Questions & Answers - Recent questions tagged elantra

Hyundai Elantra 2016 Evo-One with Standard Key PATS

Sat, 28 Dec 2024 22:40:04 +0000

Canadian version with the immobilizer and harness THAR-ONE-KHY2

Firmware updated to latest.

Programing process completes. Yellow LED method

Question I have is....

I'm not clear with what the manual means by cutting.

A20/D4 and A10/D6 from the blue PATS ~ wire....

A10, D6 and the blue PATS ~ is tapped into the blue PATS ~

A20 to D4 is connected together...

Did the manual mean I have to use A10/D6 from the blue PATS ~ wire by breaking the connection of the blue wire from the connector

side then connecting it back to the blue PATS ~ using A20/D4 back to the blue PATS~ ?

Is this what I am supposed to do?

2019 Elantra PTS, unable to program CanBus to Evo-One

Mon, 30 Oct 2023 14:14:23 +0000

Installed Evo-One on a 2019 Hyundai Elantra PTS. Verified wiring many times. When it comes to programming the module, all goes well till it’s time to program canbus section. I get it to the point the red led is flashing 5X then pauses. Push the PTS button twice to turn on ignition for canbus programming and nothing. No red led 10x then turning to blue. Any ideas into why this is happening would be great. Can usually get these figured out, but no luck here. Car has 2 different canbus hook ups, one at the obd connector and one behind the fuse panel.

Evo-One vs Evo-All

Sat, 26 Dec 2020 11:46:52 +0000

Hello,

Bear with me, I'm new to this. But I have a 2016 Hyundai Elantra standard key, that I am looking to have a remote starter installed in. I was recommended to this site but I have no idea what the differences in the models are. The two that came up when I searched my car were the EVO-ONE and EVO-ALL so my questions are:

1. They are both able to remote start, so what are the major differences between them?

2. What is a t harness and why would I need one?

Thanks in advance I appreciate the help :)

No foot brake confirmation from EVO ONE or RF antenna when programming RF642W step 4

Sat, 26 Oct 2019 14:48:10 +0000

No foot brake confirmation from EVO ONE or RF antenna when performing step 4 programming RF642W on Hyundai Elantra 2009. Tested foot brake output at 0.02 volts and tapped in to positive foot brake per instructions. Im thinking voltage from car is too low and EVO won't register activated foot brake and this is preventing me from completing programming step 4.

Evostart 2

Mon, 15 Oct 2018 13:17:02 +0000

I just had the EvoStart 2 Module installed on my 2015 Hyundai Elantra GT and the App installed on my Iphone 7... 3 weeks ago.

Sometimes it starts and sometimes it doesn't. When it does start, I don't get any notification that the car has started with the RPM symbol. Anyone know why?