Questions & Answers - Recent questions tagged evo-all-

How do I get my power mirrors to close when using the lock function on my RF912 Remote Transmitter?

Sun, 15 Dec 2024 21:32:24 +0000

Vehicle is a 2018 Audi Q5 with Push Start

OEM remote closes the power side mirrors when locked.

I have the EVO-AUDT2 and RF912 2-way transmitter

Please reset EVO ALL, cant be flashed anymore

Wed, 01 May 2024 17:55:23 +0000

Evo all reset.

Sn: 001A07 071150

Date- 09/2019

Evo all flashed to many times

Fri, 12 Jan 2024 15:54:28 +0000

Evo all flashed to many times need reset. SN: 001A06123517

Evo all flashed to many times please reset

Thu, 11 Jan 2024 19:54:25 +0000

Evo all flashed to many times please reset. SN: 001A07504881

Please reset Evo all, can’t be flashed anymore

Thu, 04 Jan 2024 23:03:46 +0000

Evo All

Sn 001A06 424808

Date 11/2014

Sn 001A07 480927

Date 03/2023

Please reset Evo all, can’t be flashed anymore

Fri, 29 Jul 2022 17:57:50 +0000

Evo all reset.

Sn: 001A06691980

Date 12/2016

THE CURRENT DEVICE CANNOT BE FLASHED ANYMORE

Wed, 27 Apr 2022 03:30:57 +0000

I am trying to figure out why the remote start will not start the Toyota Avalon 2018 any more.

When i tried to reprogram the vehicle the message is that the Dcryptor has reached its limit.

sn:001A07286854

you had to hit the unlock button to relase the programming. Thank you.

EVO-ALL thar-toy13 harness connections all in do i need to leave any disconnected?

Sat, 24 Apr 2021 22:26:00 +0000

wont start and no led indications whatsoever on module when key fob button pushed 3times .

Any experienced with EVO-ALL thar-toy13 harness connections ,all plugs in do i need to leave any disconnected?

2019 ford f150 won't start

Mon, 22 Mar 2021 03:02:45 +0000

Hi, installed evo all with t harness stand alone and it programmed fine, but it won't start the blue light on evo all blinks blue with 1st and 2nd press but not on 3rd press. Is there a way to activate the evo all to make sure it's programmed right, is there a wire i can ground to activate it? Does option b2 need to be on to add evo all single button one way rf kit ? Does protocol have to be set to fortin or is it automatically set to fortin? SN 001A07011080

Заблокировался мой EVO-ALL

Mon, 01 Mar 2021 16:35:55 +0000

Good evening! blocked my EVO-ALL serial number 001A06165529 firmware 79.05. Going through the dcryptor tab, the limit is exceeded. I ask for help in solving the problem. Thank you.

Evo all - Toyota Camry hybrid 2013 push to start

Thu, 21 Jan 2021 18:43:54 +0000

I press the key three times to close it, the red lamp blinks 4 times, the car won't start, what's the problem?

I tried to install firmware 79.41, after pressing the close button on the standard key, the side panel lights up, but the car does not start. the red and yellow indicator on the fortin module is on.

EVO ALL stand alone won't program to my 2019 Ford Explorer

Wed, 13 Jan 2021 21:38:52 +0000

2019 Ford Explorer Base key start, no hood pin, auto trans

I can get the CAN bus to program(I get the proper lights) Can bus voltages checked at 5 pin connector.

key on. Key off

CAN 2 HIGH 2.76V. 2.08V

CAN 2 LOW. 2.24V. 2.08V

CAN 1 HIGH. 2.72V. 0V

CAN 1 LOW. 2.27V. 0V

Firmware is 71.49 as flash link suggests Toggle switch instead of hood pin has good, verified ground EVO ALL won't program my key information. I have gone through the steps prescribed(old method) with putting key in ignition, wait 6 seconds, then putting second key in for 3 seconds. Ignition comes on, but stays on. No blue LED flashing and have to unplug module to turn off. Also tried new method of folding the key in, and placing in front of the ignition, then pressing button on EVO ALL, but nothing happens. Blue and red LEDs stay lit. I am at my wits end. I have been searching all over this forum for the answer, but here I am asking the question. I am not sure which harness I have, but there is a t harness that goes to the ignition barrel, and the 4 CAN hi/lo wires that I stripped wrapped and spliced, and are on the correct wires behind the OBD2 connector. Car was bought new in 2019 with 2 factory keys..

invald key data and now device can no longer be flashed

Sat, 09 Jan 2021 14:43:18 +0000

I've tried many times to progam the key to it and never worked but not locked out device can no longer be programed...

it will lock the doors and turn on the gauges but won't start the truck

s/n 001A07 195436

will not program 2013 f150

Wed, 20 May 2020 14:43:52 +0000

2013 F150 using EVOFORT4. While trying to program,when I get to putting the 1st key back in the 2nd time, nothing happens. Red and blue lights stay on. When I turn the key off, the IGN stays on until I unplug the red plug from the Evoall. Any help would be greatly appreciated.

Date: 10/2019

SN:001A07 082676

firmware 71.49(flashlink recommended. PDF says 71.50, but it is grayed out in the firmware list).

Does option D1.11 crank the engin constantly for 20s

Mon, 30 Mar 2020 18:36:01 +0000

I have installed the evo-Chart6 into a 2016 Ram 1500 diesel.

When I remote start the truck, it seems to start it for maybe 1 second and than seems to shut off, or maybe stop trying to start, not really sure.

If I turn on option D1.11 Crank 20s, does it keep cranking the engine the entire 20s? or just until engine is running?

Thanks

How do I get my parking lights to turn on when remote started? Vehicle is a 2013 Infiniti jx35

Mon, 16 Mar 2020 08:21:28 +0000

How do I get my parking lights to turn on when remote started? Is it just a matter of enabling that option in the flashlink manager or is there other wiring modification involved? Vehicle is a 2013 Infiniti jx35 using an Evo all with t-harness.

2014 durango evo all. T harness stand alone is programmed but wont start.

Sun, 08 Dec 2019 23:42:01 +0000

Connected ignition wire to the red green wire in driver side kicker panel as shown in install video. All lights on evo all work when hitting lock 3xs.

can t program

Sat, 23 Nov 2019 14:38:36 +0000

i have a 2007 ram 1500 i installed evo-all and the t harness connected the yellow wires together the purple and green with red stripe together my connector on the left of colum with black connector only has 4 wires so it says to use diagram c which i did .the lights cycle as per instruction but it gets stuck on solid blue light.i installed the lates software what am i missing

EVO-ALL in 2004 Jeep Liberty will not program

Sat, 09 Nov 2019 08:33:47 +0000

2004 Jeep Liberty, no factory alarm, with transponder key. EVO-ALL is installed with a Compustar CS800-S. Used installation guide #3317, Connection #1, Program #1. Firmware flashed is 74.[38].

I can get the bypass to enter program mode (solid blue LED). When turning the ignition key to ON, the blue LED turns off and nothing else happens. The guide says the LEDs are supposed to turn on and off BLUE - RED - YELLOW in sequence, taking up to one minute. I waited 5 minutes with no lights turning on. Any advice?

Evo all will not start Honda crosstour 2013

Sat, 19 Oct 2019 14:24:02 +0000

installed evo-all using t harness in 2013 honda crosstour pts. programming and decryptor worked perfectly. rerinstalled in veh and followed instructions. unit lights blue when lock/unlock button is pushed on key fob. 3x lock option did not work. reconfig unit to lock/unlock/lock. also did not work. unit lights up red then blue after attempt to remote start. yellow light does not come on like i have seen in how to and demo videos. i noticed in the wire color install instructions that the description does not mention the use of the t harness with the evo all only with the evo one. could this be an issue?

Toyota Hihglander 2017 Push to Start +evo ALL not working

Tue, 01 Oct 2019 07:52:52 +0000

2017 Toyota Highlander+ evo all

system not working ,connection 200% correct ,try two diffrent evo all ( hardware 6 )

program mode ok but no reaction to lock/unlock ,try with rf kit -no ignition

something wrong??

Am I able to do the Stand Alone Installation w/ T-harness for the 2015 Toyota Camry Hybrid Push to Start.

Mon, 09 Sep 2019 21:45:15 +0000

It only shows the camry hybrid up to 2014 for this installation but I already have the harness

2013 Ford Focus EVO-All will not program

Sun, 31 Mar 2019 16:47:07 +0000

Trying to get this Focus to start. Using EVO-ALL with remote starter module. No T-harness. Tried both the 2 key and 1 key Dcryptor and still getting no key detected when attepmting to remote start. 2 key method dosent seem to want to complete past step 8. Ignition does come on but Red LED does not flash, Blue one flashes 20 times and then ignition turns off. Using Dcryptor, 1 key, completed on computer with flashlink successfully but not key detected message when attempting remote start. Double checked all connections: good. Double check EVO programming, D2 is off. can't figure this one out. Please help

Ford Focus 2015 Evo All with T harness power issue

Wed, 06 Mar 2019 22:38:55 +0000

Advice for all. Do not use the power (datalink) connection from the T harness. It will cause the 5A ignition hold fuse to blow. Run a separate power and ground to the data link cable instead. The manual does warn to do this if parking lights exceed 5 amp - and on a stock car from my experience they do...

why do I need a Flashlink just to toggle the D1 option. with an Evo-all + harness T.

Sat, 05 Jan 2019 20:56:37 +0000

Using evo all as a stand alone remote starter with oem 3x lock option. Why do I need to purchase a flashlink to make it work. D1 option should be be defaulted to on not off. 2007 Ram using install guide C.

Evo-All doesn't program

Sun, 15 Oct 2017 13:15:46 +0000

2006 Silverado 1500. The evo all will go to blue led but when ignition is on, blue goes out and red does not come on. Verified connection of the purple/yellow to purple on OBDII. Using data link with crimestopper RS4.