oem renote start and 3unlock to stop the remote started car? Alsoi will OEm remote will be functional after the remote start of the vehicle?

2018 Subaru WRX PTS Manual Transmission

Tue, 15 Sep 2020 10:25:05 +0000

Hello,

I'm looking for a T-Harness installation for a 2018 Subaru WRX PTS with manual transmission. Are you guys gonna have anything for this anytime soon??

I can not find the pink and white ignition wire (9 v)?

Tue, 09 Jun 2020 22:40:23 +0000

I have a 2018 dodge challenger v6 push button start and this is the only wire I can find.

2018 Kia Niro Hybrid PTS, after installation NO lights on cluster no power

Fri, 17 Jan 2020 00:25:02 +0000

2018 Kia Niro PTS Hybrid brand new installing Evo One for X3 Lock. No power on the car at all i check the installation and everything seems fine... but no power on the car at all..

Solid Red LED immediately after plugging in Data-Link Wire

Wed, 08 Jan 2020 17:42:26 +0000

I have an EVO-ALL unit with T-Harness THAR-GM1. I went through the initial steps for programming, programmed the unit using the Flashlink Manager software. Reinstalled into the car, remote start did not work. Attempted to redo programming. Unit began displaying a solid Red LED. I held in the programming button and inserted the Data-Link wire and it immediately displayed the solid Red LED again. I continued to hold the button in for several minutes and the Red LED remains lit. I then tried to reconnect it to Flashlink Manager, and it detects it. I tried to reinstall the firmware and it installs. I take it back to the car to try programming again, and again i received the solid Red LED immediately. I am at a loss as to what the problem can be.

2018 ram 1500 standard key, blue led not flashing , stays.solid blue.

Wed, 18 Dec 2019 11:00:57 +0000

I follow the steps and everything goes well until the very end when I put the key back in ignition turn to.run. red led.goes out but blue doesn't..blue stays solid and doesn't flash at all. fast or slow like supposed ro

F150 2018 setup procedure not functioning

Sun, 15 Dec 2019 12:12:50 +0000

Hello, when installing the Omevoall with supplied tharness and following the plugin procedure, the blue light does not flash after placing the vehicle on run. Procedure currently being followed:

1) when the vehicle off, plug in the black plug into the black connection while holding the button and only letting go on a full blue light.

2) plugging the white plug into the white connection.

3) placing the vehicle to run.

Blue light stays as a solid blue and does not start flashing.

firmware 71.47

thar-ford3

Can you use the OEM Remote to unlock/lock after EVO-ONE remote start has been activated in Hyundai Tuscon 2018?

Wed, 27 Nov 2019 19:08:23 +0000

Looking to configure the EVO-ONE with a Hyundai Tuscon 2018 with OEM Remote, how will the OEM remote function after the car has been remote started. The guide says the remotes will not be operable during remote start?

Thanks!

2018 Mazda3 install for a manual (6spd)

Tue, 19 Nov 2019 18:40:48 +0000

So it says it will work for a 2018 Mazda 3 Push Start with a MANUAL transmission.

If so, how? I'm familiar with componets and T-harness - This would be my 3rd... Is there a clutch bypass? Does the trans need to be in neutral, if not I assume it wouldn't start - or it would attempt while in gear?

Has anyone else installed on this make/model = gotchyas or problems ??
Has anyone installed on a manual trans = extra steps or worth it (juice worth the squeeze) ??

I've installed on automatics ('15 Town & Country and 10 Caravan) - si I get the over all process with the Harnesses and EVO modules.

TY!!!

2018 silverado 1500 rf kit with keyless entry

Thu, 14 Nov 2019 11:49:06 +0000

If I install the evo gm5 and add a 2 way rf kit will I be able to use my factory keyless functions from the new remotes without any additional modules. I have ordered the gmt5 with tharGM5 and the Flashlink 4 .

connect evo one to 2018 tacoma manual transmission

Tue, 12 Nov 2019 20:05:24 +0000

hey there ,, purchased an Evo one for my 2018 Tacoma with h-key manual transmission,,, need to know to how to wire it in for clutch cancel ?!?!?!?!?!?!? thanks in advance

2018 Ford F-150 STD key evoall not starting truck

Mon, 11 Nov 2019 18:39:35 +0000

2018 STI push to start, where is it?

Mon, 11 Nov 2019 12:45:06 +0000

I bought my car new in may of 2018

They dont come with a remote start so I purcharsed a EVO-ONE by Fortin to install. It comes with a card for wire color to show where the connections go but when I checked last year this time the 2018 push to start wasnt added.

I emailed wire color last year and they said it should be available sometime soon but now, a year later and snow hitting again I'd like to be able to finally hook this thing up

It sucks not having remote start in the cold climates

When should this be added?

2018 Ford F150 Std Key Fort3 isnt remote starting car

Thu, 31 Oct 2019 22:28:22 +0000

Plugged in the Tharness correctly. When connecting the moduel I held down the small button on it while connecting the black power wire, and let go of it when the light was blue. Connected the white wire on the other side of the module. turned on truck to ignition on, waited for blue light to flicker for a bit then ignition off and key out. Tried the triple press on lock and nothing happens. Turn to ignition on again and the module is showing a yellow light.

Cant get the remote start to work

kia forte 2018 automatic transmission, no data wire, evo-key.

Mon, 28 Oct 2019 17:14:12 +0000

I was trying to install a remote starter with an evo-key, for a kia forte 2018 automatic transmission and I found that this model has no data wire and this is the only wire that says the installation guide that should be used for the evo- key, then what do I do in this case. thank you .