Questions & Answers - Recent questions tagged flash-link-manager

Keep Me Logged In

Fri, 06 Feb 2026 16:08:31 +0000

Hello. Recently, to log in to the manager, I always need to enter my email and password... Whether I click Yes or No... Why is this happening?..

Can't login to Flashlink Manager

Sat, 06 Dec 2025 22:13:54 +0000

I tried logging on to the FlashLink Manager using the universal account and password

Account: flash@mypushcart.com

Password: MPCflash

But it keeps saying account doesn't exist or password is incorrect.

How do I login?

The evo all options in flashlink manager do not change

Wed, 05 Nov 2025 07:32:17 +0000

There is an evo all (s/n 001A06 756559). It doesn't update through flashlink manager (because it's older than 5 years). But why can't I change the options in the firmware version currently installed in the module (I can't change any options in the program)?

Replacement of functions

Tue, 22 Jul 2025 09:51:33 +0000

Hello. A Volkswagen Jetta came. I wanted to change the autostart combination with the OEM remote control... They turned on the function - raising the windows with a long press on the remote control. And at this time the car starts. But the module was released in 2018 and I could not change this function. And how can you even look at the rest of the functions on such a module?

My Evo One will not flash during the flash link process

Sun, 13 Jul 2025 21:07:04 +0000

My Evo one is not flashing (doesnt even say I reached my flash limit, it just refuses to flash) when I choose my setting and my car specifics during the flashlink manager process (before decryption ofc). Not too sure if it needs another reset, as the last one I asked for didnt fully reset, my car settings were still shown. Any help is appreciated at this point, thank you. SN: 002B04 267246.

Why won't Flashlink manager let me flash after selecting the features of my car?

Mon, 07 Jul 2025 15:36:32 +0000

After getting my evo-one reseted, I continued to reinstall remote start, however after clicking my vehicle preferences on flashlink manager it does not allow me to flash, its like it loads a little bit and then crashes and continues to guide me back onto the same screen. Any advice?

Evo all/gmt4 module not connected/detected in flash manager

Thu, 13 Feb 2025 09:23:42 +0000

Evo all/gmt4 module not connected/detected in flash manager 4. It will recognize the flashlink2, i can upgrade the firmware, but the evoall/gmt4 unit is never recognized. I have a solid red light on the flash updater and a solid red light on the evo all in bypass mode, switch to remote start and the evo all has all the leds blinking a few times and it doesnt connect. when I shut down the program and restart it, the program recogognizes the updater plugged in but there is no firmware selected.

Update the firmware again and it accepts, and then every thing is the same as above. it seems like everything is communicating with the evoall flashing, but can never get unit connected throught the software. Is the module bad, servers down, bad flash tool? I tried a reset on the module again but same as above.

Unable to Connect Module to Flashlink Updater

Sat, 08 Feb 2025 23:15:29 +0000

In Flashlink Manager, I am able to connect the Flashlink Updater (red LED on device solid and status shows "Connected"), but when I plug the Updater into my EVO-ONE the module will not connect to the Updater.

Using Flashlink Manager v4.62, and Flashlink Updater has firmware v4.08.

where I can find an older version of FlashLink Updater / Manager ? v3 or v2

Tue, 03 Dec 2024 08:44:25 +0000

where I can find an older version of FlashLink Updater / Manager ? v3 or v2?

Please advise

Thanks

Module not compatible with flashlink

Mon, 08 Jul 2024 17:29:44 +0000

I have purchased a EVO-ALL Module and When trying to connect to program it says module is not compatible. Can this be added to the database if not already there?

Flashlink has firmware version: 4.51-1.1.15

Module is 10/2021 SN:001A07 304791

Flashlink Manager won't recognize Evo-One Module

Tue, 07 Nov 2023 19:51:29 +0000

Just purchased a flashlink 4 updater. Downloaded the software but it won't detect that the evo-one is plugged in.

Updater is on latest software.

Module wont connect in FlashLink manager

Sun, 06 Nov 2022 14:04:21 +0000

When i connect my FlashLink Lite into the USB port it connects and LED becomes solid red. So that is working. When connectin the 4pin to the EVO-ALL module it is saying in FlashLink manager that the module is not connected. However, the module is slow blinking blue so it atleast has power to the unit. Im running windows 10. And i already tried reinstalling bot the manager software and the driver software.

2019 Nissan Versa Note RF Kit Programming Option for flashlink manager

Sun, 18 Sep 2022 20:47:18 +0000

Hi there,

I am trying to get my RFK912 remotes to work on my nissan versa note but i don't know what option to choose in the Flashlink mannger. Everytime i go to look at the options flashlink manager advices me that wizard mode isnt avibaile for my vechile of choice and and tells me to go to the pro mode. In the pro mode i don't see an option to choose the kinda of anttenta that i have.

Evo one doesn’t connect to flashlink manager 4 (lapto app) flashing red, yellow and blue

Fri, 29 Jul 2022 17:12:00 +0000

Evo one doesn’t connect to flashlink manager 4 (lapto app) flash red, yellow and blue, stop en red and again flashing, stop en red and after that said error, contact customer support

Sn: 002B04246642
date. 12/2021

Flashlink updater 4 with viper

Thu, 20 Jan 2022 16:22:35 +0000

I have a Flashlink 4 Updater running current firmwear. I am trying to program an evo all module. When I am going through the steps in the Flashlink Manager and get to protocall Viper isnt an option. Can I not use an evo all with a viper 4806v?

page cannot be displayed when selecting Remote Start option on Flashlink Manager

Sat, 01 Jan 2022 17:46:44 +0000

Cannot Access Remote starter (Online Mode) option On Flashlink Manager. Keep getting "Page Not Found" with no other text on the page.

I can However access Remote Start (Offline Mode) By selecting Configuration--Special Unit--Unit Options.

Is There a Server Issue? is Anyone else havng this problem?

why can't I edit my evo all options

Sun, 25 Apr 2021 16:33:40 +0000

ok 2012 ford foucus issues with Flasher tool even unistalled and reinstalled either wisard or pro mode I can't well It won't let me .says at Flash limit .I pesonally think WTF we bought the device and the Flaser that gives yoiu acces I dont care if its 100x If why I cant is due to Fortin limit locking well someone needs to think that one real fast consumer affairs and I;m positive this isn,t part of the deal upon purchase .

had no problem before wirh remote start edit options as I wanted to use the newly evo alarm to enable chirp and enable siren not horn ..

and I would like to add one more comment the few times I have called Fortin tech suppport I sure can tell the level of service given to the stupid consumer installers why do I know this well guess a small world I have a friend whom is a pro install and listened in on his coverstion wow A DISCRACE

Flashlink Manager not detecting EVO-ONE

Sun, 07 Mar 2021 09:12:23 +0000

When I connect my EVO-ONE to my flashlink it stays stuck at 10% Currently Fetching Options.

It refuses to connect. I am able to get connected in PRO mode. Bypass works fine in PRO Mode, but the remote starter tab crashes the connection.

Is my device defective or is there a fix for this? I am using the latest version of Flashlink as well as the latest firmware on my evo one.

Thank you

Evo One not seeing RM411

Wed, 10 Feb 2021 10:55:24 +0000

Trying to install RM411 to increase range on Evo One from simple 3x OEM.

Bypass works and car starts on OEM 3x.

Never had an RF kit on this EvoOne before. Plugged in, blue light flashed on. Entered Programming mode using Valet button. Remote LED starts flashing. I press and hold RM411 remote for about 10-12 seconds as per instruction. Remote goes from Solid, to Flashing, to off, back to SOlid Blue and then I release. Antenna stops flashing as per instructions to identify that its learned the remote. I turn off ignition. Still does not work.

Tried resetting Remote Start using programming mode and 23 valet button pushes method. Put Evo One back on flasher and reset remote start options for car (tachless and disable alarm). Still nothing from the remote.

ALSO - I can not enter programming mode using the remote. Turning Ignition on, off, on does not give me a solid blue antenna LED to then hit brake 4x and program remote that way. Not sure of that's helpful to know.

Please advise. I don't have another Evo One in stock to try right now.

EVO-ONE - install myCar in existing install with RFkit

Thu, 21 Jan 2021 11:25:09 +0000

Have existing EVO-ONE with RFK422. Want to install MyCar.

What needs to be selected under flahslink manager ? Currently "RF Kit compitible" has Fortin 2 selected.

Flashlink manager EVO-ONE - missing RFKit programming option

Thu, 21 Jan 2021 11:22:09 +0000

When connected EVOONE to flashlink manager; Do not see "RF kit compitible" menu under "REMOTE STARTER" tab.

Any reason its not visible?

Flashlink manager software prorgram user guide PDF

Thu, 21 Jan 2021 11:16:36 +0000

is there any pdf version of software user/manual for flashlink manager ?

will be good to ahve pdf document decribing menu etc....

Unable to update error message

Fri, 15 Jan 2021 21:16:25 +0000

Have an EVO ALL (date 9/2020 on back) and the Flash-Link-4 marked with Hardware Vr 4 , Firmware Vr 4.03 on the back. When I plug it into computer (Windows 10) with downloaded Flashlink Software, I get the following message:

An error has occured with the previous update. Please set firmware version to update the. (nothing after the)

Then it reads:

No update is available at this moment for the . (again nothing after the).

In the help menu of the program, I tried the Software Update - it says I have the newest version. I tried the FlashLink Firmware Update option - nothing happens.

Now what?

Thanks!

EVO-One not detected after fully programmed and working.

Wed, 13 Jan 2021 08:30:46 +0000

Hello,

I have the EVO-One w/ THAR-ONE-SUB1 T-Harness and Fortin RF642W remotes on a 2016 Subaru Legacy.

Everything works including remote start but I would like to get back into the module via Flashlkink Manager and change some settings that are not available via the Valet Switch programming method. (Specially, I would like to increase run time of remote start)

The problem is the flashlink manger does not detect the module. The procedure I've been doing is:

1) Open Manager

2) Connect Flashlink updater via USB, it is recognized and updated to latest version.

3) Turn key to ON, but not running.

4) Connect Flashlink updater to cable plugged into module. (All other connectors also still connected)

5) Retry detection, open close program etc... but is never detected.

Is there something I need to do with the programming button perhaps? Or need to remove the other connectors? I didn't want to do anything with the programming button fearing it would lose its decyptor settings or other programming.

The module is secured well and I ran the flashlink cable to my fuse box for easy access, but if I have to remove it I will.

Flashlink4 vs Flashlink updater 2

Mon, 04 Jan 2021 11:03:42 +0000

There few variation of firmware update interface usb cab/module kit.

what is the difference between Flashlink Updater 2 vs Flashlink 4?

if these are not same what is the advantage of Flashink 4 (assuming its a newer model)?

Which System setup do I choose when flashing my EVO-ALL

Wed, 30 Dec 2020 10:03:02 +0000

I have a 2016 Mazda 6 Automatic Push-to-start. My products I'm installing are EVO-ALL remote start, THAR-MAZ1 harness and 2 Fortin RF642W keys. Which system setup do I choose?

1. Standalone remote starter only

2. Standalone remote starter and EVO-alarm system

3. EVO-alarm system only

4. aftermarket remote starter only

5. aftermarket remote starter and aftermarket system

6. aftermarket alarm system only

Flashlink not being detected in Manager

Fri, 25 Dec 2020 11:52:47 +0000

Hello I recently bought an evo-one for my 2019 kia soul standard key, I downloaded the updated Flashlink manger software and cannot connect to program. I get a message status:not connected for both Flash-link-updater and module.

I get a solid red light on updater when i plug it in and have tried multiple usb cables just to be sure and no lights on the Evo-one.

If I go ahead and click flash-link-firmware update the red led stays lit and the green also lights and stays on

Fashlink-4 module Service number 002504040498

Evo One SN;002804136757

EVo-One not detected by the flashlink updater

Thu, 11 Jun 2020 21:39:00 +0000

I have got the Evo-One for my 2019 Mazda CX-9. The module has been programmed. The module is not detected by the manager after I unplugged from the vehicle and decryptor again. It stops at 10% when fetching options every time. What did I do wrong? Please help!

Flashlink not being detected in Manager

Sat, 29 Feb 2020 20:10:23 +0000

Flashlink Manager not detecting my device. Im on windows 10 and No drivers pop up to be updated.

Flashlink manager won't detect device?

Thu, 09 Jan 2020 20:52:21 +0000

Everything hooked up properly, vehicle key info pulled, slow blue flash, plug it into my comp and nothing happens. Just says the PC is unable to detect the flashlink updater through USB port.

limite de flash atteinte

Fri, 09 Nov 2018 11:58:25 +0000

Je passe mon evo all de mon audi a5 a mon nouveau audi q5. Le module de programmation me dit limite de flash atteinte. Qu est ce que cela veux dire. est-ce qu'on peut le debloquer

Merci

Luc Ostiguy

Flash-Link Updater is only detected by FlashLink Manager in FLU mode?

Sun, 14 Oct 2018 14:02:01 +0000

Software: FlashLink Manager 4.36; Windows 10 Pro x64 version 1809

Hardware: Flash-Link Updater Ver.4, firmware 4.03

FlashLink Manager will not detect my Updater, unless I attempt to initiate a firmware update. Following that process, the firmware update gets stuck at 1%, so nothing happens. Canceling the update just puts me back to square one, with FL Manager stating that it is unable to detect the FL Updater.

The red power light is on, indicating proper power, and I have tried multiple USB ports and cables, even different computers. The Updater driver was installed correctly, and "FES FlashLink Device" appears in my Device Manager with no warnings.

The fact that the unit is detected when I try to update the firmware gives me hope that it is not defective, so can someone show me what I'm missing?

Thanks!

Jeep Commander EVO-One

Sun, 01 Apr 2018 23:52:47 +0000

Dear sir

I bought EVO-One and Flash-Link Manager, Not sure I've modified the setting or not.

my Jeep Commander and EVO-One never work.

anyone who can tell me the setting item by item on flash-link manager?

OEM key fob not working while 2017 Rav4 is remote started

Fri, 29 Dec 2017 22:05:51 +0000

I hooked up my Evo-One for remote start only (using my OEM key fob, 3x lock button) on my 2017 Toyota Rav4 H-hey and it starts up fine but it will not allow me to unlock my vehicle once it is remote started. All of my wires are hooked up correctly, per guide #58371 & I have the C1 & D2 turned on as well as the A2 off under bypass programming and 38.2 selected under the auto-start programming. I assume it is a programming issue, something is either on that isn't supposed to be or I have something off that isn't supposed to be. The TPMS wire is also cut and not touching and the Lt.Blue "data door lock" wire is hooked up correctly. Help please.

Remote start does not work on Altima 2012

Wed, 25 Jan 2017 10:55:04 +0000

I'm having a strange issue with my EVO-NIS1 remote starter, I initially installed the kit without connecting the parking light wire, the remote starter worked well for 2 days. I woke up in the morning and the car battery was dead, I jumped the car but the remote starter stopped working, I checked the wiring and everything seemed fine, i reprogrammed the EVO with the flash link and reconnected the wires and did the programming as I did initially. The problem that I faced is not seeing any red or blue lights, It got stuck at the steady yellow (step 4). the car still works fine but without the remote starter which is still installed, the only time the remote start worked is when i was in the car already. I went back to connect the parking light and tried to program it again but i still got stuck at the steady yellow light. I don't know what to do to get passed step 4. Please help. Thanks.

OEM remote does not work while remote started

Wed, 19 Oct 2016 11:28:53 +0000

2008 VW GTI W/ DSG Transmission. Installed EVO-ALL w/ CrimeStopper Revo 1.1 external RF kit. I am also using Flash Link Updater 2 w/ Flash Link Manager v3.61 (which I do not see anymore on the fortin website). On the Fortin website for my vehicle, it says on Installation Notes "OEM REMOTES NOW FUNCTIONAL WHILE REMOTE STARTED" but when I remote start the vehicle with my Revo 1.1, my OEM remote does not unlock the vehicle. This forces me to turn off the remote start with the Revo 1.1 key then switch over to my OEM remote and unlock. Are there specific options I have to choose in Flash Link Manager?

Can't get into remote start mode in Flash-Link

Tue, 27 Jan 2015 21:10:57 +0000

Evo-All with GM V2 harness for 2011 Camaro SS. The Flash Link software will let me into the bypass settings but I cannot get into the remote start settings. It tells me that the unit is disconnected. I tried using the "special unit" and have had no luck.

Also, when I programmed it, the finally step didn't seem to complete and I have a continuous blue light on the unit. Does that mean that my CAN wire isn't getting a good signal?

Will this software work on a windows 8.1 computer?

Sun, 25 Jan 2015 11:21:08 +0000

On the download page windows 8 is not listed as a supported system. Has anyone tried it on windows 8.1? Did it work?

My EVO-ONE will not detect on bypass mode on flashlink manager3 but will detect on remote start mode?

Mon, 12 Jan 2015 13:34:34 +0000

It will not detect in bypass mode. I have tried unplugging it before switching to no avail.

EVO ALL Programming and how i know its updated

Mon, 12 Jan 2015 13:10:43 +0000

can anyone tell me my firmware version my service number is 001A06459314

evo-one does not flashlink2

Mon, 22 Dec 2014 07:57:23 +0000

each time i plug evo-one on the flashlink udater 2, unit automatcly disconnects after a few seconds. in remote start mode its ok( i can flash it ) but in bypass mode i cannot doe anything. tried another module on my flashlink and it goes fine. Is the evoall part of the evoone defective ?

cannot program evo-one on flashlink2(bypass)

Sat, 20 Dec 2014 13:45:11 +0000

Evo One bypass settings for DEI DSM250?

Fri, 05 Dec 2014 17:11:37 +0000

Hi -

An Evo One is installed on a 2014 Tundra, and being used for remote start (3x lock), works great, awesome product! A DEI DSM250 is being installed as an extenstion onto the Evo One, and we would like to confirm the proper settings via the flash loader.

This is what we believe needs to be set on the Evo One...

Flash Loader - Bi-Pass Settings (?):

#20 - GPS / I/O (the DSM250 is GPS enabled where as the DSM200 is only "RemoteStart")

#21 - D2D

#23 Supported RF Kits Available - select #4 (DEI Smart Start)

Flash Loader - Remote Start Settings (?):

It doesn't appear I need to change any of the functions 1-39?

Thanks in advance

DCryptor problem

Wed, 03 Dec 2014 15:55:11 +0000

the DCryptor menu doesnt come up in flash link manager everything is up to date after install and program evo all instucted to reconnect to flashlink manager but the DCryptor tab doesnt appear

Why Firmware version: 0.00 ?

Thu, 14 Aug 2014 03:21:32 +0000

Service No: 001A06337729

Preload date: 13-2014

Hardware version: 6

Firmware version: 0.00

Recommended version: 74.17

RS232 protocol: FORTIN

Vehicle: Mitsubishi Pajero Sport (Euro) 2014

Is there a page/note outlining that older firmware is required for succesful connection?

Thu, 31 Jul 2014 07:37:02 +0000

I've noticed many older vehicles actually require older versions flashed on the EVO.

EVO-CHR cannot change options

Sun, 02 Mar 2014 09:02:45 +0000

It is impossible to enter by means of FLASH-LINK the options EVO-CHR for change of installations I receive the message from FLASH-LINK MANAGER "the current unit doesn't support this feature" and there is unit disconnected, before the following physical connection

Service number: 001e06067477

What are all the Stand-Alone options?

Wed, 26 Feb 2014 09:56:36 +0000

With the different ways to get to Options, and different formats within those ways, I do not fully understand what I can do to program the EVO as a Stand-Alone. Options from the lower right button seems to have a lot more to them than Options from the upper tab.

Is there a manual that states what exactly each feature does?

Is there a setting that will prevent my car (2010 Altima) from unlocking the doors after turning off when the EVO runs for its allotted time (or quickly re-locking them)?

Thank you,

Flashlink updater for mac book???

Tue, 14 Jan 2014 22:52:28 +0000

is there any way to get the flash link updater on my macbook lap top?? or do i have to have a microsoft computer to install the program on??

Final step of programming the module and the Blue LED doesn't flash? It stays solid.

Thu, 02 Jan 2014 23:33:48 +0000

2010 Chrysler T&C, purchased EVO-ALL with THAR4 T Harness. Also utilized the Flash Link Updater and Manager.