Questions & Answers - Recent questions tagged evo-chrt5

How temporary disable EVO-ALL Remote Start

Tue, 11 Apr 2023 10:21:52 +0000

Hi, I'm considering to install EVO-ALL resp. EVO-CHRT5 to my Jeep Wrangler JK 2018 to get Remote Start possibility by the standard FOB.

My question, which options do I have to temporary disable the Remote Start function by FOB when I have to bring my car to a Jeep shop for an extended inspection? During the inspection, the Remote Start function by the FOB have to be disabled, after the inspection I'd like to reactivate the Remote Start function easy.

Which options do I have with the EVO-CHRT5?

Thanks

2008 Jeep Patriot Evo-Alll slow flashing blue light

Tue, 14 Sep 2021 22:25:59 +0000

Here is what I have:

2008 Jeep Patriot Automatic Transmission, EVO-ALL, ProStart CT4311-TW, Jeep Patriot T-Harness.
After programming evo-all, it only slow- flashes Blue LED.

CT-4311 is connected D2D to evo all.

Yellow ignition wire from CT-4311 connected to Evo-All yellow ignition wire connected to yellow t-harness wire.

purple Mux wire connected to evo all.

CT4311 park lights wire wired to Jeep parking lights (white/purple)

when 3 lock press on factory remote.....nothing, slow flashing blue light.

when lock button on CT4311 remote pressed, CT-4311 clicks, no lock, park lights flash 1 time

when unlock button on CT4311 remote pressed, CT-411 clicks, no unlock, park lights flash 2 times

when start button pressed, ignition comes on, dash lights up, no start, no crank. Repeats 2 more times.

any suggestions?

I am thinking there must be something in the settings/options of EVO-All. I have the programmer and software. I just selected the "default" options when flashing.

thanks

Mike

JEEP patriot 2008 2.4 4*4 Fortin EVO-All +CHRT5 error p0513 in memory

Tue, 15 Dec 2020 05:19:57 +0000

Good day!
JEEP Patriot 2008 2.4 connected Fortin EVO-ALL via CHRT5.
Everything works as it should, the only moment that confuses and I want to solve this problem is that it gives error p0513 in the memory of the car. This happens when, after autostart, insert the key into the ignition switch, turn it to the "on" position and press the brake pedal. It turns out that when the control is transferred to the standard immobilizer in the key, the signal is lost and gives an error, but does not light the lamp.
The key is programmed.
After updating the firmware of the unit, I reset it to factory settings. It seems that I did everything according to the instructions.
What could it be?
Sorry for my english-gogl translation.

my 07 dodge caliber will not start?

Fri, 13 Mar 2020 11:44:58 +0000

i have the chrt5 using connection C. firm ware is up to date D1 and C1 are selected. doubble checked all wiring. i can watch the evo lights go through the function modes but car does not start. So the weird part is it worked 4 times when i first installed it. not sure whats going on. car will start with key so i know its still getting power.

No Work, Program the EVO but do nothing the 2010 Jeep Patriot vehicle

Sun, 27 Oct 2019 12:49:22 +0000

hello install the evo RS, in a Jeep Patriot program but do nothing the car to turn on connect only the yellow cable you have to make another connection ?????

EVO-Chrt5 connected to Crimestopper RS7-G5 via DataLink

Sat, 06 Jul 2019 17:23:16 +0000

Already have a successful install of the Evo-Chrt5 (option C) and programmed oem key (3x lock)...vehicle starts fine. Now I'm integrating the Crimestopper RS7-G5 unit (via DataLink) and was wondering if there's any tested true and tried specific diagram-flowchart manual for these two units anywhere...or somebody on here can help point me towards the right path. Thank you for time and consideration in advance.

2007 Dodge Dakota Evo CHRT5 hood don't trigger alarm

Sat, 18 May 2019 04:05:46 +0000

How do I need to program Evo All or connect the t-harness so the alarm sound when my hood is open

Do you have a wire diagram to connect a Viper 5806V and Fortin EVO-CHRT5 together?

Tue, 26 Mar 2019 18:54:57 +0000

I am getting ready to install a Viper 5806V and Fortin EVO-CHRT5 together in a 2015 Jeep Wrangler JK and am curious on some of the wiring for connecting the two. So do you have a wire diagram to connect a Viper 5806V and Fortin EVO-CHRT5 together for this vehicle?

Will the EVO CHRT5 work on a 2014 Dodge Grand Caravan?

Fri, 15 Feb 2019 21:08:49 +0000

I bought a EVO-CHRT5 from amazon (package is not here yet.) but just realized that it may not be the correct one for my 2014 DODGE GRAND CARAVAN when I was searching around on this site.

EVO-CHRT5 For Jeep Patriot 2008 I have factory fob, do I have to buy a separate remote starter or RFkit to make it work?

Tue, 22 Jan 2019 06:56:02 +0000

Hello all pro! Hi there, I bought EVO-CHRT5 (T-harness Included) for my Jeep Patriot 2008, my question is, do I have to buy a separate remote starter to be able to make it work? Im looking at the T-harness stand alone installation ( connection ) would this be the right connection for my Jeep? Yes my Jeep has a factory remote fob, but my problem looking at the stand alone wiring diagram is that one connector belong from T-harness ( black, 4 pin w/black and red blue white ) went to RF kit remote starter. do i have to buy this RF kit? can i just go along without making up this RF kit connection? And lastly the A2 and A3 from 20 pin EVO module which is the lock/unlock and the A13 start/stop, I bleieve this is an input which supposed to be connected from the vehicle lock/unlock door out put. but the A13 start/stop of 20 pin EVO ALL module where would this be connected from the vehicle? Also Im aware about the update and programming procedure I do have the the flash link updater im gonna be okay with that, Im just really confuse if i do have to buy a separate remote starter or RF kit to make my command start work. I hope someone can enlighten me Thank You so much !

how do i find the immobilizer on a 2006 jeep commander

Sun, 09 Dec 2018 12:55:34 +0000

i am going crazy trying to find the immobilizer on my 2006 jeep commander . ive read the manual and instructions but there is hardly any space back there. i cant find anything that looks like an immobilizer and there is hardly any space behind the key cylinder. how do you get in there to mess with the wires.? the space is insanely small or my hands are huge.

I read i need to connect the yellow wire to yellow wire. i did that.

but the other 4 wires do i just use a t-tap to connect them to the wire at the ignition harness?

white/red - Orange Brown 72

Green/Red - Purple /Brown 46

Yellow/Red - Pink/Green 54

Blue/White - battery 12 v ( pictures shows connecting to kick pannel istead of Blue/red in ignition harness)

None of the videos of installation online show anybody connecting any of the wires in the 20 pic connector.

also, the instructions in the pdf show using the 12v battery wire nearthe kick panel instead in the 12v battery wire that is in the ignition harness(blue/Red)

Help me please!

CHRT5 '09 Jeep Liberty turns off in 10mins of less after remote start active

Thu, 06 Dec 2018 19:16:58 +0000

CHRT5 remote start. Purchased and programmed by factory Fortin Dealer Mobile Accessories in Scotia, NY USA warmcarnow.com. August 26th 2018 Installed by me following youtube video instructions early September 2018

Lock x3 on factory key. Installed into 2009 Jeep Liberty. Automatic trans.
Has been working as it should up until about 2 weeks ago.

The Jeep starts up fine, then in less than 10 minutes of idle time shuts off by itself while parked and no-one has touched the pedal or ignition, entered the vehicle, or touched the buttons on the fob.

Does not start

Tue, 30 Oct 2018 11:28:10 +0000

It sends out a signal and the fuel pump kicks on but nothing past that

Recent EVO-ALL firmware does not work on 07 Grand Cherokee.

Mon, 17 Sep 2018 22:21:43 +0000

I've recently upgraded my remote start system in my 07 Grand Cherokee. What I had was and Autopage remote start unit with and EVO-ALL using 74.08 firmware. All functions worked on that system. I decided to upgrade to a new Compustar CMS7200 unit while keeping the EVO-ALL. During installation, I wanted to check which options I could set in the EVO-ALL using the flash link updater. When I hooked it up, it told me that new firmware is available and 74.35 was recommended. I upgraded the firmware and set the options and tested it out. Everything worked except the remote start. The vehicle would start and run for about 3 seconds and then shutdown. Knowing that my previous system didn't do this, I downgraded back to 74.08 which worked fine. I ended up going between several versions of firmware trying to get the later versions to work. I tried 74.34, then 74.22 and both shutdown the remote start immediately. I also tried 74.14 which worked. During this process, I was trying to troubleshoot the unlock-lock before remote start, so i downgraded to 74.12 noting how 74.14 made the relock faster after unlock before remote start. After this, it told me my unit can't be flashed anymore. So why doesn't the newer firmware work? And can you unlock my EVO-ALL so that I can manage the options in it?

Went to start 2017 Jeep Wrangler 3X Lock and Alarm went off.

Sat, 25 Aug 2018 22:55:17 +0000

Updated firmware and now when I cycle key and solid blue to flashing blue, when I hit the lock button all colors of the led flash and nothing works. The unit had been working for the last 14months with no issue.

RF642W and evo-all Remote start blinks red

Sun, 08 Jul 2018 15:44:57 +0000

I installed the Evo-chrt5 on my 2015 Jeep wrangler. I have no power doors so i ordered a 642w RF kit. The remote start works perfectly but the remote doesnt flash with a green light, instead it blinks blue then one red blink. Just wondering why. The directions say it is supposed to blink green twice. Also the status request doesnt work.

EVO-CHRT5 2011 Liberty security light blinks after remote starting and while driving

Fri, 08 Jun 2018 23:57:05 +0000

i bought the EVO-CHRT5 for jeep liberty 2011, the unit works fine but one thing is worring me, the security light in gauge cluster keeps blinking after remote start is done and the unit light is orange in the middle , it keeps blinking while driving too and it's annoying

did i do something wrong during installaition?

Can I temporarily remove a EVO-CHRT5 by only unplugging it from the harnesses?

Mon, 14 May 2018 20:41:13 +0000

I installed a EVO-CHRT5 in my Jeep Wrangler and just realized it the programming needs to be changed to accept an RF kit. Someone has offered to change the programming for me so I don't have to purchase the flash link but can I unhook the unit and send it to them but leave my wiring in place and still drive the jeep? I am assuming I will need to remove all of the wiring but just want to verify.

2017 wrangler no blinking when turn key

Sat, 24 Feb 2018 15:17:13 +0000

Hi I have a 2017 Wrangler and i connected the t harnes,hold button,plug black ,wait for solid blue, plug everithing else and when I turn the key it wont blink, try it 3 times and nothing,do i supoced to cut a wire or ist a problem with the unit, i got the evo chrt5, o and i have an alarm

thanks

Stand alone remote start function not working 2015 Jeep Wrangler

Tue, 30 Jan 2018 20:03:54 +0000

EVO CHRT5. connected yellow wires. Did not connect purple wire. Flashed module to recommended firmware 74-32. followed instructions, Moduled flashed blue, flashed rapidly etc. Blue light turned off when hit factory remote lock button. But car will not start when pressing lock three times. Nothing lights up on the dash. I notice the factory red LED is flashing on the dash for the factory alarm the entire time but not sure that means anything. The Options selected are all A1 to A11 ON, C1, D1, D1.1, D1.2, D1.6, D2 all ON. Everything else is set to OFF. I have reset the module, flashed it again, confirmed options, etc several times. No luck. Any idea what is wrong?

will evo one not work on 07 dodge dakota with 1 key?

Sun, 21 Jan 2018 11:33:45 +0000

i cant seem to get it to work on my 07 dodge dakota. the instructions are not real clear on programming but the remote start will turn the ignition on but wont engage the starter. i can turn the truck on with the key and take the key out and it will continue to run until i turn it off with remote start. when i turn the key to ignition the yellow light on the evo chrt5 comes on and stays on untill truck is turned off. any help is appreciated.

How can I add siren and proximity/shock to my evo all

Sat, 06 Jan 2018 17:28:23 +0000

I’ve searched the support section, I have read guide 16221. I want to add a siren with warning chirp and alarm siren and proximity/shock sensor to my Jeep Wrangler using evo only. Please advise Parts needed, preferably Fortin brand. And how to do it. 16221 as well as the install instructions for my CHRT5. Please help, anyone in NC I will come to you for help.

fortin evo chrt5 can i use aftermarket key fob

Fri, 05 Jan 2018 13:23:09 +0000

can i use an aftermarket key fob for the fortin evo chrt5-- my oem key is NOT a keyless entry, my jeep has an after,market kit

2014 wrangler with aftermarket keyless entry- use those remotes?

Thu, 04 Jan 2018 13:06:35 +0000

I have the electric life 95338 (https://www.electric-life.com/product/95338-4-door-power-door-lock-kit-w-keyless-entry ) since my jeep came with manual locks.. will the Fortin Evo chrt5 work with those remotes? I do not have a factory keyfob

2014 Wrangler Does Everything But Start

Tue, 02 Jan 2018 13:06:43 +0000

I believe I have done everything correct but when I try to start the blue light flashes each of the 3 times I hit the lock button but the jeep doesn't start . What am I missing ?

Dose 2017 Jeep Wrangler need to have keyless entry to have remote start

Sat, 16 Dec 2017 00:36:13 +0000

I have 2017 Jeep Wrangler with standard key do I need to have keyless entry to have remote start

Why won't my chrt5 program to mt fob?

Fri, 17 Nov 2017 15:59:56 +0000

Isn't the chrt5 supposed to be pre-prammed? The red, amber and blue lights cycle continuously. The blue light never goes solid blue even though I've held the button while plugging in the black plug for several minutes and retried several times.

I've tried it with the key not in the ignition. I've tried it with the key in the ignition. I've tried it with the key off. I've tried it with the key on.

The only way I didn't try it was with the vehicle started.

I purchased this device because it was supposed to be specific to Chrysler, Dodge and Jeep and pre-programmed.

If I don't receive a quick response, the item is being returned.

What 1 button 2 way rf kits are available? Omega echo 1?

Thu, 16 Nov 2017 09:22:54 +0000

Will Omega echo 1 rf kit work with Evo all. If not, what other 1 button 2 way kits are there that don't require any additional parts?

arm disarm wires

Wed, 15 Nov 2017 08:47:48 +0000

at Evo All connection B A2 and A3 want's in (-) wire but from my standalone remote starter I have (+) signal.

Do I need to connect those arm and disarm wires?

thank you

EVO CHRT5 compatible with 2016 Jeep Wrangler CRD?

Tue, 05 Sep 2017 14:31:22 +0000

Will EVO CHRT5 work with 2016 Jeep Wrangler Sahara CRD (2.8 diesel automatic)?

Also - will they work with the jeep keyless 4 button as well?

Jeep Commander not starting.

Sun, 09 Apr 2017 22:28:30 +0000

I was able to program the device, when i go to start the vehicle doing 3x lock button, it makes a sound but it will not crank. Just makes a noise like when the key is in the on position. Noticed diagram says to add a hood pin. Will this prevent the device from working?

I am using a standalone config.

Thanks, any help is greatly appreciated.

I think I figured it out

Mon, 06 Feb 2017 03:55:24 +0000

A friend told me that to complete the installation process you need 2 car keys. If that's true I only got one key when I bought my truck used. The jackass dealership couldn't find the other key, so they said. Very BAD experience when I purchased this truck. I am not going to open up that can of shit. SOOO, I went online and order a key for my truck should get it in two weeks.need an extra key anyway. Let me know if I am right, to solve my problem

evo-all dodge Dakota Brake disarm not working & security light on dashboard not going out

Fri, 03 Feb 2017 08:48:51 +0000

As I turn the key to the on position an hit the brake the remote start is still on and the security light is still on.well I tried leaving the key on and pushed the start button then the remote starter shuts off and the security light too. I know it's not supposed too work that way. On the installation A chart it doesn't show installing the brake wire or parking light.

2014 Jeep Wrangler, Evo Chrt5 with T-Harness will not remote start, all light blinking

Thu, 26 Jan 2017 08:27:35 +0000

I recently installed an Evo CHRT5 with T-Harness into my 2014 Jeep Wrangler (2dr), the remote start functioned properly the first couple times I tried it. Now it will not remote start, when I looked at the unit all three lights were blinking one at a time. I've unhooked everything and went through the reinstall process multiple times but every time I do this it will only function for a few days/remote starts. Then it goes back to cycling through the lights and not remote starting.

Will the evo-chrt5 need to be updated with firmware when received

Tue, 27 Dec 2016 12:59:36 +0000

Rececently bought the evo chrt5 for my 07 jeep grand Cherokee. Connected the yellow wire from the t-harness to the yellow on the 20 pin connector, and the purple from the t-harness to the green/red on the 20 pin, installed the unit correctly to the immobilizer, went through the light sequence and synced the OEM key by hitting lock x1 when blue flashes. Pressing lock 3 times will not start the vehicle. And I do get the yellow light when the key is in run position.

No LED lights on EVO ALL CHRT5 with program button pressed 2016 Wrangler

Sun, 25 Dec 2016 13:11:45 +0000

I'm trying to install this unit but when I get to the step where you hold the program button and connect the black 4 pin connector the LEDs do not turn on. If I release the button then all LEDs blink rapidly. Could this be a faulty unit or need to be reprogrammed?

2005 Durango Ignition kicks on, but the vehicle doesnt start

Sat, 10 Dec 2016 19:53:24 +0000

2005 Durango Ignition kicks on, but the vehicle doesnt start. I have followed all connections showed on teh diagram, but still nothing.

My EVO-ALL CHRT-5 will not detect on Remote-Starter mode on flashlink manager2 but will detect on Bypass mode?

Wed, 30 Nov 2016 18:09:17 +0000

While programming a CHRT-5 for a Dodge Caliber 2010 I can not toggle to Remote-Starter without the EVO-ALL disconnecting and all 3 LED's flashing at the same time for about 20 seconds. Then nothing. I can toggle back into Bypass mode and the EVO ALL comes back on. I am able to program it in Bypass mode but I would like to change the horn chirps etc in Remote-Starter mode. About a month ago I programmed another CHRT-5 for a Jeep Wrangler and was able to toggle between Remote-Starter and Bypass.

Brake kill not working

Wed, 05 Oct 2016 16:31:38 +0000

Evo-All, CHR5 T-Harness, Crimestopper RS7-G5, 2007 Jeep Patriot Limited (4x4) 2.4L w/ automatic transmission.

Remote start works, as does lock/unlock, from ALL REMOTES (2 factory key/remotes and Crimestoper remotes). The brake kill without the key in and turned is not working. I literally drove the vehicle around the block with NO keys even I the vehicle.

Also, key take-over not working. If remote started, and key put in and turned to run, 2-way remote still chirping and showing that the run time timer is still going.

Does below zero temps affect evo-chrt5

Sun, 14 Feb 2016 13:56:37 +0000

I have a evo-chrt5 installed on my Jeep Liberty. The temps have dropped below zero and the key fob would not work, Had to unlock door with key and alarm constantly sounds. Corrected itself once I removed evo-chrt5

Does the EVO-CHRT5 work with the Drone DR3400?

Tue, 26 Jan 2016 21:33:00 +0000

I have the EVO-CHRT5 remote starter installed on my 2015 Jeep Wrangler Unlimited. I want to add the Drone DR3400 to it so I can start the car from anywhere and keep an eye on the door locks and such when I have the top off. Is this compatable?

2015 Jeep Wrangler - Starts for one sec, then shuts itself off. Tried grounding GWR - Jeep freaked out...

Fri, 22 Jan 2016 21:41:08 +0000

Here are the specifics:

Vehicle: 2015 Jeep Wrangler w/ OEM Alarm

Unit: Fortin EVO-CHRT5 w/ Flash Link

Programming: Everything is set to off, with the exception of C1 - Send Lock/Unlock, D1 - Stand Alone Remote Starter, D1.6 - 15min runtime, D2 - Unlock Before / Lock After to diasble OEM Alarm

Symptoms: Unit installed per instruction set C (stand alone). Press lock 3 times triggers start, engine turns over, starts and immediatly shuts off. Saw from another Q/A that I should try connecting the GWR (Ground while running) wire. Tried this and all of the electronics went haywire when trying to start (radio, dash lights, etc.). I'm now stuck - not sure what to try next.

How to make vehicles parking lights turn on with Chrt5?

Mon, 14 Dec 2015 13:23:27 +0000

I have a CHRT5 system on my 2008 Dodge 1500. Everything works great (starts, stops, security features work) but I cannot get the parking lights to come on when the vehicle is running. I know it says the white and green wire, but it doesn't say from whih plug to take it from since there are multiple greens and white wires. Just need to know where I connect the wires from and to. Thank you very much

06 Dodge Cummins Options

Thu, 03 Dec 2015 12:06:52 +0000

I have an 06 Dodge Cummins Automatic, I have been searching for options for a remote start and ran across a kit that includes: “Crimestopper DS4 Remote Start & Keyless Entry, EVO-Series Bypass w/ Plug-In T-Harness”, Manufacturer Part Numbers: DSPRO4 + EVOCHR5+QC4(D) (2492-4). Will this work or am I barking up the wrong tree? Sorry I’ve been confused with the EVO-ALL, EVO-ONE, and EVO Series stuff. What should I do for this to work properly? Thank you

so i removed my evo chrt5 form my dodge avger

Sun, 29 Nov 2015 12:53:36 +0000

do i now have to get my key re programed car will not turn over

2012 dodge avenger shuts off when using ignition to start

Sun, 29 Nov 2015 09:15:45 +0000

just installed a evo chrt5 on a 2012 dodge avenger car starts with key 3x lock but when i use the key to start the car shut down all most instintley . it is installed as a stand alone remote start .

RF Kit Stops Working after Arm/lock

Sat, 28 Nov 2015 14:05:20 +0000

2015 Jeep Wrangler, EVO-ALL, Compustar RF-2W704-SH 2-Way RF Kit with FT-D100. The remotes that come with the RF kit are working but they stop working after I have locked or armed the system. I cannot get them to respond and do anything until I unlock the doors with the factory remote. It's seems that once the doors are locked, the car stops listening to any input through the aftermarket remotes. If I want to use remote start for cold morning, I have to lock the doors on the jeep manually the night before.

2006 Dodge Diesel After remote starting and driving doors auto lock after turning ignition off.

Thu, 24 Sep 2015 12:00:12 +0000

If you remote start the truck it will relock when you shut it off. That includes after you drive it. For example, if I start the truck with the key fob it will unlock the doors, start the engine and relock the doors. Then I go outside and unlock the doors with the fob. I get in the truck, insert my key and drive to my buddies. Turn the key off, engine dies, I jump out but leave my key in the ignition or cup holder. About 10-15 seconds later the doors will lock again. Now I'm locked out of the truck. How to a stop this from happening?

2006 Chrysler 300 srt8 stand alone install

Thu, 10 Sep 2015 00:26:09 +0000

When installing do I need a relay or resistor? I have followed your instructions per the manual. The device has been updated and program to my car. I have both yellow cables from the 20 pin and t-harness connected to each other parking lights connected to the headlight switch and start/stop to the ignition harness. When I click lock 3x all electrical lights up but the car never cranks or turns on. Is that because I need the resistor and relay? Or is my wiring connected wrong? Please help

thanks

Optional Accessory Options - EVO-ALL CHRT5 (Jeep Wrangler)

Sat, 11 Jul 2015 01:30:44 +0000

Vehicle: 2015 Jeep Wrangler

Alarm: No factory alarm, EVO-ALL configured for remost start with Alarm.

Installation Type: Diagram C (https://fortin.ca/download/28831/evo-all_thar-chr5_(t-harness).rev-20150216.pdf)

I have the EVO-ALL programmed and working using the instructions for diagram C at the above referenced guide. However, I want to add siren/horn, and dual stage proximity or shock sensor but there are no wiring diagrams to do this. Is it possible in the configuration I have?

Is the parking light output (-) or (+) on my vehicle?