Questions & Answers - Recent questions tagged not-working

2015 NISSAN ROUGE PTS ALARM SETS OFF AFTER STARTER SHUTS DOWN

Tue, 02 Jan 2024 14:22:41 +0000

T-HARNESS was used with an EVO-ALL. After 15min run time the vehicle shuts down and the factory alarm sets off. Is there a setting that can avoid the factory alarm triggering?

why doesn't my activation code work

Thu, 14 Dec 2023 15:15:05 +0000

says invalid code

RM 942 buttons have wrong functions

Thu, 15 Jun 2023 19:28:13 +0000

Hi，

I flashed my evo-all to match my vehicle:

* Toyota Sienna 2020

* Standalone installation

* Standard connection

* push to start

* No alarm

Flashed the evo-all to 78.70, and the antenna to 1.05 already.

The rm 942 fob could connect to the car, but the lock button opens/closes the driver side sliding door, the unlock button opens/closes the passenger side sliding door, with just one press. And the remote start button doesn't work at all.

Did I miss anything?

Thanks, Gerry

2010 VW GTI

Mon, 13 Feb 2023 20:36:17 +0000

Hi guys. I am trying to install an evo all with rfk411. The problem is that the lock and unlock works but the car doesn't start when I let pressed the button for 3 sec, nothing happens. The serial number of my box is: 001A07468752. I didnt try use w/o key cuz the guide said: BETA TESTING! Any ideas? Thanks in advance.

key wrapped over the transponder if not it doesnt works and said key not detected, like that works perfect when I press lock button x3. https://drive.google.com/file/d/1sH1vJEa6-gOl6VNTXIqeryZ-f1t5haYY/view?usp=sharing

guide I am using. https://fortin.ca/download/60741/evo-all_ig_sal_bi_vw_eos-gti-jetta-golf_2006-2009_key_c_60741.pdf

Will not start and shuts all functions of vehicle down.

Sat, 04 Feb 2023 10:23:33 +0000

Evo All installed in a 2019 Nissan Kicks was working fine for 6 months or so. Now we push lock button one time and then everything seems to shut down key fob will not function can't unlock doors etc.. enter vehicle with physical key and try to manually start with push button and then nothing happens car wont start at all, we wait 4-6 hours and then we can get in with key fob and push button start..Curios what I can do to solve this problem.

Thank You

2016 Hyundai Accent. No immobilizer. Cannot make blue light flash for can programming

Thu, 22 Dec 2022 23:02:25 +0000

I have a 2016 Hyundai accent. Have the Can wires hooked up as shown in diagram. Grey wire is reading 3.18 VDC and Grey and black is reading 2.48VDC. Plug in wires and turn ignition to on/run position and the blue light does not flash. I am using thar-khy2 T-Harness. A1 is hooked up to E5 like in diagram. Help......

Why the doorlock does'nt work on a 2014 Volkwagen tiguan

Thu, 22 Dec 2022 14:01:39 +0000

I installed an EVO-ALL with a VW-TB and a Autostart remote starter.

Everything programmed fine on first attempt, The car starts fine, brake pedal kill the engine.

The doorlock does'nt work with the remote starter. Blue light flash on the evo-all on lock, and blue light flash and a relay click in the module. Even if I ground purple or purple/black it does the same thing and no doorlock.

What could it be?

2010 VW Tiguan doesn't start.

Mon, 14 Nov 2022 19:19:26 +0000

Hi guys.

Dereck could you check this out for me? All the wiring was correct, the programming was perfect, but when the car tries to start, it says, key not recognized and glitch twice when I try to start. I'm not sure if I'm using the correct diode. By the way, the red black wire (starter) is orange black, I'm not sure if this is the correct one either. The transponder wires, one is blue and the other is red, am I opening the blue, or does it not matter? Might you help me? Thank you very much in advance.

Best regards.

https://drive.google.com/drive/folders/16x-fbU40zovZW_PALHmOfIwePzKDa5r9?usp=sharing

Rf411 not responding

Sat, 29 Oct 2022 18:36:28 +0000

I installed an evo one and rf411 in a honda civic 2012 and it worked perfectly while i was installing it. However, while routing the antenna, I removed the cable from the antenna side to make the routing easier and re attached it after. Now the factory remote 3x start works but the rf kit remote is not accepted by the antenna. Also there is no lights coming on the antenna. I tried plugging it in to see if the light comes on, reprogrammed the evo one, tried the antenna button, tried putting the antenna in programming mode but the led doesnt come on at all.

VW Tiguan 2012 not pass key bypass programing.

Fri, 21 Oct 2022 13:02:15 +0000

2012 VW Tiguan, I installing EVO-ALL, used THAR-VW2 diagram, I start with prograning procedure, 1-6 pass,

in stage 7 red light tree times flashing,I reconect wires on OBDII, now it flash twice.

this problem in wiring or programing? thanks.

2014 maxima -evo all during prog. Module car starts when PTS is pressed

Thu, 20 Oct 2022 15:00:44 +0000

I am using the Evo All w/ standalone W/O T-Harness & oem remote 3x for 2014 Nissan Maxima (Push-to-Start). Once all the wires are connected I connect the 4-way link wire into Evo-All and I release the prog. Button once the LED is yellow- now it turns solid yellow- I connect the remaing connectors and press the prog. Button twice and it flashes yellow and once solid yellow again I press the PTS button for the 1st time, which should go ino Acc mode- but the vehicle starts running until I press the PTS button 1x more and fully shuts off. As soon as I disconnect the module the vehicle acts normal - Accesory - Ignition On.

2013 Hyundai Accent

Wed, 07 Sep 2022 21:05:21 +0000

Hi there! I am having the next problem. When installing the Evo one on my 2013 Hyundai Accent the blue programming light turns off when I turn the car on and the light comes back on when I turn it off have the can wires on the right ones do I need the can wires to use the remote start? What options do I need to change the serial number of my evo one is 002B04 247461 The wiring is correct and have verified continuity. Voltages on the CAN wires are roughly 2.35 and 2.65. Could you help me please, what going on? Thanks you

Remote Start Stop Working

Sat, 03 Sep 2022 12:15:43 +0000

I have an EVO All installed with T-Harness in a 2022 Rav4 Hybrid PTS. Everything worked fine till I installed and try to use EVO-START 2. I later noticed that I did not programm the EVO_START 2. I did it and since then it never worked and even the 3x lock remote start stop working.

I also tried to Master Reset. It seems to work while doing it on the module but when I connect the EVO ALL to FLashLink the module is stil programmed. Nothing was reset.

When I start the car, the middle Yellow LED turns on.

SN: 001A0785010

2020 Toyota 86 (PTS) starts for 2 seconds then turns off

Sat, 26 Feb 2022 10:12:56 +0000

I have an automatic 2020 Toyota 86 (PTS) with an EVO-ONE installed. From my knowledge, we have all the wires tapped properly. We ran into a few issues with the immobilizer wire but I believe we got that part sorted out.

To confirm with the immobilizer wire, we cut the yellow immobilizer wire in half, tapped the light blue black and yellow red to the immobilizer wire that's connected to the ECU, and tapped the yellow green to the immobilizer wire that's connected to the other side of the car. Is this correct or should it be flipped? We're not able to aquire the immobilizer data for DCryptor but I think it's because it's not listed as supported on fortin's website, even though we go through the guide and finish with the Yellow and Red lights alternating on the EVO-ONE before attempting to use DCryptor. (Leaves us with a 'No data found' error).

Finally, we installed the antenna for the RFK411 remote and programmed it. When starting the car, it starts for about 2 seconds then turns off. Does anybody know what could be causing this issue?

2014 A4 key port/push start EVO ALL key not programming

Wed, 23 Feb 2022 06:53:52 +0000

Hello!!! i purchaced the EVO RS system for my 2014 A4 key port/ push start. I plugged T-Harness to the key port, tapped into the CAN wires and Brake pedal sensor. I have the EVO ALL module programmed to stand alone function and the current Software on it is 60.10 - recommended. I am trying to programm my key, but when i get to the last step, i am not seeing the red and yellow light alternate. All i get is the red light flashing 3 times.

Has any one had this issue? any suggestions? thank you!

Evo all not starting

Wed, 09 Feb 2022 18:04:13 +0000

I'm not using the idata link so I cut the wires and the red is going to 12v and the black ground. I put the black plug in and it won't cycle through the lights. Please any help appreciated

2012 F250 parking lights flash six times - no start

Sat, 22 Jan 2022 21:14:52 +0000

2012 F250 XLT 6.7L with EVO-ALL service # 001A06 854909 in standalone mode and THAR-FOR4 T-harness and FTX64-2W RF kit. This kit was installed and worked great last year, now this year not working.

Lock and unlock works correctly. Remote start does not work - parking lights and red light on EVO immediately flash six times quickly in a row.

Thanks for any help.

Evo All setting off intrusion alarm and not starting car

Tue, 11 Jan 2022 09:26:01 +0000

I installed a prewired evo all into my 2018 Ford Escape. All programming went just as the instructions said and both factory keys successfully programmed. When I go to tripple lock the car the start it, the accessory power turns on, then the intrusion alarm goes off and the car does not start. How can I resolve this issue?

Is my Module Faulty

Mon, 03 Jan 2022 16:23:46 +0000

Installed EVO ONE on a 2001 Chevrolet Suburban with NO T-harness. Plugged module per procedure, Blue light came on, Plugged in harnesses, released button, no red light came on. Tried several times, troubleshooting says J1850 serial data line not seen. Tested line with scan tool and functioning fine. Checked continuity from OBD connector to module connector - good. Confirmed conection from connector to module pin - good. Looking for input if module is faulty. Please advise.

Regards, Bob____

Subaru Outback pops trunk every few seconds as soon as 20 pin secondary connector is plugged in to module.

Thu, 30 Dec 2021 18:59:38 +0000

I used a t-harness for the install. Programmed according to instructions. As soon as I plug the 20 pin secondary connector the vehicle starts popping the trunk every few seconds and will not remote start or do anything. 2019 Subaru Outback standard key. Evo one with Sub1 and Sub3 t harness. Also have rf kit.

I installed and all thing go perfect expect final step

Tue, 28 Dec 2021 14:51:13 +0000

I installed and all thing go perfect expect final step the light solid on yellow

Keeps unlocking doors as soon as it’s plugged in.

Mon, 27 Dec 2021 14:12:56 +0000

I used a t-harness for the install. Programmed according to instructions. As soon as I plug all connectors in the vehicle starts unlocking the doors every few seconds and will not remote start or do anything. 2019 Subaru Outback standard key. Evo one with Sub1 and Sub3 t harness. Also have rf kit.

2014 Camry fob not working after remote started?

Mon, 20 Dec 2021 14:25:10 +0000

When 3X lock is pressed vehicle starts. Then when started the FOB doesn't work while vehicle is running and have to use the key to enter the vehicle.

I've installed 2 other remote starts in 2013 Corolla and 2016 Tacoma, and after vehicles has started, I can still use the key FOB to unlock the door. I can also click 3X on the lock and shutoff vehicles. But I can't do it with 2014 camry...did I miss a wire? or is this normal operation?

thank you.

When pluging in the data pin to program the led lights fail to come on

Sun, 19 Dec 2021 13:30:39 +0000

installation on ford fusion 2012 no led light on evo

Remote Start not working after programming

Sun, 19 Dec 2021 10:52:38 +0000

Just finished installing the remote starter kit on my 2019 Silverado 1500 LD. Followed all the instructions and everything went exactly as desicribed in the manual. After programming and reinstalling the RS Module, the truck will not remote start. No LEDs lighting up when I push the lock button 3x as instructed.

16 Tundra, Evo Key, no start

Fri, 10 Dec 2021 00:11:37 +0000

Used connection 5, programing 3 in manual. Wires were easy to find, did not use key sense. Believe truck does have a factory alarm (If that matters), it does have a factory keyfob. Programming does what it says it will do. Remote start is a Viper. Everything remote starts fine if I leave the key in the ignition. If I don't, security light blinks and remote start doesnt work. I have the flash link and everything was already updated, and it didn't give me any options to change or adjust anything. Just update.

GWR is connected to the Viper. Only the red light comes on the EVO Key if I remote start it. Is this normal? I'm sure im forgetting something.

2014 VW Tiguan EVO-All EVO-VWT6 TB-VW Starts, and shuts down, shows no key.

Sun, 21 Nov 2021 22:03:28 +0000

2014 Tiguan, Standard Key, using EVO-All, Vwt6, and TB-VW along with THAR-TB-VW. The EVO-All programs fine and has been decrypted. Currently using the Factory FOB to 3x Lock to start. Vehicle starts and then shuts down displaying 'No Key'. No wires have been extended. Everything is connected and triple checked.

2013 vw touareg no start except with brake pedal

Sun, 07 Nov 2021 16:36:52 +0000

sn: 002b04174651

version 60.11

first install was with thar-aud1 that didnt work ignition didnt come on and it was asking to remove key from ignition

second install was wire to wire installation worked fine could program the key ect. tried remote start ignition comes on but no start at first ign on if i touch the brake it would stall soon after at second ign on (on same remote start attempt) it keeps running. verified yellow/red wire to black/red wire all seems ok. i got 12v at black/red if i touch the brake. at one time while trying car start even if yellow/red was connected.

car is a diesel if that matters.

2013 vw touareg ignition key wont come on

Tue, 26 Oct 2021 16:57:57 +0000

Inst with thar aud1 car say to remove ignition key when its in doesnt do it when tharness is unplug

everything was working now its not starting

Fri, 22 Oct 2021 23:46:42 +0000

i just installed an evo one on 2012 nissan versa standard key.im using nis5 t harness with rf442. i installed all the wire except the door lock/unlock vehcile was remote starting with delay the ignition instrument panel lights turn on and click turn off start second time it would start .i removed the evo ground and now when i try to start i see red light flash and hear clicking from evo one with no sucessfull start please help.lock un lock wires are still not connected. im not using door pin and hood pin wire which are grounded to chasis.

Audi Q5 EVO-ALL Standalone worked initially then stopped

Mon, 11 Oct 2021 21:08:57 +0000

I just finished installing the EVO-All in standalone on my 2013 Q5 keyport with t harness. Tested the 3X lock a few times and it worked but now it does nothing. Also I installed the MPC SMartphone control with it and having the same issue. It worked on my phone a few times and now does nothing.

hello evo all w remote starter installed in g37 everything working except the horn and trunk release from the key fob

Tue, 14 Sep 2021 11:17:39 +0000

thank you for your time

charly

2016 Jeep Patriot no start

Sat, 28 Aug 2021 18:46:57 +0000

Bought a Evo-All RS for my 2016 Jeep Patriot, flashed it up to date and wired the yellow to yellow connections. Went to install it, and after programming module to the factory key and all i get is the dash lights up and radio turns on as if it was going to start and then nothing, jeep turns back off and attempts to do it again. Please Help

RFK942 not working after disconnecting and reconnecting the car battery

Sat, 15 May 2021 22:37:04 +0000

After getting the RFK942 working I did some maintenance on the car. I disconnected the battery to perform the maintenance required and after reconnecting the battery I attempted to lock the doors with the RFK942 remote. The remote sent the signal but doors did not lock (LED turned red). I thought that perhaps the antenna needed to be reprogrammed so I attempted to perform the programming procedure again. The antenna would not program (no blue LED) so I connected it to the Flashlink Manager to see if something had been turned off. The Flashlink Manager did not recognized that the antenna was connected. From this I am gathering that the antenna was damaged when I reconnected the car battery. Is this possible? If so, what can I do to prevent this from happening again? Would a different RF kit work better (for example the RF642W)?

Push to Start Takeover without Shutdown

Tue, 13 Apr 2021 17:46:44 +0000

I just installed my Evo-All with the THAR-CHR7. I believe all of the settings are correct, however, when I unlock the car and get in and push the brake the car shuts off. The car is a 2016 Chrysler 200. Thanks

2014 VW Jetta Push to Start won't start

Sat, 27 Mar 2021 14:55:17 +0000

Followed guide 65301. Rechecked wiring everything looks good . Used TBVW. Harness tharvw1. Blue LED flashes with each lock button press. Vehicle does not try to start. Red Led flashes 3 times. Disabled all non essential options on module (hood pin, a6, hand brake, doors, trunk). Anyone have any ideas?

Firmware Version

Wed, 24 Mar 2021 15:52:29 +0000

Hello, how can is see the Firmware of my Evoall ? The SN:001A027 217136

I ve a 2014 Mustang

Audi Q5 Still not remote starting

Tue, 23 Feb 2021 22:58:25 +0000

Completd programming and the decryption process. Key decryption says successful. The blue light flashes when I hit the lock button, but nothing after, car does not start. Is any light supposed to stay on after the 3rd lock button? due to a q/a that stated the blue light not flashing indicates a data buss connection problem, im assuming that the buss connections are ok because my blue light flashes with key fob lock button. noted that the 3rd brake light does not flash with unlocking button pushed. i think it is normal due to not part of the flasher system. brake lights function normally with pedal. could the system be not functioning due to the brake switch tap. can i get confirmation of the correct wire that needs taped from the brake switch. of a way to confirm the input. a picture of the wire that needs taped or at least a wire collor would help.

2012 Audi Q5

Module S/N 001A07152594

Key less entry not working on Audi Q5 after install.

Mon, 22 Feb 2021 14:03:57 +0000

I've installed the Evo-All with the Aud Thar1 T Harness into an 2011 Audi Q5. Do I loose the keyless unlock/lock funtion with the instal? This is the function that when the key fob is on you just your hand grabbing the door handle will unlock (or the button on the handle to lock) the door. Even when the car has not been remote started. I understand the unlock button has to be hit to enter the car when it has been remote started. Thanks.

EVO-ALL sets off viper 5706v alarm

Wed, 03 Feb 2021 14:22:29 +0000

I have installed a EVO-ALL into my 2013 F-150 with a Viper 5706v connected with datalink for the range of the remote, and the 2-way capabilities. Now when I start the vehicle, it immediately sets off the Viper alarm and shuts off the vehicle because the door opened, I believe do to the EVO-ALL RAP disable it seems to simulate opening the door on both startup and shutdown. If I put the viper in Valet mode, disabling the alarm, it works fine, but then I don't have the 2-way of the viper alarm to know when it is going off. I also cannot unlock the vehicle using the viper remote because it sets off the OEM vehicle alarm. If anone know how to fix this issue so I have the Viper alarm still working, please help, I do need RAP disable though, because otherwise my radio will stay on until I open the door.

EDIT: I also have been unable to find a way to connect the Evo-ALL to disarm the factory alarm, I think this would fix the factory alarm issue, it should be able to do it over the can-bus but cannot find and option for this.

Ajout remote ftx5

Mon, 11 Jan 2021 18:51:44 +0000

Comment ajouter une manette ftx5 sur un demarreur?

EVO-ALL THAR-VW3 TB-VW Issues

Mon, 11 Jan 2021 05:38:14 +0000

2012 VW Jetta (Gas) Key Start

EVO-ALL
THAR-VW3
TB-VW

Everything was soldered! Programmed good but it didn't remote start at the first time but the it auto tried the 2nd time, started fine this time and a few times after.. client took the car home.. all good..

1 week later, got a call from the client saying that the remote starter is not working and also wont start normally wiith the key. The only way they got it started was they unhooked the battery and replug it again.

The next day, got another call and client said that the vehicle stopped while driving.. they pulled over and waiting a few minutes and the vehicle started again but engine light came on. Took it to a shop and scanned codes:

Code: B104C29
Description: Key - Implausible Signal
State: Passive/abiogenesis

Code: 00474
Description: Anti-Theft Immobilizer System Control Module
State: No Signal/Communication

I got the vehicle back into the shop.. replaced the EVO-ALL.. double checked all my connections and even used the opposite side of the transponder wire pair.. soldered it and made sure that the TB-VW wire config is going the right way.. programmed fine but now the vehicle remote starts fine on first try!

Guess what.. client called back again after a few days with the same no remote and key start issue.. battery unplug and replug make it work again,

Got the vehicle again and now ths time.. i actually replaced the THAR-VW3 and the TB-VW. Its been 2 weeks now and client hasn't called back yet..

Now... i have to figure out if the T-Harness will cause no start, stall and engine light codes

2015 Toyota Corolla H-Key Without Smart Key Remote Start will start but won't keep it on.

Fri, 11 Dec 2020 18:24:12 +0000

Hi I have an Evo All updated to the lastest firmware as of today (12/11/2020) 79.65 I believe, with all preset options, meaning i did not turn on or off any feature on the Evo All through the FlashLink Manager. To pair with the Evo All I have an Encore E1.

My vehicle is a 2015 Toyota Corolla L H-KEY without smart key (no lock or unluck button on it)

Evo All Installation Guide with Remote Start Unit

https://cdn02.fortin.ca/download/31711/evo-all_ig_reg_bi_toy-corolla_2014-2016_hkey_h_31711.pdf

Encore E1 Installation Manual.

https://encoreautomotivesystems.com/content/pdf/one_sheet_E1_install_manual.pdf

So I have all the Evo All cables connected to the car which are

A20 to 30-pin connector position 16;

A18 to E3 White 40-pin connector position 34;

A10, C3, and C4 to OBD-II connector in its respective positions 7, 6, 14;

Also I have the Encore E1 connecting to the Evo All which are

10 Pin Encore E1 connector -> 20 Pin Evo All connector

White/Red Tachometer -> A12

White/Black Hood Pin -> A15

Black/White Brake Shutdown -> A11

White Ground when Runing bypass output -> A8

Pink Security Disarm Signal -> this is connected to Lt. Green wire in the Driver Kick white connector.

So its missing couple wires to be wireout such as:

Encore E1 10 pin connector

White/Blue Instant Start Input (+) -> which i have no idea what is the purpose of this wire and where to connect.

Gray Channel 3 Trunk Output -> i didnt do it because i dont have a eletronic trunk release, mine is manual pull up type.

Blue/Black ACC2 -> because my vehicle doesnt have a second ACC

Yellow Ignition 3 output -> again because the car doesnt have it.

So, to summarize, the vehicle locks and unlock just as it should through the Encore E1 4-Button remote control, however, the remote start function will turn on the car in the first try but it will only stay on for 5 seconds, then it shut itself off. After, it tries to start it again, and the cycle repeats 1 more time after that, totaling 3 tries. It starts but wont keep on after 5 seconds.

What am i doing wrong? what am i missing here?

I have no idea whats missing or why this is happening. If someone has an idea, please share with me. Thank you so much.

2010 Tiguan +evo All +TB-VW Not working

Wed, 09 Dec 2020 22:54:48 +0000

Hi

I Installing evo all + tb-vw to 2010 Tiguan.All connected is correct ,but problem is programming

step 1-6 is ok and when i hold programming button red light turn on and flash three times ( no blue ,red , yelow)

whats wrong ?? firmware 75.39 and up this same efect.i try used .099 to fix red light on and nothing new

evo all SN 001A07 013053

Lexus IS250 Remote starter not working after programming

Sat, 05 Dec 2020 09:48:55 +0000

Hello All,

I installed a remote starter in lexus is250 2015

connected the 30 pin connector in B harness

and one under steering wheel

The evo all with door lock harness

Used the flash link updater to update firmware

confirmed with evo support that firmware is right.

and then did the programming steps

Now remote doesn't work

Just shows yellow LED when i turn it on with push start

No led blinks when i press the lock button

Any idea what could be wrong ?

2016 Lexus IS200t auto headlights not working after Evo One install

Sat, 10 Oct 2020 00:39:01 +0000

*FIXED: leave option 7 to None on remote starter side

I have the Evo One installed with the THAR-TOY6 T harness. After the installed the auto headlights do not work anymore even when pitch black outside. I have also noticed that the remote start would take 4x lock to remote start. The red LED inside the Evo One will be lit up and the 1 lock will turn it off then the RS will start the car. The biggest issues it the auto headlights. I even added the optional push start wire so install was done to the letter from the instructions. On my trip tonight I .noticed after 20 mins or so the center console light will turn off like of the headlights were off but the headlights were still on actually. It's almost like park light were switched off. Please advise

2016 Jeep Wrangler Viper 4606v evo all

Sat, 12 Sep 2020 00:34:46 +0000

I installed viper 4606v and evo all d2d mode everything working good the problem was the car crank but won't start And start after 2 or three times do you recommend programming tach?

Audi A4 2009 TDI KEYPORT REMOTE START PROBLEM

Mon, 27 Apr 2020 12:10:34 +0000

Remote start not working.
Checked the following options -

Bypass C1 - D6 - D2
Remote starter - 32.6 - 34.3 - 38.2

The unit connects fine, it starts via keyport, decryptor runs fine, when I press the lock button the EVO One flashes, it also flashes when I unlock. Unfortunatley when I press lock x3 it doesnt remote start.

Using T Harness

Completed the wiring, +12v red, Yellow to Clutch, Grey to can orange green, grey black to can orange brown, black to GND, key port connector, red connector, white connector and the evo one loop connector.

Ready mode wont enable

Sun, 15 Mar 2020 17:23:42 +0000

2015 Mitsubishi Lancer Evolution (manual trans). Using an EVO-ONE, I checked all wires and made sure everything was correct the only thing I didnt connect was the motion sensor, I cannot seem to find it in the driver side footwell unless the plug has been changed in later year models. Anyway when trying to remote start the parking lights flash three times, indicating ready mode is not enabled. I have tried all 3 different ways as described in the installation instructions but still does not work.

2009 S4 MANUAL TRANS, NO START AFTER 3X LOCK

Thu, 05 Mar 2020 07:45:30 +0000

Hello,

I have a manual trans Audi s4 2009 keyport Evo One , i have installed the T-harness - yellow line from 6 pin to the clutch bypass (red/blk) in engine bay as per pics, Canbus High and Low installed correctly and the Pink from the 6 pin to the purple/ yellow to convenient ignition out.

I have the module programmed as per intructions and no error. when connect all the plugs and lock the car then try 3x lock to RS nothing happens. I see the module flash with a blue led at every lock and unlock but no ignition.

Evo One S/N 002B04 013291

Thank you in advance!

Stu.