Questions & Answers - Recent questions tagged 3500

04.5 dodge ram 3500 5.9 Cummings

Fri, 13 Dec 2024 01:31:39 +0000

What do I need to install remote start on my truck and is there a t-harness that will work with my truck for easy installation?

2023 chevorlet 3500 using evo all the doors lock after shutdown with key in ignition? any work around?

Tue, 02 Jan 2024 13:26:18 +0000

doors lock with keys in vehicle automatically when exiting?

I have 2020 chevrolet silverado 3500 super duty an ned all in one module and harness so which one is work for my truck?

Tue, 12 Dec 2023 20:58:05 +0000

I have 2020 chevrolet silverado 3500 super duty an ned all in one module and

2014 ram 3500 will not remote start. Manual transmission

Sun, 13 Nov 2022 01:31:21 +0000

I followed the instructions for the thar-chr7

what else am I missing?

flash link does not have an option for manual transmission

I did not cut the yellow wire

2008 dodge ram 3500 diesel standard transmission

Sun, 06 Nov 2022 01:16:43 +0000

2008 dodge ram 3500 6.7 cummins with a manual transmission, I've installed the evo one with a t harness. The module programs properly, but when I press the lock button 3 times to start the module clicks a few times but does nothing.

no start intermittent

Wed, 01 Sep 2021 15:02:36 +0000

truck will not start with oem key fob. all electrical components non functional in truck. requires disconnecting battery to get truck to function again

Wiring diagram does not match what my truck looks like 2007 silverado 3500 duramax

Sun, 27 Dec 2020 14:58:30 +0000

Can not find the right wiring diagram for my 2007 chevy silverado 3500 duramax. The only one that looks similar is the 2006 evo one standard install. I was told to get the evo one, but cant figure out what wires go where.

I already tried guide #61101 It does not get any further than step 4

Guide #59261 does not match what my wiring harness looks like. Thats the guide it says i should use for my truck.

2020 GMC SIERRA 3500 Diesel

Thu, 24 Dec 2020 12:36:43 +0000

Will the THAR GM 7 work using the guide# 91061 on a 2020 diesel? I'd suppose it's the same wiring and programming of a 1500 just turn on diesel mode maybe?

Does EVO-ONE need a clutch wire for 2014 Ram 3500 diesel manual transmission?

Sun, 20 Dec 2020 04:59:32 +0000

After researching my options for a manual transmission I've determined the EVO-ONE coupled with the THAR-CHR6 was the best configuration for a stand alone system retaining original smart tip key. (Please correct if there is another option) According to another Q&A discussion regarding a RAM 3500 manual diesel, it was mentioned by Antoine Marion that a "clutch switch wire" has to be connected. After referring to Guide # 98581 for the EVO-ONE I did not find any information regarding the clutch switch. Shouldn't this be handled through CAN bus or does it need the clutch wire bonded with an output on the EVO-ONE?

2019 Silverardo 3500 Alarm Questions

Mon, 31 Aug 2020 20:01:35 +0000

Hello I have a 2019 Silverado 3500 diesel and was wondering how to setup the evo all alarm. This is the WT model so it doesn't have the factory alarm enabled. I have the evo all module with the gm7 t-harnes and the remote start works well. I use the oem remote and didn't do any other hard wiring. I'm not sure if I need to hard wire something or if I have something wrong in the settings. My S/N is 001A07 129104

2007 ram 3500 with Python 5706p won’t remote start

Mon, 27 Jan 2020 15:36:02 +0000

5.9 diesel won't remote start. The evo unit red led never illuminates. Did install A since couldn't find start wire any help would be appreciated

2016 ram 3500 manuel evo-one 8 seconde cranking ne fonctionne pas

Tue, 21 Jan 2020 19:06:43 +0000

j'ai tenté a plusieur reprisede configurer , le evo-one pour qu'il crank plus longtemps , parlé deja a une personne au telephone me disant de selectionner le mode 20.5 8 second cranking , mais selectionner ou pas , le crank est d'environ 2 seconde et arrete , parfois 1 sur 5 le moteur parvient a demarrer, comment je fais pour pouvoir avoir au moin 5 seconde de cranking , tout le cablage est ok , le ready go est ok juste la programmation qui bug , comme si meme je change les parametre ca fait rien quoi faire ?

can the evo-one be used as a remote starter in a 2012 ram with manual transmission?

Thu, 26 Dec 2019 19:45:29 +0000

can an evo-one be used for a 2012 ram with manual transmission using 3x lock without using a remote start as well?

2001 Chevy Silverado 3500

Mon, 16 Dec 2019 07:07:12 +0000

On the website it says remote start is only supported for years 2003 and older. Would remote start work on the 2001 using the EVO ONE and the 2003 guide and just hooking up the wires as found on here?

http://www.bulldogsecurity.com/bdnew/vehiclewiringdiagrams.aspx

I also researched about the OBD wire and it appears to be the same.

2006 Dodge Ram 3500 with 5.9L Diesel

Mon, 28 Oct 2019 18:25:14 +0000

What module would I need for a 2006 Dodge Ram 3500 with the 5.9L Cummins Turbo Diesel? Also, does the module have the start delay AND turbo timer?

MUX Data or Ground, Dodge RAM 2007

Fri, 28 Dec 2018 13:53:40 +0000

Hello! From Wirecolor.com - pin 46 MUX Data (Purple/Brown), pin 47 MUX Ground (Purple/Orange) - What the pin should I use? Thank you!

2016 RAM 3500 CANBUS Problem

Sun, 23 Dec 2018 01:20:44 +0000

Today I tried installing the Evo-All to a 2016 Ram 3500 diesel using the T-harness. I made it to step 7 and could not get past that.

In step 7 it says “No key = Red” and “Key in= Red and blue”. Whenever i put the key in, the red and blue will stay on for a few seconds then only the blue will stay on. Is this supposed to happen?

I then put it into the RUN position but it will not flash rapidly. If I put it back into OFF, the blue will go back to solid.I checked the CANBUS wires multiple times and made sure they were at the right spot. I even switched them. In step 8 it says “ignition off= red” and “ignition on= red and blue off”. I dont see a red light after step 7 but the blue does turn off when the ignition is on. One thing I did notice though was that the CAN-HIGH wire Grey/White Pin6 on the guide is a different color on my truck; its sort of a tan color but it is still pin 6. The yellow wire DOES match up. Would this have to do with anything?

I followed the intructions on how to test the CANBUS connection and ignition(https://fortin.ca/en/qa/403/programming-evo-all). The ignition is good but whenever I put it in RUN, the blue light will not flash so im sure its a CANBUS problem i just cannot figure out what it is. I also tried resetting the module and it did not work. I updated it to the latest firmware and even dropped it down to the one it says on the guide but that did not work either. I also tried waiting in between the steps and no luck. Any help is appreciated.

2012 ram 3500 diesel wont start

Thu, 15 Nov 2018 13:00:02 +0000

After install and programming unit, truck wont start. Blue led flashes when lock button is pressed. No red led when dark blue wire is grounded. Yellow led when key is in the ignition and truck is running.

Will the EVO-CHRT6 or EVO-One be compatible with a 2014 MANUAL transmission diesel Ram 3500?

Tue, 16 Oct 2018 23:35:25 +0000

If yes where can I find the setup instructions, what additional devices are needed.

I check the guides for the guides for EVO-CHRT6 or EVO-One. But there was no instructions for the manual setup. Also how can I enable smart phone control on the EVO-CHRT6 or EVO-One?

Thanks