Questions & Answers - Recent questions tagged jetta

Module reset

Fri, 21 Nov 2025 22:10:25 +0000

Can I get my module reset accidentally screw up my key data sn number 001A07304628

brake wire causing no start?

Tue, 24 Jan 2023 12:04:22 +0000

Having issue with starting it lights up, brake lights come on like its going to start but stops without cranking says "brake" on LCD On dash, and evo stays lit with orange light or lights , if i put a stick on the pedal and hold brake pedal down as i try to remote start, it works fine

2014 VW Jetta
FORTIN EVO-ONE W/
VWT1 T HARNESS
DATE 12/2021
s/n 002b04248922
firmware remote start = 1.[26] hardware 7.0
BYPASS = 75.[41]
hardware 4.0
using spare key
loaded suggested options on both with diesel option checked

I talked to 1 of your techs today on the phone about it not starting at brake and he said there may be another black & red wire for the brake but after looking at the factory wire schematic & taking the plug down again and physically looking at it, there is only 1 red & black but there is a {black& violet} & {black & yellow} after the brake switch on the schematic, so im thinking going to one of those? at this point ive tried everything else i know to do.
i watch the lights on the evo as i hit the remote start it goes through all 3 lights then after stays on 2 orange lights or 1 glowing over to look like 2? and still says "brake" on the dash as its trying

brake lights come on as its going through the process of trying to start also

so it looks and acts like its going to but fails, checked every connection with my fluke meter also, everything is wired correctly only wire in question i suppose is the brake
and i dont care about having to press on the brake pedal so if there are wires to connect or cut to just do away with this feature im all for it to get this project done

P.S. I never did get a blue flash after plugging in all the plugs and turning on ignition, just lights turned off so dont know if thats normal and not mentioned in the guide? or if something is still wrong?

thank you!

NO FLASHING BLUE LIGHT AT STAGE 5

Thu, 19 Jan 2023 20:45:29 +0000

2014 VOLKSWAGON JETTA TDI AUTOMATIC TRANS
AFTER REPROGRAMMING EVO ONE 3 TIMES STILL CANT GET THE EVO ONE BLUE LIGHT TO FLASH AFTER TURNING ON IGNITION, BLUE STAYS LIT THEN WHEN IGNITION IS ON LIGHT GOES OUT UNTILL YOU TURN IGNITION BACK OFF THEN BLUE LIGHT COMES BACK ON?

FORTIN EVO-ONE W/
VWT1 T HARNESS
DATE 12/2021
s/n 002b04 248922
firmware remote start = 1.[26] hardware 7.0
BYPASS = 75.[41]
hardware 4.0
loaded suggested options on both with diesel option checked

2012 Volkswagen Jetta Sportwagon TDI Remote Start Option(s)

Sun, 23 Oct 2022 14:51:15 +0000

Looking to see if there is a system I can order for my 2012 Jetta Sportwagon TDI. This is a standard key vehicle. I think countries other than the US called this vehicle a Golf Sportwagon, but I could be mistaken.

2012 VW Jetta sportwagen keyless , remote start

Tue, 11 Oct 2022 11:22:22 +0000

I need to know what remote start works that has longer range and does not need a key fob in the car.

2006 VW Jetta tb-VW

Fri, 29 Jan 2021 20:20:11 +0000

i used tbVW with evo-all and it programmed properly but works sometimes and others it doesnt. I cut the green wires short as i could and even twisted the pair together. Is it more acurate to connect closer to key cylinder than down the column? and tips would be helpfull thanks

EVO-ALL THAR-VW3 TB-VW Issues

Mon, 11 Jan 2021 05:38:14 +0000

2012 VW Jetta (Gas) Key Start

EVO-ALL
THAR-VW3
TB-VW

Everything was soldered! Programmed good but it didn't remote start at the first time but the it auto tried the 2nd time, started fine this time and a few times after.. client took the car home.. all good..

1 week later, got a call from the client saying that the remote starter is not working and also wont start normally wiith the key. The only way they got it started was they unhooked the battery and replug it again.

The next day, got another call and client said that the vehicle stopped while driving.. they pulled over and waiting a few minutes and the vehicle started again but engine light came on. Took it to a shop and scanned codes:

Code: B104C29
Description: Key - Implausible Signal
State: Passive/abiogenesis

Code: 00474
Description: Anti-Theft Immobilizer System Control Module
State: No Signal/Communication

I got the vehicle back into the shop.. replaced the EVO-ALL.. double checked all my connections and even used the opposite side of the transponder wire pair.. soldered it and made sure that the TB-VW wire config is going the right way.. programmed fine but now the vehicle remote starts fine on first try!

Guess what.. client called back again after a few days with the same no remote and key start issue.. battery unplug and replug make it work again,

Got the vehicle again and now ths time.. i actually replaced the THAR-VW3 and the TB-VW. Its been 2 weeks now and client hasn't called back yet..

Now... i have to figure out if the T-Harness will cause no start, stall and engine light codes

D2D Cable

Thu, 29 Oct 2020 21:05:43 +0000

Hi, I ordered EVO RS (EVO-VWT3) that comes with T-harness and the module + TB-VW.

Also in the package I noticed I got a D2D Cable Black-White 4 pin conector. I am installing this on Jetta 2011 Key Automatic No key required, using OEM key to start.

My question, in the diagrams I do not see where I plug this D2D conector, is it for diffrent use? Please clarify.

Thanks

2008 Jetta, will the tb vw work?

Thu, 14 Nov 2019 10:49:12 +0000

It says beta, I'm new to Fortin, does that mean it will possibly work?