/en/qa/tag/evo-all-mazda-cx5 Powered by Question2Answer /en/qa/67933/2016-mazda-cx-5-evo-mazt1-programmed-but-does-not-start We have a 2016 Mazda CX-5 GT w/Tech.<br /> <br /> I&#039;ve programmed, reset, and re-programmed the module 3 times now. Hardware v6; the firmware has been updated to the latest as of today (71.34 I believe). The device is set to OEM remote standalone remote starter, 3x lock remote start, 15 minute run.<br /> <br /> It&#039;s installed and has been programmed following the instructions, #35221 Connection 1 (REMOTE CAR STARTER ONLY - DOORLOCK BY OEM REMOTE). All of the LEDs on the device match the output described in the instructions after every step except for the very end of the instructions where the red/yellow LEDs alternately blink. I pull the power on the EVO-ALL and then re-plug and all LEDs are dark until remote input.<br /> <br /> When I step away from the car (doors shut and locked) the blue LED does light up on each lock press. After three I see the EVO-ALL execute the following LED pattern: Red, long Yellow, Red, long Yellow, then three quick Red blinks. The car does not atempt to start and nothing lights up. The security indicator in the instrument cluster continues to blink. It will continue this pattern every time it sees three lock signals.<br /> <br /> When starting the car traditionally, the Yellow LED stays lit. I&#039;ve read all of the posts here and elsewhere that I can find and I&#039;m not sure what I&#039;ve missed. Mazda /en/qa/67933/2016-mazda-cx-5-evo-mazt1-programmed-but-does-not-start Sun, 24 Jan 2016 19:46:32 +0000 /en/qa/65797/probleme-sur-cx5-2016-pas-dallumage Bonjour,<br /> <br /> Sur Mazda CX5 2016, avec EVO MAZT1, firmware 71.31, &nbsp;&nbsp;001A06 557035<br /> <br /> Le module est correctement programmé, le CAN également mais rien ne fonctionne. Il n&#039;y a pas d&#039;allumage. Lorsque j&#039;essai un démarrage, led rouge, ensuite led jaune, (pas d&#039;allumage ni de demarrage, dash reste noir) ensuite parking light flash 9 fois.<br /> <br /> Jai fais le shéma d&#039;installation 2 du guide #35241, avec Nano Start.<br /> <br /> J&#039;ai activer le mode stand alone à cause de mon problème.<br /> <br /> Suis-je mieu de faire le shéma d&#039;installation pour programmation à une clef #57291 ?<br /> <br /> P.S. Ol n&#039;y a pas de sortie négative sur le fil white black pour le push to start...<br /> <br /> Need help ! :(<br /> <br /> Merci Mazda /en/qa/65797/probleme-sur-cx5-2016-pas-dallumage Wed, 09 Dec 2015 04:12:50 +0000