Questions & Answers - Recent questions tagged dodge-caravan

after install I relized i have 4.18 version and i need 4.06 how can i change it?

Sun, 11 Jan 2015 00:34:02 +0000

how can i get evo all 4.18 version to work on 2004 dodge caravan

Evo-Chr T1 can i use it for 14' Caravan??

Mon, 22 Dec 2014 15:37:41 +0000

I have a old Evo-Chr T1 still in stock and ran out of harness 4's. Is it possible to use this set up in a 14' Caravan? If so, which firmware should it be updated too?

caravan-programming 001A06-360033

Wed, 22 Oct 2014 22:05:50 +0000

I am using the autostart remote starter with the fortin evo all bypass. I have the remote starting working except for programming the bypass. I am using the d2d connector to share data from the autostart to the fortin. Following the instructions of plugging in the 4 wire connector and holding the programming button, i stop at the blue LED. I connect the 20 pin , then the 6 red pin connector. The blue LED then stays on and i turn the igntion switch on. The blue LED goes out and then nothing happens. I have done this many times and the result is the same. The bypass will not learn the skim code as it is described in the instructions .

I am at a loss .

PLease help .

Thanks.

2014 Dodge Grand Caravan - Not Programming

Mon, 08 Sep 2014 14:23:18 +0000

Could you please verify if the 2014 Grand Caravan will actually work with the EVO-ALL as stand alone remote starter? We have done two of the 2012 model last year and it worked great.

We have tried installing it into a 2014 model this weekend and the EVO-ALL will not program at all (when we put the key on ign, the blue led will turn off - no flashing - and it'll turn back on when we pull the key out, thats it).

Triple checked my wiring (i mean there were only about 5 - 6 wires needed to be hooked up into the ignition harness; made sure that the CAN Low and CAN High were right colors and were not reversed) and also tried two different EVO-ALL modules and harnesses The service # of the first EVO-ALL we have used is 001A06 349006 and I could give you the second one if needed

Please assist and verify if it actually is compatible on the 2014 Dodge Grand Caravan. I have set up a time to go into the customer's workplace and try this again today.

Thanks

2010 Caravan not programing

Wed, 30 Apr 2014 21:28:16 +0000

I have a evo-all, im trying to install in my works 2010 Dodge Caravan, I hook it up but it wont program to the van, I have the wiring done correctly, I can start and drive, just wont program to use the Remote Start, I took it to a local installer and had the Evo-All programmed with "Option 15" but when he was in the software, Option 15 was something todo with the Lock and I think 36 was the 3x Remote Start Option, He said they where already on and reflashed it to make sure. But I cant get it to program to the 2010, the Blue light just keeps flashing slowly after I put the van into ON after doing the programing steps.

D

Wed, 29 Jan 2014 21:47:03 +0000

2008 dodge caravan wont start then just honks

Tue, 14 Jan 2014 15:51:52 +0000

I installed evoall with prostart lcpro-1. Connections are correct and sound. When remote button is pushed, lights activate and relays are heard. Then evoall light goes red and van honks. Does not start. has anyone seen this before?

Access to 2012 Grand Caravan Ignition Barrel

Mon, 30 Dec 2013 12:25:00 +0000

Can you provide some direction on how to access the Ignition barrel of a 2012 Dodge Grand Caravan SXT? I lossened (not removed) the lower dash panel below the steering wheel thinking that I would have the access needed. I was not able to access the barrel and did not want to start prying off the small trim panel that is around the barrel where the the key is inserted without first asking for help. Thanks.

i am unable to program the bypass to work with my 2006 dodge caravan

Sun, 15 Dec 2013 18:37:17 +0000

hello i have a fortin evo-all interface module and when i press the programming botton and plug it in the blue light comes on and when i turn the key on all the lights go out and it wont let me program the module. the service # is 001a06 222997 firmware version 4.18 hardware version 6. i was wondering if you could tell me if this is the wrong module or help me in figuring out why it wont program

is their any desired wattage for 1k ohm resistor that will be used in dodge caravan2013 for the harness?

Fri, 13 Dec 2013 12:25:01 +0000

desired wattage for 1k ohm Resistor that will be used for dodge caravan 2013 for the Harness? thanks