/en/qa/tag/int-sl-pl Powered by Question2Answer /en/qa/74934/led-does-not-flash-during-programing-2005-pontiac-g6 I am using the int-sl+ with compustar cs800s. All of the compustar functions work with the datalink connection through the int-sl+. When I hit the lock button on the cs800s remote, the LED on the int-sl+ flashes once, but when I turn the ignition key on it never flashes. I have the purple/white data BCM wire hooked to the keyless data wire at the bcm. I have updated the int-sl+ to version 3.06. I have checked for 12v on the pink ignition wire and have it. From the cs800s remote the doors lock/unlock, the trunk pops, and when you try to remote start the fuel pump, dash lights, blower motor all come on. Just no crank and start. To clarify programing the int-sl+, I push the program button and plug in the datalink connector, then release the button. The LED comes on when I connect the datalink. Then I connect the white connector. The LED stays on. Then I push lock on the cs800s remote. The car locks and the LED goes off. Then I turn the ignition key to on and nothing happens from there. Pontiac /en/qa/74934/led-does-not-flash-during-programing-2005-pontiac-g6 Mon, 19 Dec 2016 12:24:46 +0000 /en/qa/21003/is-the-avital-4103-compatible-with-fortin-int-sl I purchased an Avital 4103 and a FORTIN INT-SL+. The D2D cable from FORTIN does not fit the 4103. Am I going to have to use W2W? Or is there a way to utilize the D2D with the 4103?<br /> <br /> &nbsp;<br /> <br /> (2008 Chevrolet TrailBlazer) Chevrolet /en/qa/21003/is-the-avital-4103-compatible-with-fortin-int-sl Sun, 12 Oct 2014 23:11:08 +0000