/en/qa/tag/compustar-cs800 Powered by Question2Answer /en/qa/23963/2011-corolla-wont-start-with-remote-start-but-will-start-with-g-key install a compustar cs800 along with the fortin key override all with firmware 4.06. &nbsp;everything is hooked up and the fortin program correctly with the 10 blinks. &nbsp;When I try the remote start it will attempt to start the car, I hear the starter crank then it cuts out right before it turns over. &nbsp;When I use the key car turns on just like normal. &nbsp;When I unplug the fortin bypass and use the key it will do the same thing, try to start n cut out before turning over. &nbsp;I believe the fortin is install and program correctly.<br /> <br /> Also before installing the bypass I tried to start it with just the remote start and samething. &nbsp;Car will attempt to start and cut out. &nbsp;Any help would be appericated. &nbsp;I try reprogramming the fortin like 10x already<br /> <br /> &nbsp;<br /> <br /> TIA<br /> <br /> UPDATE<br /> <br /> So there was 2 IGN wire, hooked it up to IGN 1 and now it will work with the key in the IGN, but when I take the key out it will try and crank but wont turn over, I try to reprogram the fortin again but same thing. Toyota /en/qa/23963/2011-corolla-wont-start-with-remote-start-but-will-start-with-g-key Sun, 16 Nov 2014 11:47:05 +0000 /en/qa/23133/2006-honda-ridgeline-evo-all-compustar-800cs-wont-start Hello hooked up evo all and compustar cs800 with data link and with tachless option and unit would start on second attempt all the time.had dealer switch option 2-4 to tach sense as manual recommends this.Now unit wont start.Progamming tach says ok 1 flash but when starting get 3 fashes then one which say vehicle is running or bad tach signal.got proper blue lites when programming evo all. Any idea why vehicle dosent want to start. Stumped please help. Honda /en/qa/23133/2006-honda-ridgeline-evo-all-compustar-800cs-wont-start Tue, 04 Nov 2014 22:41:13 +0000