Questions & Answers - Recent questions tagged g37

My Remote Start Stopped Working in my G37 Sedan for the RF Controller and OEM controller

Fri, 05 Jan 2024 09:48:07 +0000

My Remote Start has been working just fine since 2017. Lost Remote Start on my oem controller and rf controller. Lock and unlock work fine. Do I need to do an update? Refresh?

2013 G37 Automatic Lights

Thu, 08 Sep 2022 03:47:29 +0000

I just installed my Evo-All and THar-Nis1 in my 2013 G37xS Coupe. Everything works flawless except for the timed shut off, and when I use the key fob to shut off the engine. My running lights stay on.

Q40 Parking lights turn on intermittently on remote start

Sat, 10 Apr 2021 19:24:24 +0000

I have the EVO-ALL with the T-harness installed on my Infiniti Q40 and G37S Coupe. The options are set identically. On the G37, when I remote start, my parking lights always turn on when I remote start the car. This is not always true on my Q40. More times than not, the parking lights do not come on at all. Option A14 is currently off on both vehicles. I tried turning this option on on the Q40 but there is no change on how (when) it works. The only real difference between the two is the type of RF kit I have installed. Any help will be greatly appreciated.

Edit: Lights come on every time I remote start the car in the garage. Not when I start it outside the garage and it's sunny and bright. Lights switch is set to off for each of the tests.

2008 Infiniti G37 coupe, OEM Remote start option on Setup

Sun, 14 Mar 2021 06:10:47 +0000

Trying to set up a new Module for Infiniti G37 2008

But there is no option for OEM remote start.

It only shows 3 options and all are AFTERMARKET.

Please help

G37 programming module

Sat, 27 Feb 2021 15:30:49 +0000

I'm trying to install an EVO-ALL remote start on my g37. Already tapped into the push-to-start button and made the T-Harness connections with the OBDII, keyport, and brake switch. Tried programming the module but when I inserted my key fob into the key port, the dash is saying to remove the key. Closed the door, that got rid of the light, but while I was going through the programming steps, I can't get pass step 4. I press the PTS button to turn car to ACC mode, but module does not flash red or blue. IT only stays solid yellow.

I've already flashed the module with the flashlink 4. & i'm pretty sure the connection between the ignition and PTS wire is good. Idk what do. any help?

infiniti g37 72.04

Tue, 22 Dec 2020 13:33:19 +0000

I bought evo-all. On the stamp of the module there was the date 02/2020. And, in it had a blocked module with the firmware 72.04 - 2009 infiniti g37. What's the matter? 001A07 135457

2008 infiniti g37s coupe push start automatic transmission from us in miles

Sat, 07 Nov 2020 01:25:52 +0000

Hi guys

I got the Fortin Evo-NIST1 with T-Harness and followed guide 80851 for auto transmission.

I got all the wires mentioned connected. Brown wire from t harness to red wire by driver kick panel and the whiteblk to push start brown wire, at the bcm I got the two wires in the pin and tapped the 2nd wire which is red for me in the bcm. The bcm pin wire for (-) door pin is red color wire for me. The programming went smooth but The car doesn't start. When diagnosting I touch the dkblue wire to ground the break lights up and the module has red light. Three times lock the module blinks blue and that's all.

Three times lock button module blinks blue everytime but the car does not start. The module does not have any lights after the blue blinks.

Please help.

2011 g37 evo all not programming anymore

Tue, 14 Jul 2020 21:49:56 +0000

My evo all on a 2011 g37 coupe stopped working i realized the brake lights was not turning on, so i tried to reflash it and now i can't get past step 4, the yellow led goes solid and then i press the push start button one time for acc the evo all does not turn red anyone know what the issue could be? i tried different firmware's and resetting the evo all but no luck. thanks

G37 EVO-ONE

Wed, 22 Jan 2020 16:36:03 +0000

I have the evo-all with THAR-NIS1 installed in my 2012 G37. Everything works but there's no 2 way with my directed smartstart; status, diagnostic, ect. I see now that the evo-one comes with THAR-NIS1 and it cost more. What's the difference? If i switched over would i be able to do 2 way? Would it be as simple as unplugging the evo-all and plugging in the evo-one? Thanks

2011 G37x - pins not fitting in BCM connector?

Fri, 22 Nov 2019 19:35:01 +0000

My car starts up just fine remotely, however, if it times out, the doors don't lock because the lock pin isn't connected. However, when I try to insert the lock pin into the connector, it seems to not want to go in all the way. I cannot figure out how to insert it for the life of me.

2011 Infiniti G37 crimp terminal type?

Thu, 14 Nov 2019 17:56:33 +0000

While installing the pin into the BCM connector behind the passenger kick panel, I accidently broke the crimp terminal on the lock wire. Now the car can't lock when I turn it off from the remote. The wire size is 24awg. Does anyone know what type of terminal these wires use so I can replace it? Thank you in advance.

'12 G37 - Is my EVO-ALL broken?

Fri, 18 Oct 2019 20:56:21 +0000

[EVO-ALL install on 2012 Infiniti G37 w/ THarness; SN/001A07 008704; Guide #80851]

Issue:

Cannot program the EVO-ALL. I get stuck on step 2. When I press the button twice, the yellow LED doesn't start blinking.

In addition:

1) I noticed if I remove the data link cable from the EVO-ALL while the white 20-pin connector is installed, the locks contantly go off (always locking).

I have gone over the wiring many times and am confident it's correct.

2) During step 1, I have to disconnect and reconnect the data link cable several times before it finally begins cycling through the LEDs.

Is this normal? or is it asign of bad wiring? bad unit?

Evo-one install on infiniti 2008 G37 6 speed manual but only lock and unlock work. Remote start does not work.

Wed, 13 Mar 2019 19:00:04 +0000

Hi, I’m installing EVO-one with Omega LINKR-TL2 on a 2008 Infiniti G37 6 speed push to start. I follow the installing guide #33251. I flashed the unit up to the latest firmware. Previously I had a DEI XL202 romote start that connected to EVO one. Tested the unit and only lock and unlock working but when attempt to remote start the car. Only see 3 parking light flash. So I though that it could be DEI XL202 is not functioning correctly so replace it with Omega LINKR-TL2 unit but still have the same result. I have been talking to Derek for his assistant and suggested to master reset both the bypass and remote start. Reset the module and reprogram with his suggested selection (BYPASS SIDE: A1-A11 -ON, C1 -ON, REMOTE SIDE: 8.2, 32.2, 33.3 AND 38.2) but have the same result. I’ve been doing a lot of online researching for the passed 2 week but still no luck. (Now only lock and unlock working) Your help will be much appreciated.

2009 G37 EVO ALL NOT WORKING AFTER FLASH

Sat, 09 Feb 2019 19:35:32 +0000

1) I Installed EVO All and Tharness (programmed EVO while hooked up to harness in car > Evo lit up blue when pushing lock but car would not start using oem remote. (Learned I needed flashlink)

2) Bought flashlink 4 and updated and flashed EVO All

3) Reinstalled EVO All and ZERO lghts came on and car did not start

I followed recommended settings:

A1-11 ALL ON

B2 OFF

C1 & D1 ON

D2 ON

After flashing the EVO I depressed the program button and no lights come on. I plugged it back into the wiring harness and again, no lights. Before I flashed it the red light would come on while depressing the button...what could have happened?

FRUSTRATED!!!

2009 Infinity G37 OEM remote No Start

Mon, 04 Feb 2019 19:57:01 +0000

I just finished installing the EVO-NIST1 (no other components) on my 2009 Infinity G37. After hooking up the wiring harness I completed the bypass programming procedure and everything went good until I tried to start the car using my OEM remote. I pushed my OEM remote 3 times and the car did not start. Each time I pushed the lock button a blue LED light flashes on the EVO unit but nothing else happens. Do I need to order a stand alone remote? Do I need additional components? Not sure what to do here.