Questions & Answers - Recent questions tagged lock

Factory key/fob wont lock or unlock while remote started

Thu, 19 Mar 2026 18:23:48 +0000

2010 Honda fit sport. Evo One with Hon-One t-harness. Remote start works great, but oem key w/ fob won't lock or unlock while car is remote started. Lock and unlocks normal if not running.

Issue with lock/unlock external input control signals

Mon, 13 Oct 2025 20:36:17 +0000

I have a 2011 VW Touareg and have installed an evo-all unit with the t-harness. Everything seems to be working ok but need help with pins a2 and a3. When providing a negative pulse to a3 it cycles the ignition on for a few seconds and turns off. It does unlock the doors but not sure why the ignition turns on. The lock wire seems to function normal. Is this a setting that needs to be adjusted ?

2006 infiniti g35 wiring diagram not specified

Sat, 28 Dec 2024 20:53:19 +0000

Good day all

I looked into vehicle finder for a guide for a 2006 infiniti g35 interlligent key. Fortin website gives me guide#78031 or this link https://cdn02.fortin.ca/download/78031/EVO-ONE_IG_REG_BI_NIS-G35-PATHF-ALT-MAX_KEY_A_78031.pdf

when i look at the the connection. It only gives me a connection to a pathfinder and altima/maxima.

my question is. Do i follow the connections for the maxima/altima since they are the counterpart of G35?

Also notice the lock and unlock wires are both going to an empty pins? How do you tap that wire? Do i need to get pins for that plug?

btw, im gonna be using evo-one with rf642

thanks in advance guys!

Can't find lock/unlock wiring

Sat, 02 Nov 2024 20:03:16 +0000

Working on a 2010 Chevy Traverse, photos show the pink and orange wire at the Bcm but it this situation those wires aren't there, I try to find some others but can't yet.. Evo RS4

Door lock & unlock while engine running

Tue, 15 Oct 2024 17:06:43 +0000

Hello dear,

2023-2024 Toyota Camry

Push to start - gas engine

Fortin Evo all - TOY13 harness

1- I have seen many videos for Toyota Camry with remote starter installed able to lock & unlock doors while engine is running. However, my car is not doing that. Could you help for that ?

2- Also, some cars able to lock door when shifting to D / unlock doors when shifting to P. Is it possible with Fortin evo all?

2006 chevrolet impala using evo-all stand alone install - no lock/unlock and accessory connection

Fri, 20 Oct 2023 21:04:28 +0000

Hello all,

good day. Just wanna ask if i do the evo-all stand alone install with rf642 on this 2006 chevy impala, will the lock and unlock and accessory work through the vdata cable? Without physical connection?

i experienced this with a 2007 nissan xtrail, it has a data connection but lock/unlock doesnt work. I had to physically find and connect them. (Using. Evo-one)

thanks in advance.

EVO-ALL and CarLink CL6 Wiring

Sun, 20 Aug 2023 01:14:09 +0000

I installed EVO-All using THAR-For4. Then i added Carlink CL6 into it. Remote start stop, battery health, and gps features worked right away with no issues but Carlink App also has 4 Auxilary options, heated seats options and lock/unlock options. I read on Fortin that my THAR-For4 shuold be enough to use lock/unlock feature on CL6 but it does'nt work, So I guess I have to open the kick panel and split wires there. I paid $5 for wirecolor.com subscription token to see if I can find wiring help but its created by a 5 years old so thats ok.

My question here is how to I connect heated seats to EVO-All and is there any way to add climate control to one of those auxilaries showing in the app (add it to evo then use auxialry to control it). If I can get wire colors and location of wires I can work with that. Thanks

P.S. I have evo flash tool and I checked my lock/unlock options are on in the Evo-All settings.

Will it unlock/lock if I use a smartphone add on?

Tue, 25 Apr 2023 22:26:59 +0000

Eco-chrt4 on a 2011 grand caravan. If I use a smartphone add on module will I be able to lock/unlock the vehicle using the app? Asking since I noticed that it's only connect to can-low can-high through the ignition using the T-harness

It says to put lock and unlock wires in empty pin spots in BCM plug??

Thu, 29 Dec 2022 13:14:06 +0000

How do i put wires into empty pin slots in BCM plug

Driver door unlocks after engine starts Subaru outback

Sun, 25 Sep 2022 20:28:56 +0000

Just installed t harness on 2016 Subaru outback and after engine starts it unlocks the driver door

2017 subaru forester Doors unlock but do not lock

Tue, 28 Dec 2021 19:24:30 +0000

Vehicle: 2017 Subaru forester w/ standard key

Equipment: evo-one + rfk442 + THAR-ONE-SUB1

Issue: rfk442 lock button chirps and gives a green light, but does not lock the doors. I can hear relays clicking from the evo-one during this. OEM remote lock button works. rfk442 unlock does work.

When remote started, the doors unlock but do not re-lock despite remote start option 6 being set to 6.2.

How to hook up wires for lock and unlock

Fri, 17 Dec 2021 20:52:40 +0000

Purple and purple white wires

02 avalanche evo one

Wed, 10 Nov 2021 10:20:30 +0000

I have an 02 avalanche with evo one installed. Locks are hardwired with relays in line, when I lock the truck, I get 3 flashes from parking lights and 3 chirps from siren. I'm guessing it is something with that system not recognizing the lock pulse. Is this correct or could it be something else?

Setting up the module.

Mon, 27 Sep 2021 03:09:16 +0000

2017 INFINITE Q70.

The first task to set up the module.Press and hold Insert the programming button:the 4-Pin (Data-Link)connector.

The Blue, Red, Yellow andBlue &Red LEDs will alternatively illuminate.It should work, but blue, red, and yellow

led blink at the same time.

The wiring work is normal.

I want to know what's wrong with it.

Nissan Qashqai 2019 Steering Lock Plug wiring

Fri, 13 Aug 2021 10:03:31 +0000

I have successfully installed standalone evo one for nissan qashqai 2019 with push to start When i remote start the vehicle and then enters inside it then when i press the Ignition so i can start diving, car refuses to accept ignition saying steering is locked and doesnot allow car to be on the ON position I have tried enabling door shutdown option and it actually shutdown car when any door is opened So in the current setup , i have to press brake after entering then it shutdowns then i start it normally again I saw something about steering lock plug connector but i donot know which wires in the A plug harrness to connect to ? I have a white/green wire but there is no white/red Please assist me as i want to start driving directly after entering the vehicle

2002 avalanche evo one lock/unlock

Tue, 27 Jul 2021 23:43:42 +0000

i have just purchased an evo one system and will be installing soon. i understand that it will remote start via lock, lock, lock from factory fob. if i want to add a rf kit at some point, do i need to wire the evo system to the door locks?

Connecting Lock/unlock wire

Mon, 19 Apr 2021 19:30:08 +0000

2014 Mustang automatic. Connecting lock/unlock wire is missing on installation guide. So( pressing lock-unlock-lock on factory remote), i am just wondering what commands fortin unit to do remote start with no lock/unlock wire connection??

Camry 2011 Driver Door unlocks itself after remote start activated 1 minute

Tue, 02 Mar 2021 19:16:53 +0000

I have a Camry 2011 with keyless entry (standard key). I am having an issue with my driver door keeps unlock itself after remote start activated 1 minute. I have EVO-One (SN: 002B0147175) firmware 79.59 installed with T-Harness. I have spent 5 hours to look for a soluation to fix this problem, but no luck yet. Please help me. Any suggestions, it would be helpful. for firmware flashing, I have reached to the limit :(

Does the evo one have an auto lock when I walk away setting for the 2017 Lexus NX200t?

Tue, 09 Feb 2021 18:53:53 +0000

I'm looking to install the EVO One on my 2017 NX 200t, does it have an option to auto lock after a certain time or if I walk away? Also, do I need anything else to be able to control it with my phone?

3 X Lock engine start on 2001 lexus ES300

Mon, 25 Jan 2021 07:19:54 +0000

Working on a 2001 Lexus ES300 and using guide #58481. Is there an updated version of the software which will support the 3 x lock to start the car without using an additional fortin remote kit?

Thanks.

Unlock/Lock signal is in reverse

Sun, 17 Jan 2021 14:46:27 +0000

2011 Infiniti M56. I have the evo all module set for the doors to lock once the remote start has completed. It unlocks the doors instead of keeping them locked. When I lock or unlock the doors while it is in remote start mode they do the opposite of what is commanded.

Carlink ASCL6 EVO-ONE HOW TO LOCK AND UNLOCK DOORS

Sat, 02 Jan 2021 21:56:04 +0000

Hi, I have installed EVO-ONE AND ASCL6 Carlink on my 2018 Subaru Outback Limited Push to Start , everything works the Carlink does remote start and shutoff the vehicle, but it won't open or lock the doors. Do I need to connect additional wires for it to be operational or program EVO-ONE in a Flash Link app?

EVO-ONE - 2020 Elantra Standard Key Manual Trans - Strange Lock/Unlock Behavior

Thu, 17 Dec 2020 20:13:52 +0000

Using an EVO-ONE with the THAR-ONE-KHY2 harness and RFK942 kit. Everything works except when the unit sends a lock or unlock command on the can-bus it looks like the BCM momentarily loses power in the middle of the lock/unlock pulse. The locks will do a quick double pulse (as in power being lost in the middle of the normal pulse) and you can see the dome light do a quick flash and the OEM hazards flicker for a moment.

If the ignition is on and you press the lock or unlock button you can actually see cluster show a FUSE error along with some other warning lights that flash quickly during the "blip" of lost power.

The interesting thing is when I enabled driver door priority this doesn't happen during the first unlock pulse.

It's not the RF kit since it does the same thing when you do a remote start, you can hear the locks going haywire along with the dome light/hazards flickering for a bit just before it starts up.

Tried different firmware versions with the same results, not sure what else to try other than disabling lock control through the canbus and hardwiring it.

EVO-ONE-942 2006 Chevrolet Trailblazer

Thu, 15 Oct 2020 05:50:01 +0000

Is EVO-One & RFK942 compatible with 2006 Chevrolet Trailblazer? Trailblazer has powerlocks/windows but never had keyless entry avtivatied in BCM from Chevrolet. If compatible what all wires needs hooked up on 20 pin connector for keyless entry & remote start to work properly? Any wires need hooked up from 20pin connector to 6pin bypass relay? Should this be programmed with alarm with no other alarm items added to vehicle other than original factory items?
Thank-You

Purpose of the Lock/Unlock wires in the For1 T Harness install diagram? Evo-One now pulses lock/unlock twice..

Wed, 24 Jun 2020 21:09:34 +0000

2010 Ford Edge. Car unlocked/locked from my Evo-One without issue before installing the lock/unlock wires that the guide called for. Now the car double locks and double unlocks. Is there a reason these were connected? If not, Is there a way to unprogram them?

Unlock button pulses 2 times & lock pulses 2 times

Sat, 06 Jun 2020 12:48:03 +0000

Vehicle: 2015 Chevy Tahoe Standard Key
Fortin Evo All w/ THAR-GM7 and RFK442 and LinkR LT

I've made sure double pulse is NOT on, but every time I hit the lock button on the RF remote or through the LinkR LT app the vehicle will lock 2 times and when I hit the unlock button the vehicle will unlock 2 times. I can't figure out why it's doing this... everything else is working good...

EDIT:

I tried reprogramming the car/evo-all and selecting the option in the instructions for a vehicle WITHOUT OnStar (my Tahoe is a Police version and has the OnStar mirror/button, but some Police Tahoe's don't come with OnStar so I'm not sure if that's indicative of it having OnStar) anyways, the vehicle now locks correctly (1 tap of the lock button locks the car once) BUT when I press the unlock button the vehicle turns to the ON position (dash lights come on but the vehicle does NOT start the engine) and then the vehicle turns OFF and the doors unlock once... So I am not sure what this means or if this helps anyone to figure out the problem.

EVOSTART2 thinks 2017 Sierra is unlocked whem oem remote locked it and vise versa for lock

Fri, 17 Jan 2020 23:58:04 +0000

Evostart2 doesn't know if truck is locked or unlocked unless done so by app

Can you unlock

Wed, 15 Jan 2020 13:45:05 +0000

Evo locked i guess programed to many times i just got it from amazon how can i get it unlocked

ftx 64 remote will not unlock 2013 f150

Tue, 07 Jan 2020 01:11:57 +0000

Ive installed the evo all with the t-harness and the ftx 64 remote. I can remote start the truck with the fortin remote. The module locks the doors after the remore start. It monitors the door pin. It will shut the truck down with the fortin remote. I can un lock the doors with the fortin remote but the truck will not lock with the fortin lock button. It arms the factory alarm but does not move the locks.

2011 F150 XLT, Is the tap into pin 6 BCM required? If so, is the diode required?

Thu, 02 Jan 2020 20:36:18 +0000

I'm referencing guide 34421

Are lock and unlock trigger still needs to be applied with the disarm, immo data and data door lock connected?

Fri, 20 Dec 2019 13:15:03 +0000

Toyota 4runner 15

How do i connect a relay for the door unlock and lock for a dodge ram?

Thu, 19 Dec 2019 09:23:41 +0000

The truck is 1500 v8 2008.

Doors will not unlock after remote start

Wed, 13 Nov 2019 09:15:47 +0000

After remote start initiated (using 3 x lock on key fob), the doors are locked. However, when trying to unlock the door with the key fob to get in the car, nothing happens. I have to unlock the door by physically inserting the key and turning.

Any settings I need to change?

2013 Chev Equinox

Remote start will not activate after vehicle has been parked for several hours.

Wed, 13 Nov 2019 06:11:59 +0000

I have a 2012 ford fusion with the EVO FORT1 installed. It has worked with minimal issues for the past year and a half. Over the course of the past 2 months, it has started to malfunction. After the vehicle has been parked for several hours (i.e. overnight), the module will not trigger with 3x lock presses. However, if a door to the vehicle is opened after the vehicle is unlocked, and then closed, and then a 3x lock press is administered, the vehicle starts. After sitting for only a few hours, the module will trigger most of the time. And regardless of how long the vehicle has been sitting, if a door is opened (activating the interior lights), and then closed, and the lock is pressed 3x, the vehicle starts. Any and all thoughts/troubleshooting is greatly appreciated.

EVO ALL Unlock/Lock Output

Wed, 30 Oct 2019 15:41:59 +0000

How do I get the EVO ALL to have lock/unlock outputs like on this guide https://cdn02.fortin.ca/download/75151/evo-all_ig_tsa_bi_nis1-m35-m37-m56-q70_pts_a_75151.pdf

I am trying to do this on a 2008 Chevy Silverado without factory lock/unlock and the 642W rf Kit

OEM Remote will not unlock/lock car after remote start

Sat, 19 Oct 2019 23:46:14 +0000

When I remote start my 2016 Hyundai Tucson with the OEM remote (3x lock button) I am unable to use the remote to unlock/lock the vehicle and have to use the phyiscal key to open the door. There are previous questions about this, but I have not found an answer yet. Is it a programming option or did I wire something wrong?

lock/unlock wire in Evo all schematic GUIDE # 8431

Thu, 22 Aug 2019 16:05:32 +0000

I'm installing the Evo all in my 2008 lexus es350 but the schematic diagram is not clear for A2 and A3 wires (lock and unlock) it only shows arrows but it doesn't show where to connect them? what features these two connections add to the remote starter? Im using the module for 3x lock botton start for now but I'd like to add a RF kit later to the module later on. Thanks

detecting remote lock button when it pressed will the engine on?

Wed, 26 Jun 2019 06:21:49 +0000

is there an output wire in evo all to detect the remote lock button when it pressed while the engine on?

how can i lock/unlock doors from external trigger? is it poosible while engine on?

Wed, 26 Jun 2019 06:17:00 +0000

in installed evo all stad all on lexus gs 350 2013, i want to lock/unlock doors thrugh external trigger (purple/ white and purple), is it possible? what if the car engine on?

19' Camry STD Key - door doesn't lock after remote start

Tue, 11 Jun 2019 10:32:07 +0000

Door does not lock after remote start. Function has been disabled through flashlink manager.

EVO-ALL Doesn't lock unlock when input toggles

Mon, 18 Feb 2019 09:38:22 +0000

I have a Fortin EVO-ALL. I am using in conjunction with an Easyguard EC002 remote starter. I have programmed the EVO-ALL as a bypass and confirmed that if I press the lock button on my factory key FOB 3X the car will start remotely. I can also remotely start the car using the remote button on the Easyguard remote.

However, I am having problems with the door lock/unlock. I am unable to lock or unlock the doors with my Easyguard remote. I can see that the door (-) LOCK and (-) UNLOCK input signals to the EVO-ALL toggle from 12V to 0V when I press the Easyguard remote button, but the doors do not lock or unlock. Also, the trunk release does not work properly.

Do I have a software configuration problem? Or do I possibly have a hardware problem with the EVO-ALL?

2017 Accord "Auto" headlights, Door lock/unlock. EVO-ONE

Tue, 29 Jan 2019 17:44:28 +0000

i am looking forward to installing the EVO ONE with T-Harness in my 2017 Accord CVT Standard Key. i keep my car's headlights set to "Auto" i know the headlights will turn on automatically if i remote start the car BUT, will the lights automatically turn off if the remote start timed out or if i turned off my car with the remote?

2.can the EVO-ONE be programmed to press unlock once to unlock all doors?

3.will my car's door auto lock/unlock when i turn the key in the ignition ON or OFF?

4.will the EVO-ONE need to be re-programmed if my car battery dies or the car battery gets disconnected?

Where do i plug in lock/unlock input external control on 2008 Ford edge?

Sat, 08 Dec 2018 13:32:05 +0000

All in top

Lock/unlock for 2008 4runner

Thu, 25 Oct 2018 01:25:43 +0000

Where are the lock and unlock wires on an 08 4runner? The install guide doesnt show them. I am using the 642w rf kit. Also do the arm/disarm wires need to be hooked up and if so where are they?

cannot lock the door or unlock the door when the evo one is activate

Sun, 21 Oct 2018 18:27:14 +0000

I have an Honda civic 2017 push to start manual. I have installed the evo one. i didnt connect the parking light to the car. i have programmed the evo one with the flash link for the version of my car at the moment, i think its the version 73.27 (if it can help i have installed the fortin evo one in november 2017) and didnt touch it after that. Also i dont use the T-harness i plugged every wire to the car directly like in the installation guide.

My problem is : i can activate the remote start. but when i leave the vehicule and when i press my OEM remote to lock the door it does nothing, the car still running. i need to open the door and press the brake pedal to close the car. so i dont know why the door lock doesnt work.
ive tried to buy the evo start to control my car with my cell phone. so i have installed the evo start in my car, i programmed everything and when i try to lock the door with the app it doesnt work too. i tried to start the car, but still do nothing.

I did not plug the wire for the lock/unlock with the car (cause i dont really know which wire is it) and i dont know if its really my problem cause i read the can bus should do it.

is anyone know what is my problem, cause i cant figure out what is the problem ?

thanks in advance.

Remote start doesn't work FX 50s 2012

Wed, 17 Oct 2018 00:43:40 +0000

good evening. Need big help. I did instal EVO-ALL with T-harnes, did flash with modile to 72.34 , programm with the fob. And when time come to try - no reaction. I see module flash 3 times blue when activating remote start with OEM fob, then turning red (i think it's trying to start) for few seconds, then it' turning off and turning on again for few sec and then off. Aftger this blue light blinks 3 or 4 times.White -black wire connected as per diagramm (for my car to light blue on the back of push-to-start botton). Red connector i tried both R1 & R2. On the module A1-A11 ON, C1 & D1 ON, D1.6 & D1.10 ON, D2 ON. Do not Have any idea what next. One more thing, on White-Black wire i measured 10V when it wasn't connected, is it shiuld be like this? End when i trying to start nothing heppening in this wire, 10V always. Thank you in advance.

2011 Golf EVO-ONE w/Drone DR-5400 Lock/Unlock issue

Sun, 16 Sep 2018 22:38:02 +0000

Hello! Finally got my EVO-ONE and Drone working on my 2011 Golf manual TDI. I can get the Drone to start and stop the vehicle. I even got it to open the hatch.

However it wont lock or unlock the doors. If I hit unlock it seems to engage the ingition for a split second(gauge cluster and radio lights up) then turns off, and then the yellow light comes on. If I hit unlock again it does the same thing and then the yellow light will turn off.(The blue light does not flash at all.) If I hit lock the blue light will flash extremly quickly once but nothing else happens.

I don't want to have to keep flashing the unit and hit the flash limit because I can't change options when loaded on 0.50 RS firmware.

06 Chevy TrailBlazer LS How To Wire Door Unlock And Lock. And Start Issue.

Sun, 15 Apr 2018 00:56:45 +0000

I'm installing an Evo One with the RFkit in an 2006 Chevy Trailblazer. I cant find any information on where to connect the (-) purple lock and unlock wires. And if I need to use relays. Also the unit starts, shut down and immediatly try to restart at a longer cranking time, but never catch and stay running. On Bypass I have options A1-A11 and C1 ON everything else is OFF. On the Starter options 2.1, 1, 4.1, 6.1 and rest Off, 7.1, 8.1, 9.1, 10.1, 11.1 Off 11.4, 12.1, 13.2, 14.1, 15.1, 16.5, 18.1, 19.1, 20.2, 21.1, 24.1, Off 25., 26.1, 29.1, 30.1, 31.1, 32.1, 33.1, 34.1, 35.1, 36.2, 37.1, 38.1 Off, 39.1.

Evo-All Lock/Unlock Function

Sat, 14 Apr 2018 22:32:09 +0000

Hello,

I installed a Compustar CS6502-AS with Fortin Evo-All bypass module. Everything seems to be working fine, but i noticed a couple of strange behaviours with the door lock/unlock.

1. Whenver I press the lock button on the Compustar remote, the doors lock, then after about a second unlock and then lock again within about half a second. I am not sure if that is normal but it does not seem like it as the OEM remotes do not seem to do that.

2. Ever since I enabled Option C1 for the OEM Remote Status (Lock/Unlock) monitoring is that whenever the key is put into accessory postion all of the door unlock. Very strage. I've confirmed the two lock/unlock wires are correctly connected.

Any help or insight would be greatly appreciated.

Tom

double lock on remote start

Thu, 15 Feb 2018 19:22:30 +0000

Installed an EVO-ONE and REVO 1.1 on a 2015 Frontier. Had to lower the remote stater revision to 1.16 to get the revo unit programmed. I set function 6 (door locks) to mode 3 lock after remote start because doors were staying unlocked when it started. When I use the remote start I get an initial lock pulse and then a second one shortly after. I can not seem to stop the second lock pulse. I noticed today that there is a new t-harness guide for the frontier and it now shows tying the orange disarm wire in with the purple/white unlock wire. That wasn't on the previous guide.