Questions & Answers - Recent questions tagged driver-door

Why is my car starting and stopping and door is always open if module unplugged.

Mon, 26 Dec 2016 13:10:20 +0000

2012 Ford fiesta lots of issues. Starts and shuts down over and over. If module is unplugged driver's door is always open.. headlights staying on when switch is off... This module is being installed by a 30 year certified technician

EVO-ALL driver's door won't lock

Sat, 10 Dec 2016 12:17:47 +0000

HI, please help. I have exact same problem as described here:

https://fortin.ca/en/qa/21843/driver-door-will-not-lock-after-remote-start

except that I installed the remote start (Compustar CM7200 remote starter + DR3100 cellular Drone module + Fortin EVO-ALL immobilizer bypass) on my daughter's 2009 Subaru Impreza sedan. (I'm not a pro installer, just a DiY'er)

The driver's door won't lock. It won't lock when commanded from the Compustar keyfob, it won't re-lock after remote start (I enabled the unlock-start-relock because otherwise the alarm would go off every time when remote started). it won't lock when commanded from the Drone app.

Every time the doors are supposed to lock, all doors lock fine, except the driver's. I hear the driver's door lock locking, and then immediately unlocking.

So, what should I do? Cut wire A10 (it seemed to help the guy with the Kia)? Or wire A20? Or do something else? It has to be fixed, I can't let her leave the car with engine running and unlocked driver's door, especially when the car is out of sight (which was the whole point of going for the Drone)

Please advise. Thank you!

(P.S.) everything else works just fine

EVO-NIST1 - Shuts down if you don't open the door

Sun, 28 Feb 2016 15:50:50 +0000

Hello,

I recently install an EVO-NIST1 on a 2010 Maxima with a Fortin 2-way RF kit. I noticed when testing sitting inside the car, if I remote start the vehicle and press the brake the car will shut off. Pressing the unlock button on the RF remote doesn't seem to help. If I open and close the door the handoff seems to function as intended.

Is it necessary for the EVO to see the door pin signal before it will allow the handoff to the vehicle? Is there a setting I can change? Thanks!

2008 Nissan Altima engine shuts off when door opens

Sun, 24 Jan 2016 14:45:21 +0000

I have just installed the EVO-ALL in my 2008 Nissan Alitima (push to start). All features are working properly, such as door locks, lights, windows, and even the remote start. My only problem is that when the car is running, I unlock the door, open it and the engine shuts off. How do I make it so that my car remains running when I open the door?

2010 Nissan Sentra w/IntelliKey starts with remote start but shuts off when driver door opens

Sat, 02 Jan 2016 17:40:42 +0000

I use the factory remote lock 3x (add on, no additional remotes) and the car starts just fine. The only issue I am having is that when I open the driver door (after using remote or promixity button on handle to unlock), the car shuts off. Do I even need to have this wire connected? Thanks

Driver Door Priority

Wed, 18 Nov 2015 18:02:42 +0000

The factory FOB has 'two stage' door unlocking, meaning first time it's pressed it will unlock only drivers side door, second time it will unlock all of the doors. does the EVO ONE preserve this functionality on a 2015 Subaru Impreza?