Questions & Answers - Recent questions tagged cranking

(15 Mazda 3) Car cranks but ignition does not turn on, after steps 1-12

Sun, 08 Jan 2023 18:03:03 +0000

I can get through steps 1-12 (though the security light never displays on the dash), and when the ignition is supposed to turn the car on, the dash lights turn on, I hear a crank, but the car never starts. However, I do get the red and yellow lights flashing, so I tried connecting to the PC to use dcryptor, thinking maybe it will turn on after, but still no luck. Does anyone know what the issue is?

I'm using THAR-MAZ1 with the Evo-All and following guide 62681. Everything is plugged in, and the only wiring done is the Lt blue to Lt blue on the 32 pin connector, and the Lt Blue/Black to the red on the 32 pin connector. Am I missing a connection, perhaps an ignition wire?

Any help will be greatly appreciated. Thank you in advance.

Camry not remote starting

Wed, 07 Dec 2022 10:05:41 +0000

remote starting from key or evo start2 doesn't start the car.

it does turn on the ignition but not cracking up.

lock/unlock, trunk release works from mobile app.

2013 camry push start

Evo one with toy6 harness

Ignition turns on but won’t crank

Sat, 22 Oct 2022 23:22:08 +0000

I just my oem remote and the trucks ignition turns on but it won't start the hood pin is disabled as I don't have one on my truck 2009 f150

Solid yellow and red light

Mon, 20 Dec 2021 17:02:59 +0000

So im installing the evo all with the tb-vw module in a 2008 vw rabbit. ive been fighting with this thing for a few hours now trying to get the thing to read the key so i can use the dcryptor. ive manage to get past the setup 3 diffrent times but each time i end up with a solid yellow and red light when i apply power back to the evo all. when i go to start it, the yellow will go off then the red starts flashing and wont stop till i unplug it. any advice would be great. also ive tried factory resetting, flashing diffrent firmwares and ive now hit the limit on dcryptor and i believe im one flash away from the limit

2016 Tiguan brake and accessories come on but does not turn over, cycles twice.

Thu, 02 Dec 2021 19:16:03 +0000

All lights check out to be correct. Car turns acessories on and applies brake then nothing, then it tries it again and stops for good after that. I have a keywrap right now. Do i the the TB-VW?

Nissan sentra 2013 not starting after 3x lock after programming

Fri, 15 Oct 2021 12:26:35 +0000

I followed guide #33231. Bypass set up was done according to the guide but 3x lock is not starting the vehicle when pressed. The blue led light does flash when lock and unlock is pressed. Is there something that i missed with the remote start options?

Engine doesnt start red light flashes

Thu, 08 Apr 2021 19:27:14 +0000

2014 Honda pilot

2005 ford escape does not crank ?

Sat, 02 Jan 2021 22:16:13 +0000

I installed a EVO ONE with a RF 642w . Everything works locks,unlock,alarm.. When i went to actavate the remote start the parking light comes on as if its going to crank but does not ,parking light flashes 4 times then it try's to start again and fails to crank parking lights flash again 4 times . Then it stops . please help me

Cranked but doesn't start; solid red & yellow light (after it cranked)

Wed, 16 Dec 2020 12:58:52 +0000

Hello,

I've installed Evo-One on Toyota Camry 2014 G Key. After successful programming (installation), when I use OEM 3x lock to start the car, it cranked but failed to star; the unit shows solid RED and Yello clor.

Any hi9nt pleasee?

Thanks,

Qamar

2018 SUBARU PUSH TO START ATTEMTS TO START BUT NO CRANKING

Mon, 14 Dec 2020 11:08:02 +0000

I have installed and programmed the Evo ONE module on 2018 Subaru Outback Push to Start. The module have been programmed and dycrypted when everything is connected, and 3xlock button is pressed on the remote, the car tries to start 2 times, but there is no cracnking sound on the engine. Please help.

I have also tested the voltage from the root wire and the end(connector), on both sides Immo wire puts out 10.9 Volts.

Another thing I have tried to get the voltage reading oin the Yellow(+Starter) Evo Module wire and it is not giving me any readig (0 V), and the main harness WiteGreen(on the green socket Pin34) isn't giving any voltage reading either, is it supposed to be 12V, when the car attempts to start the wire give 12V. any clues?

P.S. When the car tries to start the starte make clicking noise, but the engine won't crank, so basicaly the starter is in a zooming stage.

2018 Subaru Push to Start attemts to start but no cranking

Sat, 12 Dec 2020 14:57:07 +0000

3x times pressed , but no cranking everything else turns on. Lock and unlock no remote start

Mon, 30 Nov 2020 14:37:21 +0000

lock and unlock work good

2014 ram 3500 push gas push to start pressed 3x turns on no crank

Mon, 30 Nov 2020 14:27:51 +0000

lock and unlock work good

no crank after 3 lock presses (blue led each press), red blinks 5x

Fri, 13 Nov 2020 19:14:53 +0000

System quit working after dealer flashed ECM. Updated flash-link and relearned key, but no crank.

Toyota Rav4 2020 Push start doesn't crank.

Sun, 08 Nov 2020 19:48:59 +0000

Installed following instructions. Remote is manufactured 2019.11. Tried various firmwares - from the one recommended in the instructions (79.57), and the newest version (79.64). When plugged in, blue light shines dimmely. When pushing the car-start, the ignition lights come on but doesn't crank -it tries 2 times and turns off.

Does option D1.11 crank the engin constantly for 20s

Mon, 30 Mar 2020 18:36:01 +0000

I have installed the evo-Chart6 into a 2016 Ram 1500 diesel.

When I remote start the truck, it seems to start it for maybe 1 second and than seems to shut off, or maybe stop trying to start, not really sure.

If I turn on option D1.11 Crank 20s, does it keep cranking the engine the entire 20s? or just until engine is running?

Thanks

2011 Ford F150 ignition turns on but does not crank. EVO-ALL flashes red 3 times.

Sat, 22 Feb 2020 15:41:42 +0000

Module flashed and programming work as expected. The ignition turns on but it won't crank. Unit flashes red 3 times.

The remote start works immediately after programming, touching the brake shuts off the engine. However as soon as I use the key in the ignition the pressing lock 3x no longer works.

2013 NISSAN ALTIMA PUSH TO START NOT STARTING

Sun, 03 Nov 2019 19:00:10 +0000

I HAVE A 2013 NISSAN ALTIMA 4 DOOR SEDAN. I INSTALLED THIS WITH A T-HARNESS BUT IT KEPT GIVING ME PROBLEMS. THE PROBLEMS WAS THE CAR WOULD NOT START OR SHUT DOWN WITHOUT REMOTE STARTING THE CAR. SO I HARD WIRED IT AND NOW THE IGNITION COMES ON AND NO START.

SERVICE NUMBER 001A06677653

EvoAll 2019 Toyota Rav 4 FWD Push to start not starting engine

Fri, 01 Nov 2019 18:59:41 +0000

EvoAll Regular installation without takeover. GUIDE # 83841

Programmed Flash-Link4 with latest firmware, and EvoAll updated to latest version as well.

As a first time installer, I've installed this to the best of my abilities. Here are the EXACT steps that i took;

1- (-)start/stop TO EvoAll A19

2- (-)lock TO EvoAll A20

3- (-)unlock TO EvoAll A10

4- EvoAll B4 TO (+)12V ***I didnt, but must I install a 7.5 Amp fuse???***

5- EvoAll B3 TO Ground

6- EvoAll A1 TO (+)Ignition ***I didn't but must I install a 1A Didode???***

7- (-) Steering Lock TO EvoAll D6

8- (~)Can High TO C3

9- (~)Can Low TO C4

After programming the EvoAll, 3xLock will turn on the ignition, then turn off, and make a second attempt to turn on, then off again with no engine crank at all.

AM I MISSING SOMETHING(S)???

2008 Civic will crank,but wont start

Fri, 01 Nov 2019 18:38:49 +0000

My 2008 Honda Civic will just crank,but wont start. The key chip warning light comes on during cranking. i tried doing it with the key in the ignition and still wont start. The car will start and run fine when started with just the key. It seems to have something to do with the chipped key. Any help with this?

2009 toyota highlander hybrid push to start, just start accessories but not crank

Sun, 19 May 2019 23:25:32 +0000

DASH AND ACCESSORIES COME ON AFTER 3X LOCK WITH SOLID RED AND AMBER LED BUT NO CRANK.

intermitten engine crank no start

Mon, 25 Mar 2019 23:22:21 +0000

my girlfriend has a 2017 hyundai santa fe sport with a aftermarket 2 way command start (auto mate) with fortin bypass module. For the last year to year and a half she has been having issues with the vehicle not wanting to start with the command start, the engine cranks but does not start. i sat outside one day and tried starting it with command start, out of 7 attempts it started 3 times. Now this is very intermitten. sometimes it will start the first attempt, other times will not, we brought it to the dealer and they checked it out found nothing wrong with it, it then then tried starting it in front of the service advisor and it did it again, engine crank but no start. They replaced the bypass with a new one, and it worked fine for a few months now its doing it again. could this possibly be an issue with the firmware or is the bypass module maybe sesitive to extreme cold weather? where we live it gets pretty cold -30c and colder.

EVO-ALL GM1 v2. no engine start. 2012 GMC Terrain, red led blink more then 5 times

Tue, 19 Mar 2019 19:42:25 +0000

i did programing, wiring are good i think, my RF remote and ome remote working good with lock and unlock, when i try to remote start blue led blinks 3 times, and red led bkinks more then 5 times acc turn on, door locked but no crank, after some second yellow led comes and quicky goes, i did master reset also, i did programing also, but no success. plz help me im trying to fix remote star from long time, there is 12v also on yellow wire from 20 pin connector when engin running, i tried with Lt.blue/black and Lt blue connected and without it.

ram 2014 tipkey gaz engine engine do not crank enough

Tue, 12 Mar 2019 12:42:24 +0000

some time not always (worst when cold outside)the engine will crank but release before it is running sometime try 2 or 3 time looks like the evo all software do not crank enough that is bad because when you use the key you can hold it to start and the pcm will not over crank but if you relaese to fash it will not start like the evo-all do

Red LED on EVO-ALL but car will not crank. Dash and accessories come on after 3x lock with solid red led but no crank.

Wed, 20 Feb 2019 14:52:02 +0000

I believe programming was successful as the evo blue led flashes blue with remote lock presses. Red led comes on solid but with no engine start. 2016 GMC Terrain

car will not crank

Tue, 06 Nov 2018 12:51:08 +0000

2013 chevy cruze lt automatic.

when pressing lock X3 ignition turns on then turns off without cranking. even with added RF remote will not start.