Questions & Answers - Recent questions tagged hyundai-santafe

2007 Santa Fe refuses to learn immoblizer EVO ONE

Tue, 30 Dec 2025 19:10:03 +0000

Trying to Pair immobilizer to evo one on last step and refuses to learn and flash yellow light, TImes out after about 15 minutes and flashes red.

It did learn before when temporarily hooked up, Checked wiring and all is correct. Reflashed firmware and reset module with alternating lights.

Getting proper can Voltage on both wires at Evo connector and all other pats wires

2014 Hyundai Sante Fe Evo One Lte. factory remote

Fri, 29 Dec 2023 17:10:48 +0000

Hello, I installed Evo One Lte in my 2014 Hyundai Santa Fe Sport PTS. The Evo start works great via the Cell app but i cant get the factory remote to start the car. Also, the cell app WILL NOT operate the door lock/ unlock. The list says 3 locks will start and stop remote start, but i cant get it to work. Not sure if its my fault or If factory fobs will not work on this vehicle

Any help is greatly welcome !!!! THANK YOU ALL VERY VERY MUCH

IS there a T harness for 2014 Hyundai Sante Fe Sport Push To Start?

Thu, 21 Dec 2023 19:59:43 +0000

Hello, is there a T harness for 2014 Hyundai Sante Fe Sport Push To Start?

Did not see one but wanted to double check.

Thank you for your time.

2015 Santa Fe no response with 3x lock

Mon, 06 Feb 2023 14:37:36 +0000

Installed Evo One in 2015 Hyundai Santa Fe PTS. All connections have been checked. Module seems to program fine according to LEDs. Yellow LED lights with vehicle in run position. No LEDs illuminate when pressing the remote buttons, and the car does not respond in any way. Tried a second unit and same symptoms.

Problem for instruction installation - 2013 hyundai santa fe evo one

Mon, 22 Nov 2021 23:21:37 +0000

Is no possible to information how installing evo one to 2013 hyundai santa fe push to start- i try on ios, google chrome, opera , iexplorer ... still no succes

can't get the Evo-One to program

Mon, 11 Oct 2021 13:01:23 +0000

I have a 2009 Hyundai Santa Fe With Standerd Key without PATS

I have the EVO-ONE With T-Harness for it.

I have fallowed the Guide # 60991 and the auto program with the flash manager for the year make and modle. i also tryed the 20.2 but no luck

I also have the RF642W RF Kit

I've been trying the Program 2 without PATS

So the problem im having is that when I go to program the Module.

I set the LED to Blue then plug in all the other plugs.

I turn the ignition to run. The Blue LED goes out and dosn't fluash.

The Blue LED only comes back if I turn the ignition off.

Also Im not geting anything when I use the remote.

I push the lock/unlock button or start button one remote LED will turn green but nothing happens.

the other remote the LED turns Red

2014 hyundai sante fe sport push start worked for 3 days

Tue, 09 Feb 2021 20:05:25 +0000

2014 santa fe sport worked for 3 days then when used today started but died once door was opened didnt do this prior 3 days now only cranks no start

2013 hyundai santa fe ignition on but no crank

Sat, 26 Dec 2020 18:54:56 +0000

Remote start is in and programmed. Evo all is programmed. 2013 hyundai santa fe push to start. Hit lock button 3 times, ignition on vehicle never cranks. I have rechecked all connections and they are good. At the end of the evo-all programming it says the red led should flash 10 times, then blue should flash fast, then red flash fast. Then turn ignition off. The red flash fast never happens. I dont know of that's related or not.

2014 Santa Fe Push-to_Start was starting fine and than stopped.

Sat, 22 Aug 2020 20:05:01 +0000

After installing the Evo-One it worked perfectly for a day. I than installed the Pink/Black Trunk release wire to Plug D pin 3 in the fuse panel. Remote start still worked right after and than an hour later it stopped working. The remote start doesn't engage the engine when I hit the lock 3 times, I just get the 3 blue LED flashes and it doesn't go red. I checked continuity on all the wires except the can bus connections because I am getting the blue LED and they were all connected. The LED flashes blue every time I press a FOB button, and goes yellow when I turn the vehicle on. Any help would be greatly appreciated, thank you for your time.

Hyundai Santa Fe 2020 Push start-Moteur éteint quand j'appuie sur le frein

Thu, 11 Jun 2020 08:24:40 +0000

Je vérouille les portes, je démarre le véhicule, j'essaie de déverouillé les portes mais je doit peser 2 fois sur unlock pour que les portes se déverouille. Quand j'entre dans le véhicule, j'appuie 2 fois sur le boutton start du véhicule et quand j'appuie sur le frein, le moteur s'éteint. Le module installé est un evo-one et le sn:002B04 026099

installed on a 2017 santa fe works once and no longer works

Sun, 29 Dec 2019 18:42:04 +0000

I installed on a santa fe 2017, I did all the programming correctly, but when I go to the forehead it only turns on once after powering the module, after turning off and trying to turn on it doesn't work anymore, so if I turn the module off and on again it works for the first time and then it doesn't work anymore, does anyone have any idea what might be going on?

EVO ONE - 2016 Hyundai Santafe - push to start - no heated seats and rear defrost

Tue, 08 Oct 2019 21:04:38 +0000

I have a 2016 Hyundai Santa Fe Push to Start.

I have installed the wiring per the install guide 34341.

Bypass options - I have enabled A4 - Heated seats - Automatic low temperature heated seats & rear defrost control.

I have saved the options to the module. i use the oem remote Lock / unlock / lock to start

The heated seats and rear defroster don't turn on with remote start.

Any suggestions? are there other wires i need to install? are there other buttons i need to push?

thanks

2013 Hyundai Santa Fe 2.0T, Push Start

Wed, 02 Oct 2019 20:15:18 +0000

Hi there, purchased used Santa Fe. Vehicle is equipped with E300 & EVO-ALL. Purchase of the vehicle did not come with Transmitter remotes. There is a FM antenna on the windshield. Safe to say there was a seperate remote other then OEM.

What replacement remote can I use? Or can I program current setup to OEM key? If not, can I replace it with new RF kit?

Thank you

What is included in EVO-ONE for Hyundai Santa Fe 2017 Standard-key?

Mon, 02 Sep 2019 18:43:41 +0000

Hi there,

If I buy EVO-ONE for my Hyundai Santa Fe 2017 Standard-key, will I get everything that is needed to have fully functional remote start system in my car?

What about those listed optional and required accessories, and optional and required technologies, are they included in the package as well? Will I be able to flash new firmware at the time of installation without purchasing additional modules and/or software from you?

Thank you,

Sergei

white plug ignition 3

Thu, 31 Jan 2019 21:51:56 +0000

2018 hyundai santafe key start using guide number 83381 and there is no white plug above the fuse box only a yellow plug and a white plug that shows the red wires no correct plug as per the guide for wires A17 - A18 any assistance appreciated

2009 Santa Fe doesn't crank

Thu, 03 Jan 2019 17:14:19 +0000

I have installed the EVO-One in a 2009 Hyundai Santa Fe using guide # 18501.

Based on the pictures/information from WireColor, I added the wires for Lock,Unlock,Arm,Disarm,Horn,ParkingLights.

I'm using an RF641W kit. I can lock/unlock the doors with the RF641W remote. When I try to start the engine, the dash and parking lights turn on. There is a click in the engine compartment, but the engine doesn't crank. The dash lights go out, and the parking lights flash once.

It looks like the T-Harness must connect the White Wire from the main EVO connector to the 2nd Accessory power line on the Key connector. Is this needed?

Any suggestions?

Thanks in advance.

Hyundai santa fe sport 2017 take over not working

Fri, 12 Oct 2018 00:56:16 +0000

My vehicle remo My vehicle remote start normal ( oem keyfob). But after remote start, I press unlock on keyfob, the door not unlock ( parking light flash 2 times). So i press unlock on door. After entering the car,(OFF led is bright) I press twice Start button, On led not bright but vehicle still move. Please help me Thank

updated: i known my issue ,the voltage at CAN BUS when IGN ON as below:

can1 high~5.0v

can 1 low~0v

can 2 high ~2.5v

can 2 low ~2.5v

please help me fix !!!!

HVAC doesn't turn on when 2017 Santa fe is remote started

Fri, 27 Apr 2018 21:08:16 +0000

I did an install a year ago on a 2017 Hyundai Santa Fe Push-To-Start last year. When the vehicle is remote started the digital climate control/ HVAC system does not turn on unless the you press the "Push-To-Start" button once. How do I fix this? I used an EVO-One with install guide 60181. The vehicle remote starts perfectly but climate control does not turn on. Please help. I did the install in November 2016, is there an update I can flash that will control it through the CAN?

Hyundai Santa Fe 2017 - how to disable the horn

Thu, 16 Nov 2017 08:28:57 +0000

How can I disable the horn when I'm using my remote starter model FTX75?

I don't want to disturb my neighbours...

Thanks,

Eric

evo all ne demarre plus santafe 2013 sans contact

Thu, 20 Jul 2017 18:15:24 +0000

Depuis la fin de l'hiver le demarrage a distance ne fonctionne plus (les autres fonctions pour locker/ouvrir les portes fonctionnent)

Lorsque je clic sur demarrage a distance, j'entend 4 click et le voyant des feux clignote 4 fois, mais la voiture ne demarre pas (aucun bruit moteur). Il ne se passe rien en fait.

D'ou peut venir le probleme ?

Santa Fe XL 2014 PTS wont start

Sat, 25 Feb 2017 14:49:24 +0000

My Evo-One flashed to the latest firmware and programmed, however I can not remote start the car. Changed different options but no result. Could you help, please.

evo one wont program 08 santa fe

Sun, 11 Dec 2016 18:44:56 +0000

evo one wont flash the blue light when i turn on the key. i have 2.3 volts on each can bus wires.

Sièges chauffants - dégivreur arrière Santa Fe Sport 2017 Ultimate

Mon, 03 Oct 2016 09:15:35 +0000

Bonjour,

Je vais d'acheter un module EVO ALL et j'aimerais savoir comment installer les options pour activer les sièges chauffants et le dégivreur arrière. Merci

2013 hyundai santa fe limited 2.0T

Fri, 23 Sep 2016 05:50:59 +0000

Good morning !

i have the hyundai 2013 santa fe limited 2.0T,it was not in the wiring list.

Can u tell me is it same as santa fe or santafe Xl wiring?I'm going to use EVO_ONE,on the bypass setting

i'm only need to set:A3,D6,D2 to be on?on the RS side: 2.1,4.1,14.1,21.1,38.2.

are there any guide for these setting?TY

Have a wonderfull weekend !

Santa Fe 2016-Not able to program evo-all

Fri, 16 Oct 2015 12:51:32 +0000

Perform evo-all programmation procedure but when I put the ignition to on, the evo-all freeze with the red light on if it was on when I turn the key or the light is off when I turn the key(Firmware vr.; 76.17)

2015 Santa Fe XL push start alarm goes off when door is oppened and auto start running

Tue, 21 Apr 2015 11:33:02 +0000

First used diagram for santa fe sport pts found found evo- all had to be updated as could not get any hood switch or foot brake signal, then doors would not unlock , connect door lock and unlock wires, now that all works but alarm goes off when doors opened and autostart running

Santa fe XL limited 2015 push start no wiring info

Tue, 07 Apr 2015 13:19:36 +0000

I don't see the info for push start vehicle's

evo one door locks 2008 santa fe

Sun, 05 Apr 2015 10:41:44 +0000

When programming the evo one on my santa fe the door locks do not program, it goes straight to foot brake and tach ( red light flashes 10 times ). The door locks will not work with the provided FOBs. Does this mean the door locks are not on the Can bus? if so do i need to hook up the door locks direct from the module to the cars harness?

Hyundai Santa Fee XL 2014, bypass delay?

Tue, 03 Feb 2015 12:33:01 +0000

I noticed that it takes longer started with the remote starter with the key. We can see that there is a time for the transponder bypass, while the starter crank. Also, my EVO-ALL has lost its programming after 2 month. I had to reprogram it. Have you heard of any problems like that?

Thank you

Santa Fe 2015 push start- no wiring info?

Wed, 28 Jan 2015 10:07:18 +0000

Looking for this wiring info for at least 1,5months. Is it safe to use the same has the 2014 or should I wait for the 2015 wiring info to come out?

2003 hyundai Santa fe

Fri, 09 Jan 2015 07:32:02 +0000

Are there other solutions for bypass on a 2003 hyundai Santa fe? I am installing a remote start in this vehicle and the vehicle search only brings up the "evo-one". The customer does not want the "3X lock" start. Surely there must be a way to use the evo-all? Thanks, Mike.

Park lights flash 4 times, but sante fe will not start

Wed, 07 Jan 2015 15:41:25 +0000

Purchased a pre-owned 2010 sante fe. It came with a Fortin remote start keyfob. When fob's remote start button is depressed, the park lights flash 4 times, but vehicle will not start. Lock/Unlock functions are ok.

I have no manual for this, so I do not know what the flashing lights are indicating. No service companies in Calgary (so far) are able to help me with this.

Any assistance would be greatly appreciated.

Brian

Calgary/AB

2009 Hyundai Santa Fe with Evo-all and Crimestopper RS7-G5

Mon, 05 Jan 2015 23:50:45 +0000

I am planning to install remote starter in a 2009 Hyundai Santa Fe and want to combine Evo-all with a Crimestopper RS07-G5, but have a few questions before I proceed:

a) As you can see from the picture below, (~)Data wire in pin 6 is absent. Does it mean for SURE that the car is not equipped with an immobilizer bypass?

b) Will I still need to tap to Door Lock/Unlock wires from RS07-G5 harness or Evo-All CanBus will take care of doors Lock/Unlock?

c) How will Evo-All be powered?

d) According to Connection 13 of the Evo-All guide (page 18 of 46), I will need to connect Black wire=>Foot Brake status, Pink wire=>Tachometer and Dk.Blue wire=>(-)While Running to corresponding wires on the Crimestopper Unit and Yellow Wire=>Car's Ignition. Does it mean that I will not need to use any other wires on the RS07-G5 unit if I interconnect these two with a Data-Link Cable?

Thank you in advance,

Michael

Evo-all and Santa FE

Thu, 27 Nov 2014 20:16:40 +0000

On a couple occasions now i have used an Evo-all on a santa fe only to have it fail during programming (2 red flashes) is there a reason why the evo wont program? or a way to tell if it's incompatible? on both occasions i used a competitors module and it programed fine.

Programming / configuring evo one for 2014 Hyundai Santa Fe push to start

Sat, 22 Nov 2014 16:54:38 +0000

I am having an issue configuring the EVO ONE as a remote starter for the 2014 Sanata Fe push to start. How do I know what options are needed and which I do not. I'm pretty sure I have the key bypass portion programmed. Is there a list of Items somewhere that would indicate what I do need to have enabled and what I don't?

EVO-ALL as standalone on 2011 Santa Fe with key

Tue, 19 Aug 2014 09:57:41 +0000

First, is it possible to use the EVO-ALL as a standalone on this vehicle?

I am about to install this once the product arrives. I read in a previous question relating to the PTS model (mine is not) that the lock/unlock remote functions no longer work after the vehicle is running. Is this specific to PTS or will it affect the regular key model as well? Has the issue been fixed? If not, I take it I will need to use the key to unlock and possibly set off the alarm?

Also, if I currently press the lock button twice the horn honks. Can I bypass this on install (as I will need to push the lock button 3 times to start) or will my horn honk every time I start the vehicle?

Leaving at 4am in a housing project with only outdoor parking, I don't want to annoy my neighbours each morning when I start my vehicle.

Thanks.

2013 Santefe Reg Key Can 2 high/low better wire location

Fri, 07 Feb 2014 10:46:11 +0000

The can 2 High/low wires that are listed in behind the fuse box can be found in the drivers kick panel much easier

https://plus.google.com/112123723681468889737/posts/GYzA5XNKhwa

2012 santafe auto start,evo all, make lock-unlock work while running

Fri, 31 Jan 2014 19:26:23 +0000

12 santa fe make locks work while running auto start .evo all..

What interface is needed for a 2014 Hyundai Santa Fe?

Tue, 07 Jan 2014 13:26:49 +0000

Can I use an EVO-ALL to do a car start on a 2014 Hyundai Santa Fe?

Thanks,

Steven D