Questions & Answers - Recent questions tagged nissan-pathfinder

Key five Remote starter and locks will not work after transmission rebuild? Help?

Sun, 22 Mar 2020 12:22:04 +0000

I have a 2006 Nissan Pathfinder 4 x 4 LE and my pathfinder was acting up and ended up having to get a transmission rebuild done and when I went to the shop the key fob with the remote start in the door locks work when I got it back nothing works please help I can be reached at my email address at scout7011@gmail.com Or buy my cell at 717-440-7279 preferred language is English thank you for your help and consideration I really hope you guys can help me out

OEM Alarm no longer working

Thu, 13 Jun 2019 16:15:51 +0000

I installed an EVO-ALL in my 06 Pathfinder a few weeks ago and everything is working except arm and disarm. I have the unit paired with a crimesropper starter through data. There are no wires populated in the BCM for lock and unlock, so I am using the evo all to control them through CAN. The locks function, but they don’t disarm or arm the factory alarm. Is there any way to change this?

When programming why does blue light stay on when i turn the switch to off

Thu, 27 Dec 2018 19:14:35 +0000

2007 Nissan Pathfinder during programming, when i turn the switch to on the blue light goes off doesn't flash. When i turn the switch to off the blue light comes on and stays on. Nothing works? I am using a T harness

2012 Nissan Pathfinder

Mon, 30 Dec 2013 11:28:06 +0000

So after fighting with this install for the past 3 days off and on I finally figured out what was wrong with the install.

After wiring everything up and programming the EVO-ALL to the vehicle the vehicle would not consistently start. Sometimes it would work great, the next it would start for 1 second and then shut off. Initially I tried the GWR wire to see if it was somehow not working, it was fine. Next I tried hard wiring (no D2D) to see if that was the problem. It was.... sort of. You see the EVO-ALL for whatever reason was NOT outputting Tach (even in wire to wire) but was outputting Brake. Tried 4 different modules and all had the same issue. Tried various firmwares as well. Same problem.

Ultimately I ended up using the EVO-ALL to controll the Transponder bypass & doorlock only. All other features were useless and had to be wired directly to the vehicle.

So, there is no question. Just a statement.

2008 pathfinder disarm and arm wires.

Mon, 23 Dec 2013 10:38:23 +0000

2008 Pathfinder (Evo_all)

The guides for the Evo-All, connection 3, says pathfinder( white wire- disarm)and (red wire-arm)

Exactly where are these 2 wire? I looked bcm.... what pin?

Are they bigger gage wires? or little wires?

Can I use the wires in the driver door for lock and unlock?