Questions & Answers - Recent questions tagged ford

Hi, do you have solution for Ford Escape 2025 ?

Wed, 11 Mar 2026 00:53:31 +0000

Hi, do you have solution for Ford Escape 2025?

2013 Ford Fusion 1.6 Manual - Clutch bypass pinout

Sat, 28 Feb 2026 18:48:53 +0000

Hi,

Does the evo one support manual mode for the a 2013 fusion manual? Need the pinout from the bcm to bypass the clutch switch for remote start. Does it need to be driven by a relay? Also will the evo one detect the electronic handbrake via CAN? Can I use the t harness and then wire in the bypass separately?

Ford remote start

Thu, 11 Dec 2025 06:08:07 +0000

Is it possible to install an Evo-All on a Ford like on a VW and a Juke?...With brakes and start-stop?

EVO-ONE 2022 Ford Bronco Clutch Bypass

Sat, 27 Sep 2025 15:50:45 +0000

As per the title; has anyone completed or have any information, diagrams or guides on a clutch bypass for the Fortin EVO-ONE on a 2022 Ford Bronco.

How to program after getting new keys made

Wed, 25 Jun 2025 02:10:37 +0000

I broke my original key remote start was working with that key. Locks smith came out and made me two new keys and now remote start doesn’t work. 2008 Ford F-150 with the “Key Override All” and “FirstTech CM900” how to reprogram what’s in trouble shooter page 16 doesn’t work.

EVO-FORT4 MANUAL TRANSMISSION INSTALLATION GUIDE

Sat, 10 May 2025 07:00:08 +0000

2018 Ford Fiesta with Manual Transmission EVO-FORT4 Installation Guide?

Ford f150 2011 Evo all standalone that-for4

Fri, 21 Feb 2025 12:07:57 +0000

Evo all 06/2023

Sn 001A07511495

Ford f150 2011 Evo all standalone that-for4 Doesn’t no program, I have been trying different times and ways and I don’t get it.

Only get that the red and blue lights flashing 10 times but the blue light never come back, waiting long time and it doesn’t flash back. Of course using 2 working keys. I tried using a video that says, press the programming button after uses the second key but it didn’t work either. I tried without connect the red connector but it didn’t. Then I don’t know what more to do. Could you help me please. Thanks.

doors unlock with start and radio stays on after starter shut down

Wed, 15 Jan 2025 19:03:01 +0000

I have an EVO-All installed in a 2016 Ford Focus standard key as stand alone unit using FORT4 Harness. the car will start with lock - unlock - lock but the doors unlock when starter engages and remains unlocked unless i manually lock it. when the unit times out or i stop it with the command the radio stays on.

unit is 001A07414606

green/ purple is cut. green-white going to 0volt side and green-red going to 12volt side

white black tapped into grey-yellow

white tapped into purple-grey.

Any help would be appreciated

Edit: I turned on lock after start in the settings and it relocks now. when shutting down it will unlock then lock twice and radio still remains on

2011 Ford E250, stuck on solid Red and Yellow Lights during EVO ONE programing procedure

Sun, 05 Jan 2025 12:28:22 +0000

I finished installing the EVO One on my 2011 Ford E250. Made sure that all the wire were connected correctly based on Guide # 86051. I also installed a relay switch for the parking light the same way as shown in the wiring diagram. I used Flashlink to install the lattest 71.57 Bypass firmware and 1.26 Remote starter firmware. I tried many different troubleshooting steps such as disabled A11 according to the guide and changing the programable output to 2.2 to match the wiring diagram. I also tried older version of firmware to no avail.

No matter what I do, it always gets stuck on solid Red and Yellow Lights during step 4 of the the programing procedure when the ignition is turned on. The car I have is regular key without transponder chip. I tried both the 2 keys and DCRYPTOR programing procidure but both has the solid Red and Yellow issue as soon as the ignition is turned on. Please let me know what I am doing wrong and how I can resolve this issue.

2016 Ford Transit No PATS Transponder Keys. How to Program EVO-FORT4 to vehicle?

Fri, 27 Dec 2024 10:42:56 +0000

2016 Ford Transit No PATS Transponder Keys. How to Program EVO-FORT4 to the vehicle?

Where do i find insaltion diagram for f350 diesel 2019

Mon, 16 Dec 2024 15:45:39 +0000

Acesess insturtions instaltion

Ford Focus + Evo-One clicking when driving

Tue, 26 Nov 2024 06:09:55 +0000

Hi,

I completed the install of the evo one in my 2012 ford focus manual. Everything works in terms of remote starting, but when I’m driving ever time I hit the brake pedal the evo one click 3 times. This can become quite the annoyance in traffic.

Is this due to programming, my manual ready mode is set to activate with foot brake and parking brake as I did not purchase the RF kit.

If I purchase the RF kit would this stop the Fortin from clicking while driving as it would only start the ready mode sequence after I hit the remote starting button?

Thanks

2004 Ford explorer not seeing inputs from lock

Mon, 28 Oct 2024 23:04:48 +0000

I installed my EVO-One and was trying to program it to see the keys and this is when i first noticed that the evo was not seeing the inputs from the factory key lock and unlock, luckily i was able to get around it by starting the car with the key, and it accepted it, so further down the road i now have it fully programmed and installed, i turned on the feature that when you start the car and step on the brake it locks the doors, which it does, then when you shut the car down the doors unlock, which it also does, so the Evo is able to control the locks fully, but it is unable to see the command from the car, do i have to have a seperate remote because i really don't wish for that, am i missing something? like i said it sees the car start, it sees it shut down it controls the locks fully, but when i push the button the evo doesn't respond to the inputs at all. is it a setting that i messed with by accident?

2023 Ford Raptor (for reference)

Tue, 28 May 2024 07:24:53 +0000

For reference...On the 2023 Raptor, the CAN wires were in the left threshold, under the large black connector. The rest are all like the F-250...

2023 ford ranger

Fri, 26 Apr 2024 11:19:12 +0000

Good evening. The 2023 Ford Ranger does not have a factory-installed remote engine start on the monitor. What should we do?

Is there an instalation video or instructions?

Mon, 19 Feb 2024 08:39:38 +0000

There are no instructions or video

2018 Ford f150, why no blue flashing light after programming

Mon, 05 Feb 2024 07:37:25 +0000

2018 Ford f150 standard key without keyless entry, evo-on, T-harness FORT2, firmware 4.01, not getting the blue flashing light or red yellow alternating at step 8 of bypass programming procedure, getting the red flashing light 1 flash per second after the last step where ignition turns on and off by itself.

no wires on selected vechicle

Mon, 15 Jan 2024 12:27:37 +0000

I selected ford transit 250 and used a token but the correct wiring was not under that vechicle. Seems it maybe under transit, please add a token back to my account so i may get the correct wire list.

Thank you,

Devin

Thinking out loud about this 2008 Focus install

Sat, 30 Dec 2023 14:33:40 +0000

I saw a couple of other manufacturers have a T-Harness that works with the 2008 Focus, but not Fortin's. I also noticed that the FORT1 is compatible with the 2008 Taurus. So I pulled up the install sheets:

https://fortin.ca/download/107381/EVO-ONE_IG_REG_BI_FOR-FOCUS_2008-2009_A_107381.pdf
https://fortin.ca/download/95201/EVO-ALL_IG_RTS_BI_FOR-TAURUS-2008-2010_KEY40bits_A_95201.pdf

The ignition connectors appear to be the same form factor and the same pinouts, but different wire colors. Just wondering if someone could perhaps review this and see if this would change the install options at all? Like using the THAR-FOR1 with the EVO-ONE? Or possibly being able to use the EVO-FORT1 or FORT4?

I do see that the Focus install has a Disarm wire connection that is not present on the others. The other guide for reference is here

Appreciate it!

Remote start needs to be enabled on a 2008 Focus?

Sat, 30 Dec 2023 13:21:04 +0000

Looking into doing an install on a 2008 Focus. Came across this thread:
https://fortin.ca/en/qa/103382/09-focus-remote-start-works-great!-However-the-heater-fan-does-not-run-untill-the-key-is-turned-on./

Wondering if one of the Fortin guys can verify if Forscan is needed or not. Haven't come across this before.

Ford Mustang car parking lights and interior lights goes on and off continuously

Sun, 17 Dec 2023 10:05:56 +0000

Hi,

I have connected the Fortin remote starter like the picture below.
https://ibb.co/tc6YLN0

When I try to start my car (3 clicks close door) it starts. After that either I wait timeout (30 minutes) then car stops or I do again 3 clicks and car stops.
However, after a while car parking lights and interior lights goes on and off continuously.

Besides that issue, If I start my car remotely and start driving and stop, when I remove the key from the ignition, car makes warning sound continuously like I forget the lamps turned on or I forgot the key.

Here is a video
https://www.youtube.com/watch?v=t9AIJGylpYM

My headlight switch supports Auto mode but I keep it turned off manually.

Did I forget to make a required cable connection somehow?
I have only OBD can low/can high connection and necessary harness connections to the Fortin module at the moment.

Hope I explained the situation clearly.

Thanks in advance.

Best regards

No crank on 06 Ford Focus (Evo One and RM442 Remotes)

Sat, 25 Nov 2023 17:06:21 +0000

Using the 1 key with Decryptor method, I programmed my evo one and paired the key fobs to the antenna, but when I try to remote start, it doesn't crank. It's sending power to the ignition and the anti-theft is not blinking so I think the bypass is working, just not sure why it doesn't crank.

I should also add that the fob doesn't work to lock/unlock the doors, nor does it open the trunk. The antenna and module are clearly receiving commands but aren't able to do anything with them. I'm confused how this is supposed to work anyway, as the installation guide doesn't have me splicing lock signal wires to the module. Is it supposed to send the lock/unlock signal through the RX wire at the ignition cyclinder?

I have a basic level of experience with electronics but I'm stumped here. Thanks in advance for your help.

My 17 transit starts when red connecter plugged in

Thu, 16 Nov 2023 07:13:19 +0000

17 ford transit, evo all ver 71.52. service # 001a06761904. this was purchased from 12v solutions and havent been able to help with my issue. intial harness install and module programming went well. when i installed the cl6 smartphone app module, the vehicle started once from the phone app then would not turn off from the app, or pressing brake. i had to disconnected all the connections on module. now, vehicle starts as soon as i connect red plug. b4 i return for a refund, thought id ask here

2022 ford ranger

Thu, 02 Nov 2023 10:20:45 +0000

Will the 2021 manual work on the 2022 Ford Ranger?

2012 Ford Explorer EVO-ALL The engine won't start.

Fri, 27 Oct 2023 21:33:14 +0000

I installed EVO-ALL on a 2012 Ford Explorer.

The wiring diagram is on page 3 of #94851 (WIRING CONNECTION) and I have completed the wiring and key programming.

When I press the lock button on the key 3 times the ignition turns on but the engine does not start.Nor does the cell.The cell won't turn either.

SN:001A07465529

FIRMWARE VERSION 71.52

best regards

How close do you have a solution for the 2023 Ford F450 Super Duty?

Fri, 13 Oct 2023 13:15:19 +0000

This vehicle is completely different.. having 3 Canbus line running FD protocol.

I have 4 units that are itching to get remote starter done

2017 Ford Focus Parking Light Diodes

Thu, 08 Jun 2023 19:47:03 +0000

Guide 72871. 2x 3 Amp Diodes and for L/R parking lights and 10 amp fuse behind glove box. I see these are optional, but what are their intended uses? or recommend use for?

Evo-all works only 10 minutes

Mon, 13 Feb 2023 09:26:23 +0000

This module 001A07414277 didn't work on the Prius but it worked on the 2015 Fusion... But.., it only works for 10 minutes and stalls. I set the engine running time to 30 minutes, but it still stalls after 10 minutes.

Remote start programming issue

Thu, 09 Feb 2023 22:53:34 +0000

I have a 2000 ford excursion with the 6.8 v10 and I have just installed a mpc remote start kit number 4232. After installing by soldering in a bunch of wires I got to the key programming stage where a fortin instruction page is included and I follow the steps it says but the red light on the key override all module won't blink the 10 times like it says it should. If I plug the antenna in it will put the truck into run mode and begin trying to crank the motor but will not fire leading me to security issue because the key won't program. The instructions say for the ignition switch connector I should have connector H but in reality I had connector C so I connected the tx and rx wires as instructed but I am confused to where to go next

Trying to add compustar T13 RF kit and drone

Thu, 09 Feb 2023 16:01:35 +0000

I have 2012 Ford fusion, the evo all and compustar T13 RF kit and I can't get it to work

2014 Ford F-150, 2 Keys programming.

Thu, 02 Feb 2023 08:47:50 +0000

Hi there. I have one question about Ford OEM keys.I am trying to program a compustar module on a Ford F-150. I only have one OEM key and the other one is made by a locksmith (it's not a clone and it's not a copy) But I can't finish the programming because the module tells me that I am using the same key or a cloned key. My question is: does Ford split any code between two keys? If you don't have both OEM, is it not possible to finish the programming even if the key made by the locksmith is not a copy or a clone? I need some information about this. Thank you very much in advance. Kind regards.

3x lock not working after a long time parking

Fri, 20 Jan 2023 14:19:32 +0000

Hi,

I configured my fortin evo-all with 3x lock configuration.

The scenario I have;

If my car parked for a while i.e. 1hr or more, 3x lock does not trigger start engine.

To solve this, I start car manually with the key then stop engine, 3x lock start/stop working again.

Somehow the module losing electric after a while or It has problem something different.

Any suggestion?

Best regards

I can't program the device for 2013 Ford Mustang

Fri, 20 Jan 2023 04:49:00 +0000

Hi I have an Evo-All product,

I updated the device with flash link by choosing Ford > 2013 > Mustang > Automatic > Standalone Remote Starter Only > 3x lock remote start > No RF Kit

Decryiptor YES
Key Programming 1

Regarding the guide (https://fortin.ca/download/72091/evo-all_ig_tsa_bi_for1-mustang_2010-2014_c_72091.pdf)

- I release the button when it's red.
- I attached remaining cables
- I click button once
x red light is not flash
x I tried anyway I put key and open Ignition however It did not do any action.

Here I tried to explain

https://youtu.be/s7O73kwiCX0

Yesterday I tried to program 2 keys. Also no success :( However I clicked lock button 3 times. After that car gives immobiliser error. When I put my car key manually, car started automatically.

After car started I clicked 3 times lock button again then car stopped.

Here also another demonstration about that

https://youtube.com/shorts/qOaY6rogeyM

Demonstration for 2 keys

https://youtu.be/_3ikxnDdltQ

The firmware on the device is 71.52 [recommended]
Hardware inside 7.0

Hope I could explain good.

Best regards

2010 ford escape KEY-OVERRIDE-ALL

Tue, 17 Jan 2023 20:09:09 +0000

I'm installling the KEY-OVERRIDE-ALL with a DEI remote start.

When I attempted to program prior, I would see the LED start flashing, but programming didn't complete.

Now when I attempt to program, the LED on the module stays on and the security light on the dash flashes rapidly.

I've confirmed I have 12V on Red, Ground on Black, Ignition on Yellow, and remote start staus on Blue.

Is there anything else i should try on this module? The module was purchased new in December and hasn't been installed in another vehicle.

Fiesta 2014 Manuel

Fri, 18 Nov 2022 14:58:05 +0000

Bonjour à vous tous, J'aimerais savoir si c'est possible d'installer un démarreur à distance dans un Ford Fiesta 2014 manuel? Tous les guides d'installation spécifie transmission automatique seulement? Je me rapelle en avoir déjà installé et j'aimerais savoir si il est survenue un incident et qu'il n'étais maintenant plus recommandé de faire des Fiesta manuel. Le client possède déjà son démarreur Autostart et j'utilise un Evo-All comme contournement. Merci de m'aider avec mes questions

2011 Ford Fusion Standard key, only blows cold air after remote starter installation

Wed, 16 Nov 2022 14:38:58 +0000

I installed evo one remote starter on the 2011 ford fusion s, i hard wired all the wires, did not used t harness, but after installation, i was getting only cold air from the vents with starting from remote, i can change the blower speed. couldnt change the vent modes and the air temp.

if I start it with the key, heat blows only for couple minutes and it switch back to cold air it self, and has to restart the car to make it blow hot air for another couple minutes. any idea what could be wrong here,? any help will be appriciated,

2018 Ford Focus Turbo Timer

Wed, 21 Sep 2022 11:37:03 +0000

Hi there,

I want to set up a turbo timer for my ford focus its an automatic transmission with the Evo-One. What settings do I need to enable on the evo one to allow me to do this? As well how do I use the turbo timer on an automatic transmission. Do I just need to put the car in park set the E brake and hold the start button on my rfk912 remotes then promptly exit the vehicle and locking the vehicle behind me.

No Power to EvoAll 2008 Ford Escalp with Tharness

Wed, 14 Sep 2022 13:35:09 +0000

Hello, I have an Evo-All with a FordThar1 installed in a 2008 Ford escape for stand alone remote start. The vehicle will start and run with the Key normally, but iim not getting any power to the Evo-All. Ive verified this with a DVOM and use a second EvoAll module. Is my T Harness faulty? or is there something else ive missed?

Ford Remote Starter Conditions

Thu, 26 May 2022 20:54:59 +0000

2021 Ford F450

Does your remote starter solution only enables the OEM remote starter on this vehicle?

Would the EVO-ALL or EVO-ONE will still remote start this truck even if:

- CHECK ENGINE LIGHT IS ON.
- LOW FUEL LIGHT IS ON.
- VEHICLE BATTERY VOLTAGE IS TOO LOW

We are planning to install these on 4 work trucks

removed this kit now car wont start with key

Tue, 22 Feb 2022 17:50:54 +0000

ok i am an installer at 12 volt solutions in tulsa oklahoma, and we installed one of your evo all kits in a 2016 ford escape, and couldnt get any power to the module so we removed the kit and plugged it all back up factory and now as soon as you turn the key to accessory it tried to start, and when you try to crank it over it does nothing. All the lights and the radio come on but wont start.

Evo all- For4 in a 2014 F150. The factory alarm is tripped after the first auto start

Tue, 18 Jan 2022 20:56:12 +0000

The truck will remote start once without any issues. The second attempt at remote start sets the factory alarm off and will not start the truck. Not sure what I'm doing wrong. I have the flash link updater so i can change whatever settings you recommend. Any help would be greatly appreciated.

2013 FORD FIESTA EVO-ALL- starts on its own After driving vehicle and 1xlock is used to lock doors after

Wed, 12 Jan 2022 23:00:06 +0000

2013 FORD FIESTA

EVO-ALL WITH THOR-FOR1 T-HARNESS

S/N 001A07321575

1 OEM Key programed

lock / unlock/ lock for start sequence

Yellow/black wire on 20 pin connector is NOT grounded

EVO-ALL performs as expected until you exit the vehicle after driving and you lock the doors using the 1x lock on the OEM Key. As you walk away from the vehicle the Evo-All starts the vehicle on its own. Once this occurs the vehicle can be shut down using the lock/unlock/lock

Have tried exiting vehicle with brake depressed while using door handle to unlock the vehicle on exit. which should disengage the Evo-All. However, the vehicle still starts once lock the doors using 1xlock with the OEM key

Evo All setting off intrusion alarm and not starting car

Tue, 11 Jan 2022 09:26:01 +0000

I installed a prewired evo all into my 2018 Ford Escape. All programming went just as the instructions said and both factory keys successfully programmed. When I go to tripple lock the car the start it, the accessory power turns on, then the intrusion alarm goes off and the car does not start. How can I resolve this issue?

2006 F150 door locks inop after remote start timeout

Sun, 09 Jan 2022 22:04:47 +0000

2006 F150 5.4 FX4 with EVO ONE and RFK 441. The unit works fine however after the 15min run time out or if you shut the vehicle off with the remote the doors won't unlock with fob or the keypad on drivers door, lock still functions. If you open and close the door then it begins to work again

The only way to remedy this is to use the key to open the door or to remote start the truck and unlock the doors. This is very much a truck issue not a remote start issue as this vehicle is all analog connections. Is there a wire that I can have pulse the door pin to shut the radio down and simulate the door opening as I believe that would fix it. There was nothing mentioned in the install guide.

When pluging in the data pin to program the led lights fail to come on

Sun, 19 Dec 2021 13:30:39 +0000

installation on ford fusion 2012 no led light on evo

Security light keeps flashing while driving even after key take over

Sat, 18 Dec 2021 00:24:47 +0000

I have the RFK 912, my wiring is correct but when i go to do key take over with the key turned to the run postion and press on the break the attena acknowleges and gives me a solid green light but shortly after it starts to flash again. Even restarting the car doesnt seem to work, the only time it doestn flash is when the car is off and i go to unlock it with my RFK Fob

I have the evo one for reference

SN: 002B04220286

Evo-all 2009 ford escape - no blue-light after sitting for ~ 5 minutes - no start

Wed, 08 Dec 2021 23:21:24 +0000

Hello,

Installation and programming went great. Verified firmware with the website info. Using Thar-For1 and flashlink manager for the install. Escape worked several times in a row with the remote start, but as soon as its left off to sit for a few minutes, the remote start doesn't work anymore. No blue light when the lock button is pressed.

Unplugging the 4-PIN Data-link harness and plugging it back in allows the remote start to work, but after a few minutes off it stops responding again.

Rf remote program

Thu, 25 Nov 2021 22:17:09 +0000

Hello, i have a evo-all-442 installed into a 2009 f150, i have the evo all programmed fine lock lock lock works,

when i go to program the fobs, the antenna does not flash and the fobs will not program, i was using the prgram instructions that came with the kit, is there any other way to program the fobs?

Evo one include an rf kit

Thu, 18 Nov 2021 23:03:34 +0000

Does an evo one for a 2009 f150 include an rf kit with a 2 way fob?

2015 fusion. firmware version 4.01

Sat, 13 Nov 2021 12:05:15 +0000

Hello. I want to install evo-all (standalone) on 2015 Fusion version 4.01 (96151). Isn't it in the manager? It says 7152