/en/qa/tag/3-pin Powered by Question2Answer /en/qa/87717/evo-one-alarm-shock-sensor-warn-away-only Evo one alarm. Shock sensor only triggers warn away. When tested without sensor plugged in short pulse triggers warn away. Long pause does the same. Cannot get full alarm to trigger at all. 002807 242359 Remote Starters /en/qa/87717/evo-one-alarm-shock-sensor-warn-away-only Wed, 05 Jun 2019 01:20:23 +0000 /en/qa/76792/what-is-the-specific-name-of-the-plastic-3-pin-shock-sensor-connector-on-an-evo-one I have been to several electronic stores, auto parts stores, and searched the internet. It would help tremendously if I had the specific name of the type of connector used for the 3 pin shock sensor port on the evo-one. I would prefer to have the plastic connector instead of hard wiring it or using butt connectors on the pins. Its hard enough to find a butt connector btw. I have my sensors and the wiring ready to go all i need is the specific name of the plastic connector. Thanks in advance FAQ /en/qa/76792/what-is-the-specific-name-of-the-plastic-3-pin-shock-sensor-connector-on-an-evo-one Fri, 20 Jan 2017 15:21:41 +0000 /en/qa/75308/3-pin-shock-sensor-connector What is the name of the type of connector used for the shock sensor port and where can I purchase a connector with a wiring harness? <br /> <br /> If I wanted to add a tilt sensor and wired the trigger into the pink/black wire (A15) would it give me a proper tilt alarm response if triggered on a two way remote or parking light flash upon disarm? I know I need to tie the trigger for the tilt alarm into zone 8 for that I just dont know where to do that. <br /> <br /> Are the ground and 12v leads coming from the shock sensor port only active when the alarm is armed or are the always active? FAQ /en/qa/75308/3-pin-shock-sensor-connector Mon, 26 Dec 2016 14:23:25 +0000