/en/qa/tag/mirror-defrost Powered by Question2Answer /en/qa/100349/2011-jetta-defroster-connection-to-evo-one <div> I plan to purchase an EVO-ONE &amp; TB-VW for a 2011 VW Jetta S standard key and self-install it using the "regular install NO KEY REQUIRED" (Guide # 61511). My goal is to activate electric rear window and side mirror defrosters upon remote start.&nbsp;</div> <ol> <li> Are additional wiring diagrams available from Fortin/wirecolor.com showing the rear window and outside mirror defrost circuit connections (these may be separate circuits) for this vehicle?&nbsp;</li> </ol> <div> Per prior Fortin response to a prior question: the EVO-ONE has an analog AUX output can be set to automatically activate when temperatures are below 5C.&nbsp;</div> <ol> <li> Is that AUX output signal though terminal A13(yellow/black)?</li> <li> Is there an additional input connection to make for the vehicle's thermocouple?</li> <li> IF the rear window and outside mirror defrosters are separate circuits, does the EVO-ONE have an AUX2 that will serve the same function?</li> </ol> <div> Regarding the THAR-VW3 harness; would using the THAR-VW3 for this install still allow the AUX/AUX2 functions described above or make them easier to achieve compared to the&nbsp;"regular install NO KEY REQUIRED" method?</div> <div> &nbsp;</div> <div> Thanks!</div> Volkswagen /en/qa/100349/2011-jetta-defroster-connection-to-evo-one Fri, 04 Dec 2020 10:18:51 +0000