Questions & Answers - Recent questions tagged nissan-gtr

R35 GTR EVO-all Engine Starting but then nothing works.

Thu, 10 Mar 2022 05:26:59 +0000

Hi Team

R35 GTR EVO-all

THAR-NIS1

Installation and connection types I currently have the following set: Standalone Installation, T-harness, built in alarm

Hit the Triple lock on factory fob, rear lights turn on (no fronts) doors lock, engine starts but doors won't unlock and triple tap of the lock button does nothing. Only thing to do is to open the door which kills the motor as it should.

Key learn seems to work however at step 4 we double press the program button it flashes yellow as per the guide however instead of going solid yellow, it actually goes solid Blue, Yellow, and Red. Step 5 it pretty much does nothing because all three colors are already lit.

Step 6 blue light does the flashing and everything seems to complete successfully.

Any assistance would be hugely appreciated as we are so close but somethings up, I read somewhere that from factory the fob does nothing once the car is running so I wonder if the unit is not interrupting this factory system as it should.

Thanks in Advance

Remote push start evo all for Nissan GTR, all programmed correctly but won’t start. Break lights shows but no start?

Thu, 31 Jan 2019 23:13:17 +0000

Installed the Evo All in a 2012 Nissan GTR, everything pulgged up correctly on the instructions. Programmed key fob as it shown, went smoothly with every step. Once finished and time to start the car with the oem key fob with the 3x lock button it will not start but only the break light works? How come it did not start up?

Promblems with SmartStart with EVO-ALL in stand alone mode

Sun, 30 Nov 2014 17:04:19 +0000

Nissan GTR 2014, EVO-ALL in standalone mode and SmartStart DSM200.

The Start, Stop, Lock and Unlock all worked via the SmartStart App. However;

When Locking the car most of the time the app would receive a confirmation, back but it could take a while
On Unlock, although the car unlocks the message would say "Doors are still locked. Check overall status in the status tab"
On starting the engine there is/was a very long delay and I would say only in 50% of the cases did I receive an Engine running confirmation
The Status screen never works and we get a message that said "The response from the server could not be interpreted. If the problem persists, go to mysmartstart.com for help (31)"

Tried two different EVO-ALLs and get exactly ther same result.

The SmartStart unit was previously installed with DB-ALL2 and was working fine. After trying the EVO-ALL(s) and experiencing the problems above we put the DBALL2 back in and everything works (same car same location).

Very strange..