Questions & Answers - Recent questions tagged mazda-6

Turn on the Idel mode

Mon, 23 Feb 2026 02:30:43 +0000

When I press the lock button three times while the car is running, the third button unlocks the door instead of locking it, even though the idle control system is supposed to lock it. The door remains open, and if I open the door without the remote, it turns off immediately. I want to lock my 2022 Mazda 6 Evo One Maz3.

Program FirsTech RF Kit with Evo-One

Wed, 27 Oct 2021 20:50:53 +0000

Hello,

I am trying to use an Evo-One with my 2010 Mazda 6 (standard key) with a Compustar G15 (1-way) RF Kit.

I flashed the Evo-One with 71.44 Bypass Firmware and 1.25 Remote Starter Firmware. I used the suggested options. Under unit options, I change the RF Kits Compatiable option to FirsTech. I've wired up the Evo-One as the Mazda 6 2010 Standard Key guide shows. I did the 2-key programming but I did not get a response at the end. The LED stayed red and no features work on the remote. I realized that I should proabably program the remote first but I don't know how. The Quick Instalation Guide has a RF-Kit Guide # of 19941 listed. When I searched for that on the fortin.ca website, I get a 404 error.

What should I do?

Thanks.

Programming Evo All stuck at step 5

Tue, 12 Jan 2021 16:14:40 +0000

Programming an Evo All for 2016 Mazda 6 push to start automatic. Using guide #62791

ive installed everything and am programming my Evo All, and I'm stalled at step 5/6. Light is blue solid, but when I hit the start button twice the ignition clicks but won't turn over. The light never turns yellow, I've started over dozens of times.

Car shut off while driving without using remote start

Wed, 06 Nov 2019 09:16:26 +0000

My Mazda 6 with Push-to-start shut off on me while driving this morning. THe strange thing is that I didn't even use the remote start. I started the car like normal using the PTS button. Any suggestions why it shut off on me. I don't feel safe drving it this way. I couldn't immediatly restart the car. Had to get out of car and start it using the remote start. EVO-ALL with MAZT1 harness.

EVO ALL MAZDA6 2004

Fri, 23 Oct 2015 22:43:53 +0000

Hi,

Im trying to use the evo all as my bypass module but I'm having some issue with the programming. It's giving red and yelow led if I put the first key (ignition on) and when I unplug it turn red and turns red (blink once) for my second key. When I tried to start it as per instruction, it just turn on the accesories but no start and shut down within 3 seconds. I followed the connection 1 as my wiring. Im using d2d as the interface. I also tried to reverse the TX and RX just to ensure but it just give me all led on after I put the last key.

2014 Mazda 6 MT, Evo-All Key Not Taking Starter Over.

Mon, 22 Sep 2014 17:03:15 +0000

2014 Mazda 6 Push Button Manual Transmission

Viper 4806 Set to Manual Transmission

Evo-All Updated Newset Software as of Sept 2014

W2W installation, Guide #4161

The bypass programs fine, Ar-35 is in place. Car is locked and ready to by remote started.

I remote start the car, unlock using Viper Remotes. Mazda Fobs are inoperatable when car is running. Get in press on the foot brake. At that moment car shuts down. I've tried various other things to prevent the car from shutting down but nothing seemed to work. Keep in mind I have removed battery from factory fob to be placed in the dash attached to ar-35. And I have 2nd Mazda fob on my persons during the take over process. Everything listed below results in vehicle shutdown

-Releasing handbrake

-Pressing Push start button

-Pressing Footbrake

I just cannot get the car to take over the starting without is shutting down first. As stated in guide, it shouldn't shut down. I followed all the parameters for a successful take over but can not get it to work.

door locks lock & unlock when diving

Tue, 31 Dec 2013 12:01:40 +0000

2009 mazda 6 evo-all one wire green & red . Have you seen the door lock .switch when diving from the evo .

I cannot get the evoall to start on 2014 Mazda 6 auto Pts

Mon, 30 Dec 2013 08:33:31 +0000

I tried the ar35 on the key Removed valet and battery first Locks work, ignition comes on but it never cranks. If i leave the other key on the car it starts but not without it I couldn't finish it at the dealership yesterday so i need to go now and get it done for them Please help 2014 Mazda 6 pts auto crimestopper rsg4 and evoall service # 001a06-222387 Hardware 6 firmware 4.18 please call pete 8609494551

How do i take the dash apart around the push-start button on 2011 mazda 6?

Fri, 20 Dec 2013 13:57:32 +0000

the push start button is below the radio and i cant seem to find a way to get to the back of the button to hook up the wires. how do i get to the plug on the back of the push start button??

2007 Mazdaspeed 6 Evo-All start for 1 sec then shut down

Thu, 05 Dec 2013 18:04:24 +0000

Start the car with the remote starter it start for one sec then shut down but accessory still on...

2007 Mazdaspeed 6 Fortin Evo-All programming

Sun, 01 Dec 2013 19:52:20 +0000

I have 2 Credit card key

I fellow the program 4 for the mazdaspeed 6 but can't seem to program the evo-all

Any help would be appreciated