Questions & Answers - Recent questions tagged chevrolet-suburban

EVO-ONE + Tahoe/Suburban/Yukon trunk pop

Sun, 28 Dec 2014 12:38:27 +0000

On my 2015 Suburban I have two "trunks" -- one is power rear glass, and one is the whole rear hatch.

My EVO-ONE + RF Kit works fine -- the trunk button on the RF kit remote pops the rear glass. Is there any way to change this to the rear hatch?

EVO-ONE Cannot enter function programming mode

Fri, 26 Dec 2014 17:26:05 +0000

2015 Chevrolet Suburban (Push To Start)

- Bypass install OK

- Decryptor OK

- 3x lock with factory remote OK

Step 1, turn the ignition on, yellow light on EVO-ONE. Step 2 -- hold valet switch until LED flashes. This never happens. The LED never comes on. Valet switch tested fine with DMM.

UPDATE: I can enter function programming mode, if done so quickly (within ~10 seconds) of engine ignition. But if I let the vehicle idle for 30 seconds first, I cannot enter function programming mode, no matter how long I hold down the valet button.

why no t harness for 2006 chevrolet suburban?

Thu, 06 Nov 2014 16:24:54 +0000

For the 2006 year Evo all is the only model to work and why no t harness to make install easier than to splice in wires. If t harness exist for what is the parts list needed for install. 2006 Chevrolet Suburban is the vehicle in question.

Need a wire that grounds when running.

Tue, 02 Sep 2014 02:45:09 +0000

I'm working with a 1999 Chevy Suburban and using the PASSLOCK-SL2 to bypass the onboard security. Using diagram 4 in the installation guide, I have everything spliced in except the Blue Wire (-) While Running. The vehicle does NOT have a remote start or keyless entry system at all. I need to find a wire that grounds while running. Where can I find a wire that grounds while running, or can I tap it in to the ignition wire that has voltage?