Questions & Answers - Recent questions tagged atlas

2018 atlas with key, invalid key data. How do I get past this step?

Wed, 14 Dec 2022 22:34:55 +0000

Tried reseting module, and reprogramming 3 times. Appears to program correctly. It has the t harness, and looks like vw6 and vw2 combined.

VW 2019 Atlas Programming/CAN Issue

Sun, 31 Oct 2021 01:15:26 +0000

Recently tried to install EVO One in 2019 Atlas Push to Start. Latest Bypass Firmware Installed.

T-Harness VW6 & TB-VW Installed.

In the Instructions it mentions the CAN BUS is in the Steering Wheel Module Control.
This is a Non-Heated Steering Wheel and does not have the CAN Wires present in the OEM Connector. No Orange/Green or Orange/Brown Wires - Pins 3 and 4

Using WireColor - I have found and connected the Wires to the Driver Door Harness and confirmed the CAN Lines are correct.
Data CAN Bus (High) Orange / Green Steering lock module. 4 pin connector or driver door harness
Data CAN Bus (Low) Orange / Brown Steering lock module. 4 pin connector or driver door harness

During Programming - Step 1 - Released on Blue Light. Step 2 - Connected all Cables. Step 3 - Turn On Ignition. Step 4 - Press and release programming button once and wait for Rapid Flash of Blue Light and it never gets past this Step.

I have confirmed CAN Lines and Transponder Wires.

Just to also confirm - We cant use CAN BUS 2 from the OBD, Correct?

Any other Ideas of programming issue?

SN: 002B04 136811

Thanks

VW Atlas 2019 PTS

Fri, 23 Oct 2020 10:18:39 +0000

I have a 2019 VW Atlas Push to Start. I know a SW Engineer that works at the VW Chattanooga Plant that builds the Atlas and he said there was not differences or updates to the Remote/Keyless system from 2018 to 2019.

Does anyone know if the 2018 setup would work for the 2019? He confirmed all the Connections and pinouts are the same.