Questions & Answers - Recent questions tagged ftd-100

EVO-ALL + FT-D100+Compustar RF kit

Tue, 29 Sep 2020 10:40:55 +0000

I installed a few different car using EVO-ALL + FT-D100 + compustar RF kit which is working good until car battery is dead or replace. Factory 3x still working but compustar remote is not woking anymore. I need to reprogram compustar remote then working again. All FT-D100 is update firmware before I installed. That problem is not only one car, it seen all car same issue. Any idea? Thanks.

I have four pin compustar rf kit so still I need ft-d100 converter for evo all or I can use only four pin wire

Tue, 19 Nov 2019 09:31:22 +0000

I am going to use standlealone regular installation

Evo all without ft-d100

Tue, 27 Aug 2019 01:54:07 +0000

Hello, latest compustar rf.kit listed on your website are equipped with the new antennas with built in decode, i bought a conpustar rf kit but the ft-d100 is not needed (like in the evo-one) i can connect directly the antenna to the blue plug of the t harnesses, btw i cannot select in the menu options of the evoall the firstech option in the rf kit tab (in evo one i can do it). Can u implement this function with the evo all? Thanks

ft-d100 + RF-AR2WT10-SS + evo-all

Thu, 22 Aug 2019 12:59:40 +0000

Hello, just bought this kit. I have paired succesfully but i have not 2way trasmission, only 1way. Any ideas? Thanks!

T9 not programming though Ft-D100 with EVO-ALL

Wed, 28 Nov 2018 17:46:22 +0000

I have a EVO-ALL installed in a 2014 ford focus hatchback with a key start, and i'm trying to add a compustar T9 rf kit to it. I have installed the FT-D100 (switching the blue and white wire before pluging into the unit) to go between the two and flashed the correct firmware for the unit. When I replug the 4 pin connector and go into the programing mode the lights do not flash. I do get all lights on when in the programing mode but it does not seem to see the remotes.

How to add RF-2WT10-SS to evo-gm3 with FT-D100 RF decoder

Tue, 03 Oct 2017 07:51:35 +0000

How to add RF-2WT10-SS to evo-gm3 with FT-D100 RF. wihch wire do i plug from the eve-gm3 in to the FT-D100 in the sucket with plugs side byside with 2 pin and 4 pin or 4 pin and 6 pin they are same plugs on evo-gm3 and the compustar.

Thanks

EVO-ALL + FT-D100 w/ 2 WAY COMPUSTAR- Lock doesn't work

Fri, 11 Dec 2015 18:04:33 +0000

I succesfully paired the Compustar G9 2-Way antenna via the FT-D100 RF decoder but locking does not function on the Compustar remote. I get a success chirp / green flash on the fob and I can see the EVO-ALL recieving the command but it never actually locks. Unlock & Remote start work perfectly. I have tried swapping the blue/white on the data link back to see if it is a communication error as well. Is there something I need to enable on the EVO-ALL aside from the FT-D100 RF option?

Another weird note. I couldn't get 2 way notification to work until I unplugged the canbus and plugged it back in after programming. Prior to that the Compustar remote was only working as a 1 way.

evo all & compustar 2 way g9 rf kit+ft-d100 decoder

Fri, 06 Feb 2015 21:25:33 +0000

it works but it does not communicate back to the remote after start, is there some setting that needs to be change on the evo all?

I've read that two way communication works with the evo one, its the evo all not capable of using this feature because the ft-d100 adapter impedes this?

ftd-100 is required?

Tue, 09 Dec 2014 22:13:01 +0000

ftd-100 is required?

what if the antenna is a 4 pin, would the evo-one be directly compatible with that?

instructions says to change the order of the wires around on the connector.