/en/qa/tag/dodge-journey-chrt6-fml-rap-interiorlight-doorpin Powered by Question2Answer /en/qa/64663/2015-dodge-journey-interior-light-staying-on Hello, Installed a Autostart as-1780 with Evo-chrt6 into a 2015 dodge journey PTS.  Loaded latest reccomended firmware 74.19.  Installation and programming seemed to be textbook. Followed the troubleshooting steps, I am wired D2D and have the tach and footbrake W2W between the remote start and evo, as well as 12v and ground to the remote starter.  The door locks seem to operate normally with remote start.  The lights on the evo are red and yellow solid while starting. As long as the EVO-ALL is plugged in to D2D cable the interior lights stay on and the warning icon is on instrument cluster indicating a door ajar..  If I disconnect the RAP door trigger wire(pink/black) from the purple(ground while door open) the interior lights go out as normal. Tried the green wire on evo instead of pink/black, made no difference.  Both wires from Evo show ground while vehicle is shut off until basically the battery dies. Dodge /en/qa/64663/2015-dodge-journey-interior-light-staying-on Sun, 22 Nov 2015 06:31:38 +0000