Questions & Answers - Recent questions tagged 3-leds-flash

I can’t program chrt4 all light plinking

Wed, 31 Mar 2021 15:01:54 +0000

I try to program the evo but when pres the the key and connected the 4 pin all the lights are plinking and not convert to sold blue I repeated many times and re connect all the wire again

2009 Dodge ram, I looked at the guides and install going by them but all i get is all 3 leds flash

Sat, 30 Jan 2021 20:58:14 +0000

Please help frustrated

All LEDs are blinking rather than alternating?

Wed, 05 Aug 2020 00:32:56 +0000

2012 Ram 1500 standard key. after installation and wiring ready for programming, i plugged the data connector I just had all LEDs blinking. the first unit was replaced and i have the 2nd now but still the same, is there a problem on the unit itself or just my vehicle?

all 3 leds continue to flash when data linc harness plugged in cant program

Sun, 26 Jan 2020 17:36:05 +0000

once installe on a 2017 ram 1500 tip key all 3 led continue to flash cant program

I've installed my evo-nist1 per install guide #74301 and no start.

Tue, 18 Dec 2018 00:53:06 +0000

3X lock and the evo goest through a cycle, parking lights illuminate, brake lights illuminate, but no start. The more I attempt to research the issue the more diagrams I see with different wiring diagrams. Evo also flashes red three times upon completion of cycle. I have exhausted all options I could come up with on my own to resolve the issue, to no avail. Please help!

2015 Nissan Sentra SV push to start

2015 Dodge RAM 1500 diesel won't start (all LEDs flash 25 times)

Mon, 03 Dec 2018 12:20:46 +0000

Hi,

I tried multiple times to get the EVO-ALL module programmed / key decrypted, and after each attempt, after plugging in the module causes all 3 LEDs to flash 25 times, and the module does not respond to the key fob.

I am using this installation manual: http://cdn02.fortin.ca/download/29301/evo-all_ig_thr_bi_chr6-ram_2013_key_e_29301.pdf

Verified all connections multiple times. Please advise what can be done to fix this.

Thank you!

Ever wonder what the led's on the evo mean?

Mon, 24 Oct 2016 17:36:15 +0000

A simple and quick explanation!

Blue led's flash 3x when remote pushed but no start,could the dycripter be wrong?

Wed, 24 Feb 2016 09:34:49 +0000

Blue led's flash 3x when remote pushed 3x but no start,could the dycripter be wrong? Also if I reflash the Bypass side to a different version do I need to run the dycripter again?

When plugging the data-link connector to the EVO-ALL all three LED's flash 25 times

Fri, 11 Dec 2015 17:46:15 +0000

When connecting the Data Link cable from the remote start to the EVO-ALL all three LEDs flash 25 times.

While debugging a door lock problem on a 2013 Subaru Crosstrek I did a master reset on the EVO-ALL, set the C1 option as directed and when connecting the EVO-ALL data link cable all three LEDs began flashing.

This is the second unit that this has happened with the same exact scenario. The first unit also had a bad data link connector causing intermittent power but after receiving the new unit and installing with the same lock problem I reset it and experienced the same exact problem.

Re-Flashing the unit with any version of firmware has no effect. Same problem. Both units communicated with the Flash programmer without any problems only when connected to the remote start do I see the problem.

I would have thought it was the cable but... The new unit worked perfectly with the same cable until I reset the unit.

Help please.

------update 12/14/15

Two things. When I say three LEDs are flashing I mean all 3 are flashing at the same time not sequentially. On the first unit I tried reprogramming the key but this was not successful but I don't remember the exact problem.

After reset and connecting with the Flashlink2 I can see that the key bypass is still there and active. Are you saying that I need to run the decrypter programming sequence again?

At the moment the Evo-All will not talk to the compustar at all except to pass signals through.

Thank you

LED color description?

Fri, 13 Dec 2013 18:39:39 +0000

I apparently programmed evo all succescully... Flshing lue led and all. Now whe i click the lock the blue led blinks as i do it. Then nothing happens. I use the key to start the car and yellow comes on and stay on till the car is off. Is this ok. What it means? Thanks .