/en/qa/tag/pats-light-flashes Powered by Question2Answer /en/qa/94522/no-crank-start-after-module-replacement-flashing-pats-light December 2015 I installed the EVO-All with the Crimestopper FS-89 remote starter in my 2009 Ford Flex standard key using guide 3318, connection 2A ( soldered ), 2 key program. Install and programming went smoothly and the system worked flawlessly until the summer of 2019. At that time the car wouldn't start with the key. After doing some troubleshooting I found the EVO-All module to be the problem. Once I unplugged it the car would key start normally. So I ordered a new module and installed it using the same programming method as the original install. Programmed with no problem but it will not crank/start the vehicle when remote started and the PATS light flashes. It will remote start if I hold the key transponder near the barrel. I tried all the recommendations advised in the troubleshooting guide on the website. Still no remote start. Ford /en/qa/94522/no-crank-start-after-module-replacement-flashing-pats-light Sun, 05 Jan 2020 05:01:59 +0000