Evo-one 2020 forte wire cuts?

Sat, 04 Apr 2020 16:33:30 +0000

I can see from the diagram, D1 and A10/D3 are tapped to the Brown/Orange (EMS COM) Pin 65 on the red connector and the wire is cut between the taps.

I can see its the same on D4 and D6 on the pink wire off the 54-pin connector at the rear of the fusebox.

Im a little confused about the orange wire on the same 54-pin connector and the D5 Connection.

From the diagram it appears that i have to cut the orange wire between pin 30 and 87a on the ignition relay? And D5 connects to pin 85 of the same relay....is this right? Or do i have to add a relay? can someone explain these connections a little more clearly?

Evo-Start2 2020 Forte Install question

Sat, 04 Apr 2020 12:46:59 +0000

Im installing an Evo-one with KHY2 in my 2020 kia Forte with an Evo-start 2. I've got the wiring figured out for Evo_one but the install for the Evo-start2 has me a little confused. The blue 4 pin antenna connection is obvious but im using a T-Harness (KHY2) for the Evo-one. The Evo_start install says to use the Black 4 pin Data link t-harness connector. There isn't one on my tharness. Could i get a little clarification of what i need to connect on the antenna cable besides the blue 4pin and the yellow ignition wire. The Evo-start2 install instructions shows 3 different installs for the Evo-one and all show the use of a 4 pin data connector either from the tharness or a RFA2A. The antenna cable has more connectors then any of the diagrams show. The 2 blue connectors and the yellow ignition wire are shown but the diagram doesn't show the black 4 pin female or the white 4 pin female or the other 3 wires (red,black,and green) on the antenna cable.

Questions & Answers - Recent questions tagged 2020forte

Evo-one 2020 forte wire cuts?

Evo-Start2 2020 Forte Install question