Questions & Answers - Recent questions tagged failed

Got stuck in step 5 on chrt6 for 2017 journey

Wed, 03 Apr 2019 23:19:43 +0000

Ok i made all can high, can low connection on the diagnositic plug an the ignition to the white and pink wire (tested with multimeter) and i cant get the yellow light to red in key programming, are the light blue and light blue and black wires that connect from a10 and a20 to tharness requiered?

2017 Dodge Journey with EVO CHRT6 install not working

Sun, 05 Nov 2017 18:31:46 +0000

Devive: EVO CHRT6 included

EVO ALL Service # 001A06220014

HW: 6

FW: 4.18 Updated to 7.32 via Flashlink updater2 Manager version 3.62

Tried to install into 2017 Dodge Journey push start button.

Followed guide# 12211 Rev 20160914 stand alone

connector A:

A1 Yellow to Pink/white (Starter wire)

A10 Blue to Lt Blue /Black T-Harness

A18 Green/Red to Parking light White/Brown

A20 Light Blue to Lt Blue T-Harness

A8 Hood Pin . . Not connect yet

A15 Pink/Black . . Not connect yet. Too hard to reach ( Is this caused Problem ? )

Connector C:

C4 Gray/Black to CAN LOW

C5 Gray to CAN HIGHT

Follow Programming on page 5/9 of the installation guide . .

On step 6 with the key fob without battery placed close to start/Stop button. Press start/Stop button twice as required but the button light Not change to ACC or ON the Ignition at all. Also the yellow light on the remote Starter not change at all.

I tried to reprogramming from step 1 down again and sitll got the same issue on step 6

Repeat again with key fob battery placed on at step 6, the light Start/Stop button changed from OFF to ON ignition, But the yellow light from remote starter not change . . .

Would you please look thru and Help me to solve this programming issue.

Thank you,

Minh Le

Can't Buy Token

Sun, 22 May 2016 12:40:42 +0000

Hello,

I can't seem to buy a token. I have tried numerous times using my debit card and each time I get an email saying the transaction was unsuccessful. I have verified that card information is correct along with the billing info and it still fails. I also tried PayPal and after checking out it takes me back to wire color without a token, just sends me through the "subscription" page again. Note, on the PayPal checkout i get no verification that the transaction has succeeded or failed.

All I want to do is buy a couple tokens for a remote starter challenger install. Any help resolving this problem would be appreciated.