Questions & Answers - Recent questions tagged error

DCRYPTOR LIMIT HAS BEEN REACHED

Fri, 20 Mar 2026 22:41:11 +0000

Hello dear,

I need to reset this module limit EVO-ALL

S/N : 001A07 535399

evo start 2 app keep saying authentification failed

Wed, 25 Feb 2026 18:07:38 +0000

Même en sélectionnant " forgot password" ca me dit que le password temporaire was successfully sent mais je ne recois toujours rien dans mes courriels ( oui j'ai vérifié dans mes indésirables).

J'a changé de téléphone cellulaire il y qq jours et c'est depuis ce temps la que ce ne peux me logger.......

Dcryptor limit has been reached for this car, please reset?

Mon, 15 Sep 2025 01:47:01 +0000

SN: 001A07 694993

I've installed the EVO ALL-LTE w/ THR-VW3 and TB-VW, using guide #65601, on a 2018 VW JETTA (standard key). I've checked the wiring over twice and then begun programing, but there is a problem in step 14 as the yellow LED stays solid, the red LED never turns on and both red and yellow LEDs do not alternate at the end of this step, I've used the TROUBLESHOOTING GUIDES step-by-step guide type tool, with no luck and now i have reached the Dcryptor's limit for this car after having attempted the programing several limes over.

Help please.

Firmware version: 75.[41] Hardware version: 7.0

2013 Prius gets a screen error when trying to program Evo one "P lock malfunction when parking"

Sun, 08 Jun 2025 03:53:07 +0000

P LOCK MALFUNCTION WHEN PARKING, PARK IN FLAT PLACE AND APPLY PARKING BRAKE SECURELY this message appeared at my 2013 Prius when tried to program the Evo one I get to the step where I have to get the solid blue led then connect all the cables then the next step is to pres the start button two times and there is when I get the message also the Evo one module lights go off, I soon I removed the Evo one module and press the start button twice I don't get the message

Evo Start 2 app New Account message email already in use

Sun, 10 Sep 2023 09:28:20 +0000

Installing new Evo Start 2 app with new account on iphone and message saying email already in use. We never used that email for fortin. Please help why is this causing. App installed but account setup is stuck without accepting any email. Thanks for help.

Replay clicks when releasing brake pedal while driving.

Sun, 09 Jul 2023 15:35:38 +0000

2011 manual G37, relay in module clicks everytime brake pedal is released while driving.

DCRYPTOR'S LIMIT HAS BEEN REACHED FOR THIS CAR ON 2020 MAZDA 6

Fri, 02 Jun 2023 06:14:13 +0000

have the OEM remote control then I have the EVO-ONE SN: 002B07 239663, THAR-ONE-MAZ3.

CAN YOU RESET : EVO-ONE SN: 002B07 239663

Please help and thank you.

Dcryptors limit has been reached for this car.

Wed, 19 Apr 2023 20:43:54 +0000

2013 Passat ,service # 001A 06859666

2015 HIGHLANDER CHECK SMART KEY SYSTEM LIGHT

Sun, 04 Dec 2022 20:45:15 +0000

Hello community. Dereck here I am again needing your help, the installation was perfect, the programming was perfect but I'm getting the warning for check smart key system. I've changed battery's in the keys. It is Push to start. I am trying to install an evo all. Thank you very much in advance.

Flash limit reached

Sun, 09 Jan 2022 18:26:49 +0000

The current device cannot be flashed anymore Evo one module sn: 002B04 108567 Flash link 4 vr: 4 firm:4.05 sn:002504 080051

2015 Highlander Check Smart key System light

Sat, 06 Nov 2021 11:29:08 +0000

2015 Highlander Push to start, I'm gettting the warning for check smart key system. I've changed battery's in the keys. Anyone have this issue? Do I need to update my module?

Automatically goes into valet mode while driving

Tue, 26 Oct 2021 13:28:31 +0000

Recently i have noticed that while driving randomly at no precise intervals and regardless of moving or stationary alarm chirps. I found this was the alarm going into valet mode. And regardless if it is already in valet mode it will do it again sometimes minutes later and sometimes 20 minutes later. So far it has never happened right after starting up. The alarm i have is a compustar with the Evo All. Any info or advice is appreciated. Thank you for your time.

Why my evo all activate my check engine light on my chrysler 200 2015?

Mon, 03 May 2021 07:57:31 +0000

After few minutes running check engine light came on and says the codes are unknown. Codes are for Mitsubishi Mirage.

Software Incompatibility with Remote Function Actuation

Sun, 14 Mar 2021 16:45:43 +0000

I have installed the EVO-ONE-942 with THAR-ONE-MAZ3 on my 2016 Mazda CX5 Automatic Push Start, and when scanning the vehicle with Thinkcar I get a DTC in EPS module, code U0338:00-08 (Software incompatibility with remote function actuation).

After clearing all code, it comes back again ...

Also, I've noticed the trunk open on the remote opens it half way, meaning it still cannot be actually opened until you unlock the car. Is there a way to disable trunk open as it doesn't work right?

Another weirs "issue" I found, when the car is unlocked with Fortin remote, then locked with "OEM" remote, when you check status with Fortin remote, it will say unlocked even though it's locked. Then when you lock with Fortin remote, it will report the status correctly.

Dcryptor has reached it's limit - issues with EVO-ALL on Audi A3 2018

Sat, 26 Dec 2020 19:47:07 +0000

I'm troubleshooting my install on my Audi A3 and unfortunately i've reached my limit on Dcryptor for this car. C'mon.

This is already frustrating and now I can't continue troubleshooting because i'm stone walled at the dcryptor step.

SN: 001A07 125999

Please reset ASAP - now i'm sitting with no car until Monday and today is Saturday! So frustrating.

JEEP patriot 2008 2.4 4*4 Fortin EVO-All +CHRT5 error p0513 in memory

Tue, 15 Dec 2020 05:19:57 +0000

Good day!
JEEP Patriot 2008 2.4 connected Fortin EVO-ALL via CHRT5.
Everything works as it should, the only moment that confuses and I want to solve this problem is that it gives error p0513 in the memory of the car. This happens when, after autostart, insert the key into the ignition switch, turn it to the "on" position and press the brake pedal. It turns out that when the control is transferred to the standard immobilizer in the key, the signal is lost and gives an error, but does not light the lamp.
The key is programmed.
After updating the firmware of the unit, I reset it to factory settings. It seems that I did everything according to the instructions.
What could it be?
Sorry for my english-gogl translation.

Blinking amber light on start button 2016 CX-5

Sat, 12 Dec 2020 18:34:55 +0000

The module seems to work fine, I have completed every step in the installation guide. However, the start button does continuously blink amber/orange while the vehicle is running and does not stop until the engine is shut down. This only happens when started normally, not remotely. If I disconnect power to the EVO ONE, the car can be started just fine and there is no blinking light. I used the THAR MAZ 3 t-harness to install. I have been scouring the Mazda forums and have found no answer. Everyone says either replace the fob batteries (I replaced them) or visit the dealer. The mazda dealer wanted $150 to diagnose the problem, and then doesn't want to even look at it after learning the Fortin system was installed.

P0513 code 2005 Chrysler 300c Evo All Stand Alone Connection F Everything Working.

Tue, 17 Nov 2020 22:26:03 +0000

It's like a false/positive situation. I had someone overpress my rf remote and oem key was starting car on one lock. blah blah blah

Reprogrammed both sets of keys (2 oem's and 2 RF RM411 long range one way remotes). Everything works fine again, but if I use the one button RF RM411 I get the code thrown and a little red security light stays on for a couple of seconds once my key is in on position in ignition.

Now if I just use the OEM key, I don't get the red light. Also there is no engine light with code. The only reason I know it's there is I had the car seafoamed (should have done through break booster after MAF, used intake manifold. Had engine lights galore and ended up changing all 16 spark plugs myself (the good ones) and clearing misfire and crankshaft sensor codes.

Anyways, all is working great now, except this code I can't seem to clear in any way. Is this an issue with my car or Chrysler products?

Usually when you have this code, the car will start but quit soon after.

Just let me know and I will just leave it alone and not worry about it.

Dcryptor has reached it's limit

Sun, 09 Aug 2020 11:43:04 +0000

I am trying to wire the Evo All remote start myself on my 2012 Volkswagen Jetta. I have completed all the wiring and successfully remote started the vehicle using the OEM remote. However, I am struggling to get my Compustar T9 remote to communicate to my Evo All. Two questions:

First- can my Dcryptor limit please be reset? SN: 002504064234

Second- I opened the options and found the supported RF kits section and saw the option for FT D100. I read that the FT D100 is necessary for the Compustar RF kit to communicate with the Evo All. Do I need to buy this part in order for the Compustar RF kit to work with the Evo All?

Thank you for the assistance.

Flash Limit reached

Sat, 25 Apr 2020 13:25:50 +0000

I just bought an evo-all with a GMt1 T-Harness. Upon connecting it to my computer, I get an error saying flash limit reached 0/0. The Service Number is 001A06 242453. Can this be reset?

Dcryptor's Limit has been reached for this car.

Sun, 23 Feb 2020 18:32:22 +0000

Just reinstalled a new remote starter for my friend using evo-all bypass module.

The car is Nissan 2011 Quest PTS. I got the message said "Dcryptor's Limit has been reached for this car." when I went to the dcryptor step. Then the installation was interrupted. This case is my second case. The first one I had to buy a new one to replace it.

Can anyone give me some help?

SN:001A06 854069

Log into use GingerLimited modethe descriptor step×

Getting brake on error with evo all and compustar cm900.

Sat, 22 Feb 2020 23:30:32 +0000

I installed a compustar cm920 with a Evo all using datalink cable on a 2019 kia Sorrento key start vehicle and it will work fine but randomly not start using remote start and I get an error code from the parking lights saying foot brake on. This is strange because it's all thru data and it will only happen once every 10 times or so. I have a options A1-A11, C1, F2 on.

The vehicle does NOT have an immobilizer. Programmed using just the blue light for CAN and programming went fine.

Not sure what would cause this.

Dcryptor's limit

Sat, 01 Feb 2020 17:48:00 +0000

I have went through all the steps firdt time the valet feature wouldnt let me start the car, went through the motions per instruction wouldnt click on brake press, 2nd time went through all steps, valet sets went perfect, and pressed the lock button three times and nothing happened, lights wouldnt blink with the press of the key lock feature on the remote. 3rd time went trough set up instructions and i get the limit reached on the key dcryptor step. please help with this.

Installed EVO ALL on 2015 Infiniti Q50 and got a check engine light

Fri, 10 Jan 2020 23:10:24 +0000

Hello,

I installed the EVO-ALL NIST4 standalone remote start on my 2015 Infiniti Q50 and it works/starts up fine, but there is a check engine light. The code reads P0463 Fuel tank level sensor - high input. The check engine light turns on when I use the remote start and when I start the car regularly with push to start.

Can anyone help me fix this, please? Thank you.

DCRYPTOR's LIMIT HAS BEEN RECHED=EVO RS EVO-AUDT1

Sun, 29 Dec 2019 16:23:11 +0000

Error , Dcryptor's limit has reached for this car, please reset for me,

SERVICE NO# 001A06 905492

Thank you

What cause the vehicle not to start or not turn off?

Thu, 26 Dec 2019 20:46:47 +0000

Vehicle was fitted with Fortin Evo-All THAR NIS4(includes THarness) with RF-ALL. 11 months later, the vehicle will not start and will not turn off with "Smart Key error" and "Key not found". Vehicle towed to the dealership and determined that the remote starter was causing the ground and preventing the car to start. Issue was resolve by disconnecting the remote starter. Should I try to reconnect again and risk of repeating the no start issue?

After decrypt my check engine and airbag light is on.

Mon, 29 Apr 2019 19:31:22 +0000

All wires are hooked up right the remote start and oem alarm works great. I have done different options multiple times to no avail. Everything else works good just check engine and airbag lights are on. I have the fortin evo all. Car is a 2014 Fiat 500L

DCRYPTORs LIMIT has been reached for this car

Thu, 28 Feb 2019 20:07:02 +0000

how do i get this to reset havent even used my remote start

Has my immobilizer been damaged/reset?

Sun, 17 Feb 2019 12:41:45 +0000

I have an EVO-ALL and EVO-NIST1 T-harness. I integrated the harness into my car with all necessary t-connections and soldered connections in place. When I attempted to follow the programming procedure, at step 7, I was only getting a solid blue LED. I re-attempted the procedure, same result. I started the car afterwards (with EVO-ALL disconnected), and my security light is now on solid red, indicating an immobilizer malfunction. I have tried leaving the battery disconnected (for at least 15 minutes), I left the car sit overnight (battery connected, another user here had a similar issue and it resolved itself overnight), and the light is still on when the car is started. If I pull the battery from either of my keys and attempt to start it by holding it near the start button, the car will give a "NO KEY" message.

What went wrong and how can I fix it? Currently I'm concerned that the device caused permanent damage to my car.

2016 Chrysler 200 and Evo-All - Early Shutdown and "Service Keyless System" Error

Mon, 11 Feb 2019 10:27:14 +0000

I installed the Evo-All with the T-Harness into my 2016 Chrysler 200 (push-to-start) over the weekend. I did flash the unit beforehand with the options as indicated in the instruction manual and updated the software. I did NOT connect the MUX wire to the parking lights, as I am not interested in the parking light functionality.

Programming and key decryption went entirely according to the book, and the vehicle remote-started immediately upon the initial test without difficulty. I have also integrated a Crimestopper Teleconnect into this installation, and the smartphone app starts the vehicle, shuts it off, and lock and unlocks the doors as expected.

However, I have a few issues and I'm hoping for some insight into remedying them:

1) The electronic driver display in the vehicle reads "Service Keyless System" immediately after the vehicle starts. This error clears after a few seconds, but remains resident in the vehicle's memory. This happens upon each start.

2) The vehicle runs for five minutes and then shuts off. The options flashed to the Evo-All call for it to run for 15 minutes.

3) Attempts to re-start it are successful, but will run it for three minutes before it shuts off.

Obviously, I messed something up. Your insights are appreciated.

My EVO One doesnt program

Sun, 30 Dec 2018 00:58:22 +0000

SO i bought the kit for the plug and play for remote start for my 2015 rav4 along with the T Harness. everything is installed correctly. I am running on the 79.49 bypass and 1.24 on the remote starter. it doesnt seem like it wants to go into the programming mode. i have held the buttion so the red and blue light stood soild than i plug in all the wires as followed by the instructions. it blinks 9 times and pause. i turn the ignition on but nothing happens please help.

Evo-All on 2014 Nissan rogue causing check engine and 4WD error lights

Tue, 13 Nov 2018 20:31:18 +0000

It is a 2014 Nissan Rogue with the flip key. Installed using guide 75221 back in March of this year. Install was done by soldering. There was no issues during install, and no issues programming the module. I remote started the vehicle for 5 cycles before customer picked it up. No error lights. Customer called last week (8 months later) and said the check engine light came on, and the 4WD error light came on. They took it to the Nissan Dealership and they said the remote start is causing the issue because it was installed incorrectly. #1 I have done this exact install over a dozen times this past year and no one else has has an issue. #2 why would all of a sudden after 8 months it suddenly cause an issue? #3 is it possible there is a lag in the CAN Bus that is causing the error similar to some of the Chryslers where I need to change the firmware? #4 Why would this install be done 13 times on 14-18 Rogues and only this one have an issue?