Questions & Answers - Recent questions tagged guides

2015 Toyota Tacoma G-key Wire diagram

Mon, 22 Jan 2018 10:50:58 +0000

Just wanted to make sure .... I have a 2015 Toyota Tacoma with normal key. When I click on intallation guide for evo-one and thar-toy2 harness it says 2010? If I click evo all guide says 2010-2011. I just wanted to confirm these are both correct for a 2015.

Thank you,

Brian

Wiring question, 2006 Lexus GS300

Sat, 08 Jul 2017 00:07:15 +0000

Hello,

I've been doing some research on the remote start kit. I have the Evo-one kit. Is it really 7 wires that I have to splice into? I'm looking at the harness, and I see one for ignition, starter, door locks, etc.

Also, it said something about programming in Diesel mode but at the beginning of the instruction, it said to program function 20 mode 4.

Wiring diagram question 2014 Toyota Tacoma

Mon, 12 Jun 2017 07:01:53 +0000

I've installed 4 or 5 of these evo-ones in multiple vehicles with a t-harnes. However I have a quick question on this 2014 Toyota Tacoma 4cyl w/ t-harness. I just want to make sure I'm reading the diagram correctly before I start. Guide#19621.

On the IMI wire... when the wire is cut at the white ecm plug. Do both of the following wires go to the ecm side of the plug?

white/red D6 to the cut blue/white wire on Ecm plug side

lt blue A20 to the same blue/white on Ecm plug side

white/green D4 to the other cut end of the blue/white wire?

Then just splice the IMO wire..

lt blue/black A10 to green/black at ecm plug

Thanks

Infiniti M37 Wiring Diagram Error?

Tue, 24 Jan 2017 17:19:15 +0000

I am preparing to install a EVO-NIST1 (with T Harness) on a 2012 Infiniti M37 and have a question concerning the proper pin positions on the Driver Door Connector for the (-)Unlock and (-)Lock signals.

Your instalation guides provide conflicting information for the (-)Unlock and (-)Lock signals.

For the Driver Door Connector your guides list Pin 14 (green) for (-)Unlock and Pin15 (Red) for Lock. The diagram of the connector next to this description highlights pins 15 and 16 however.

The Wire Color pictures for the M37 show a similar looking connector but put the red wire in the position that would be Pin 15 (but they call it pin 109) all but the pin number agrees with your guide.

However the wire color picture shows a Green (-)Unlock wire going to the position that would be pin 16 (they lable it as pin 111). This differs from the pin 14 listed in your guide.

I found another wiring diagram for the M37 that is somewhat unclear but makes it appear that (-)Unlock should be pin 16 and (-)Lock should be pin 15.

What are the correct connector pin positions for the (-)Unlock and (-)Lock signals?

Guides: 32791 and 12671