Questions & Answers - Recent questions tagged control

I bought an evo one, it worked perfectly with the original wear

Wed, 09 Nov 2022 17:25:48 +0000

Hello, I installed my evo one and it worked perfectly, but I know a lot of distance I didn't turn on so I bought the RFK441 kit. I installed it now. My car doesn't turn on either with the control of the kit or with my original key. I disconnected it and set it up again with only the key but it doesn't do anything to

After installing all warning lights came on in the display

Mon, 07 Mar 2022 08:38:06 +0000

After installing and following all instructions and diagrams my dashboard was lit up a christmas tree with all the warning light coming on

cruise control wont engage after evo 1 t harness install ?

Sun, 31 Oct 2021 13:04:05 +0000

cruise control wont engage since evo 1 with t harness istalled ? 20 pin secondary connector pin A4 shows has (-) ignition to clutch relay but gives me a ground when vehicle is running and this wont allow my cruise to engage?

Remote start no heat

Thu, 28 Nov 2019 20:23:20 +0000

Hi,

I just bought an evo-all with fort 3 harness for my 2017 F-150 2.7leb. Remote start works well and I enabled climate control and rear defrost with Forscan, but climate control center is dark and off until I insert the key. Climate control is manual. Tried all settings no luck. What am I missing?

EvoALL to turn on HVAC (Heater/Ac) rear defrost/mirrors on 2013 F150?

Sun, 23 Sep 2018 15:56:31 +0000

Have a Fortin EVO ALL on my 2013 F150.

can it be used to tap into the OEM cabin sensor and allow for the AC and/or heater to be turned on when remote start is activated?

Same thing with rear defrost and mirrors on cold days.

the OEM remote start allows for this. Can the EVO ALL?

if so, how do I proceed?

Joe

2013 wrx removed evo one, climate control and clock are no longer work, related?

Sun, 19 Feb 2017 23:43:28 +0000

Hi,

I have a 2013 WRX US model. I removed my Evo one the other day since I am prepping to sell my car.

I disconnected the wires from d1 and d3 and connected them together to get my door loocks to work again.

Now my climate control or upper clock display do not work. I checked every single fuse on the car and nothing. Is this tied to something else during the install? I put the fortin back together and still no go.

Not sure if it is but was just wondering.

thank you