Questions & Answers - Recent questions tagged 3x-lock

Klaxon après démarrage - Santa Fe 2019

Tue, 08 Sep 2020 11:49:53 +0000

Santa Fe 2019 - clé régulière

Après le démarrage de la voiture, que ce soit via l'application evo start 2 ou avec le 3x lock, la voiture émet un son de klaxon, comme quand on appuie 2x sur le bouton pour verrouiller les portes. Est-ce possible de désactiver ce coup de klaxon dérangeant à chaque démarrage de voiture?

Merci

Remote start not working

Mon, 19 Feb 2018 13:56:01 +0000

service number: 002307 237674

checked all wires to diagram and connections all are good.

please help!!

3x times OEM remote start not working - FJ Cruiser

Wed, 24 Jan 2018 22:17:16 +0000

2008 Toyota FJ Cruiser

I have the Evo-One with TOY1 T-Harness and Flash Link Updater. I am unable to get remote start to work. I have triple checked all of the connections. The unit does program correctly. I have enabled option 38.2 for pressing 3x Lock to remote start. I have turned ON option C1 for OEM remote monitoring. And I get no response from anything when pressing the Lock 3 times on the remote. Yellow loop has been cut.

Suggestions?!

EVO-ONE (Connection Mode:Bypass)

Service No: 002B02 213919

Preload date: 43-2017

Hardware version: 2

Firmware version: 79.43

Vehicle: TOYOTA FJ CRUISER 2008 - STANDARD-KEY

EVO-ONE (Connection Mode:Remote Starter)

Service No: 002B07 213919

Preload date: 43-2017

Hardware version: 7

Firmware version: 1.24

FLASH-LINK UPDATER

Service No: 002504 052723

Preload date: 50-2017

Hardware version: 4

Firmware version: 4.03

Turn on OEM Remote 3x Lock feature? 2008 Toyota FJ Cruiser

Wed, 10 Jan 2018 23:01:25 +0000

I have a 2008 Toyota FJ Cruiser

I bought this unit so that I could have remote start using the OEM remote by hitting the Lock 3x.

I have the Evo One with TOY1 T-Harnes. I was able to install with no issues, the unit does program correctly. However, since it did not come with any remotes, I can use the valet switch to get to the different functions, but I cannot change the default setting on Function #38 to allow the 3x Lock press on OEM remote to remote start.

How can I change this? Or how can I program a remote so that I can use it to change the modes?

Thanks in advance!

3x lock vs lock-unlock-lock compatibility

Mon, 16 Jan 2017 15:12:10 +0000

Is the compatibility for 3x lock vs lock-unlock-lock the same - meaning vehicles only on the list for 3x lock will work with either? What limits this ability on cars not compatible?

toyota camry 2014 G-key

Mon, 12 Sep 2016 23:49:02 +0000

Hi! I have just set up the evo all in Camry 2014 se G key. I checked all connection is good. When I turn the ignition on, the yellow led is solid. I also turn on the oem remote option when I program the evo one, but when I press lock unlock lock on my key fob. It does not remote start my car. Is it something I do wrong for the wiring?

2016 Toyota Camry Push to Start Evo-all Install issue

Wed, 15 Jun 2016 14:01:38 +0000

I just finished installing a 2016 Toyota Camry XSE Push to start button Evo-All.

The dome lights no longer work, specifically the top front upper light console where the power moon roof controls are. The moon roof controls work but the dome light does not. Is this something controlled by the
evo-all? Any advice on how to trouble shoot this?

I assume now that it's installed I just hit the included key fob 3x and the engine should start?

I hear noises from the engine and eletronics however after 3x pushes the car does not start.
Where do I start to trouble shoot this?

Thank you

Toyota Camry PUSH-TO-START

Tue, 15 Mar 2016 06:17:56 +0000

I have a 2016 Toyota Camry PUSH-TO-START and the Middle East, there is a difference in the wire tx rx is non-existent

toyota corolla 2015 push to start starts with standalone stater but engine stops after a while and cranks again

Wed, 02 Dec 2015 00:42:16 +0000

i have instaled a stand alone starter using evo all on toyota corolla 2015 push to start

it is programed correctly

when i lock lock lock on oem remote engine starts but stops after a while and then cranks again and stops again after a while

i dont know where i am wrong ?