Questions & Answers - Recent questions tagged led

RFK942 antenna LED not blinking

Tue, 09 Jun 2026 09:43:13 +0000

this morning I notice the LED on the antenna was not blinking at all, it was last night when I locked the car. does it stop blinking after a specific time? I unlock and relock the car and LED start blinking.

2020 Honda HRV - Stuck on Flashing Red Light

Mon, 24 Nov 2025 03:12:33 +0000

Hello,

I am trying to install the Fortin Evo-One into a 2020 Honda HRV (standard key), however I am unable to get past step 5 of the programming process. When I go to program the Evo-One, I am able to get to the blue/red blinking light step, however once I turn the key to ignition position the Evo-One blinks red. I am using the EVO-ONE-HON2 T-harness. I have tried the "FAQ: RED LED STUCK ON" method mentioned in another post, but unfortunately that did not work. Any help would be greatly appreciated.

Audi 2013 S4 DSG - Fortin ALL getting stuck on step 7 with 3 x red flashing lights

Fri, 22 Dec 2023 11:16:42 +0000

Just installed a Fortin ALL with the Audi T Harness on a 2013 Audi S4 DSG. UK right hand drive car.

When I go to try and get the unit to read the key data I am just getting 3 red light flashes on step 7, everything is fine up until that point and the car operates as normal.

When I then put the flashlink back onto the PC software it says invalid key data. Any ideas? I have checked all wiring, also checked status of CANBUS with zero issues showing so I know that wiring is good.

Serial no for module is : 001A07445150

RFK942 Remote LED

Tue, 05 Apr 2022 21:34:24 +0000

When I start my G37S which uses the RF642W remote, the RF642W remote's green LED flashes once every six seconds when the car has been started remotely. On my Q50, which has the RFK942, when the car has been started remotely the LED of the RFK942 remote flashes once every 10 seconds. My question is, is there is a way to change how often the LED on the RFK942 remote flashes? This trivial and certainly no "deal breaker" since I do preferrer the RFK942. I was just wondering.

Rfk 912 antenna

Wed, 08 Jul 2020 18:15:39 +0000

I have rfk912 kit with antenna, the antenna led usually gives blue light, but sometimes specially when the car is left for a while , when i come back i find it very faint red color? What does this means ?

Can not get past step 6 no blue light in step 7

Sat, 01 Feb 2020 17:05:21 +0000

I have a 2010 ford escape. auto trans and 6cyl engine.

I can not get the blue light to light for step 7. Checked all the can connections and even solidered them. they are correct as the instructions ask them to be.

HELP?

Can not get past step 6 no blue light in step 7

Sat, 01 Feb 2020 17:05:21 +0000

Antenna light blinks constantly when truck off and locked

Wed, 22 Jan 2020 19:58:18 +0000

Installed the Fortin evo one 442 kit with antenna, is the antenna supposed to blink constantly blue when truck isn't running ?

Mazda Failing Decryption process (not able to get a solid blue)

Sat, 11 Jan 2020 15:59:49 +0000

I have tried to run the exact process for initializing decryptor for a CX-9 install, starting with diconnecting the neg battery terminal and then connecting the steering wheel white terminals into the T harness,reconnecting battery power and then holding down the button on the Evo one module while plugging in the 6 pin connector. I have not been able to get the module to set the blue solid light. Anyone run into this?

Module was programmed correctly via flashlink

Can'y get blue solid blue led

Fri, 11 Oct 2019 23:13:17 +0000

2006 chevy uplander evo one can't get solid blue led in step 1 programming

Can'y get blue solid blue led

Fri, 11 Oct 2019 23:12:06 +0000

2006 chevy uplander evo one can't get solid blue led in step 1 programming

No blinking blue light when programming in step 4 of install guide for a 2018 Mazda CX9.

Sun, 21 Oct 2018 17:19:51 +0000

I bought the EVO-One and the THAR-ONE-MAZ3 T-harness for a 2018 Mazda CX9. I got the t harness installed fairly easy but am having trouble programming. I hold the programming button while I connect the 6 pin main connector, release when the blue light is solid, connect the rest of harness, press on 2x but the LEDs never flash as instructed. I'm not sure how to proceed from here, I've reset the module and tried a few times. The 20 pin connector has a bunch of lose wires on the t-harness, should this be connected to anything? From my understamding only the optional parking light wires needed hardwiring, everything else was plug and play.

No LED's on unit after initial install

Sat, 19 Nov 2016 12:58:56 +0000

I completed all the intall wiring on my evo one on a 2007 mitsubishi eclipse, updated the bypass and remote start and when I plugged the unit in, I didn't see and LED's light up at all. Tryed to program the bypass, no LED's. removed the unit and tried to check the programming on the unit and it all seems to be fine. Looked in the Questions on the support site, and found that perhaps a master reset needs to be done. I can't seem to get any response from the unit on the car to do anything so I can't get into the programming mode to reset and can't get the red light during the master reset. What can I do?