Questions & Answers - Recent questions tagged pilot

2005 Honda Pilot EVO-ONE Omega OL-RF-15-SST no remote start

Mon, 26 Dec 2022 17:25:23 +0000

Hello,

Ive installed an EVO-ONE with Omega OL-RF-15-SST RF Kit into my 2005 Honda Pilot and i have been unable to get the remote start feature to work. Lock/Unlock functionality work using the Omega remote and when i initiate the remote start function, the remote chimes to indicate it transmitted the remote start signal and the lights on my car flash 3 times and the red led on the EVO unit lights up for a second or 2 then goes out but nothing at all happens after that.

Update: After switching from bypass firmware 73.39 and 73.28 the remotes no longer work and the valet switch no longer works either, so i can try to reconfigure the rf kit. I dunno if my unit has a bug and needs to be master reset or what. I also have no rf kit options other than Fortin RF Kits, if that makes any difference. I have tried the suggested remote starter firmware and the OM 0.44 formware for Omega RF kits to no avail. any help would be appreciated.

Bypass service # 002B04253114

Remote Starter Service # 002B07253114

Evo-all not compatible with 2005 Honda pilot

Mon, 12 Dec 2022 16:32:17 +0000

Why does it show that the evo-all remote start function is not available on the 2005 pilot but is available as a function on the evo-one? Is the comparison chart labelled in error? Not sure how the evo-all cannot be used as a standalone remote starter when wanting to use the factory remote

US vs CA Model?

Sat, 19 Feb 2022 13:08:29 +0000

2019 Honda Pilot PTS EVO-ONE THAR-HON8 T Harness Install with takeover. Telling me to plug the grey 12 pin connector on the T Harness to Plug that is located at steering lock module under steering column. I looked this up and only the CA and Mexican built versions of the pilot have this Steering lock module installed. This is not on my Pilot. Can I get a picture of where I am supposed to plug this in if I dont have that module under my steering wheel as I cant find it for the life of me.Im assuming that with the wire thats coming from the EVO-ONE saying its a bypass and it being connected to a steering lock module on the other model, maybe some sort of immobelizer or something? Any help would be super appreciated! Thanks in advance!

Engine doesnt start red light flashes

Thu, 08 Apr 2021 19:27:14 +0000

2014 Honda pilot

2007 Honda Pilot security light flashes after remote start

Mon, 30 Nov 2020 22:01:02 +0000

Using KEY-OVERRIDE-ALL. Programmed fine and remote starts fine, but green key light in dash flashes and stays flashing even after key take-over. Wondering if i missed something.

Enable heated seat on 2012 Pilot

Tue, 14 Jan 2020 10:44:43 +0000

While programming the unit, I found the option to turn on the rear defrost and heated mirros. I did not notice an option for the heated seats. Since the feature is controlled by multiple pushes on a button instead of a hard on/off, it can't be pre-set when exiting the vehicle. Is there a way to control this feature for the driver seat?

Which to purchase for 2014 Honda Pilot EXL?

Tue, 10 Dec 2019 22:42:05 +0000

I'm looking for clarifiction on the installation and requirement differences between using the evo-all with standard installation and the evo-one with standard installation.

2008 Honda Pilot cranks but not starting.

Mon, 11 Nov 2019 11:34:48 +0000

I installed a Viper 4806V and Evo-All Unit on the 2008 Honda Pilot. Followed all the wiring diagrams and instruction. All works except to the part the its cranks only. I followed the Guide # 82931 and flashed the unit before installing. Im using d2d connections and connected only A1, A10 D4 and D6 wires. I followed the programming procedures till step 5 the red light will flash rapidly then leds turns off before i do step 6 the red led is off already before i turn the key to off position.

2005 Honda Pilot w/Evo-One not locking/arming after start

Wed, 21 Nov 2018 23:29:45 +0000

I have installed the Evo-One along with a Crimestopper RFALL642W RF kit. I initially was having an issue where the OEM alarm would go off when I remote started the vehicle. I followed the guide and enabled option D 2 and connected the Purple and Purple/Wht wires along with the Orange Disarm wires.Everything is working as expected, the RF key fob will lock/ulock doors and ulocks/disarms the OEM alarm before start but it will not lock/arm after remote starting. I seen in another thread somone was having a similar issue and you said they could connect the Purple wire with 2 diodes to the LOCK and ARM wires at the same time. Can you please explain exactly how to wire them, where to put the diodes and what direction? And also why you would use them?

Thank you!

Honda-SL3 & Compustar CS800s connection

Thu, 01 Mar 2018 15:11:32 +0000

I'm hooking up a CS800s in a 2007 Honda Pilot. I will be using a Honda-SL3. There is a wire that I'm supposed to connect to the remote start unit, but I cannot figure out where to connect it.

how to do decryption with evo-one and 2005 honda pilot

Tue, 12 Dec 2017 22:54:36 +0000

2005 honda pilot.

followed fortin documents CONNECTION2 and PROGRAM2

remotes are working.

program procedure worked as expected on page 8/10 in fortin docs.

when attempting to start the engine just cranks but wont start.

i suspect its a decryption thing but there is no such option in the FLU software .

unless it has something to do with the "toggle" button? i dont know what that does but

when i click it my EVO-one goes offline and the software says its disconnected.

Honda Pilot 2003

Sun, 05 Nov 2017 16:12:42 +0000

I /purchase-and-started-installing-honda-sl3-bypass-module-my-20O3 Honda Pilot can-that-module-work

Using Drone app to lock/arm car and when using the OEM remote key fob to unlock alarm trigger when opening the door

Thu, 01 Jun 2017 06:22:18 +0000

So I finally got the Evo-one/Drone to work with my 2005 Honda Pilot over the weekend. However while using the Evo-one/Drone app to lock/arm the car and when I use the OEM key remote fob to unlock while opening the door trigger the alarm. When the alarm is trigger can't use the OEM key remote to disarm, only Drone app that was use to arm the car will disarm it.

While I use the OEM key remote fob to lock/arm the car, I can use the Drone app to unlock/disarm the car and able to open the door without trigger the alarm. Is there a setting in the EVO-ONE that I need to change in order for the alarm to turn off when I use the OEM remote to unlock/disarm the car when the Drone app is use first to lock/arm the car? Or is that not possible

Evo One and Drone DR 3400 would not remote Start 2005 Honda Pilot only lock/unlock

Mon, 22 May 2017 09:29:18 +0000

I follow the Guide # 27481 Connection 2 , Programming 2 , also did lock/unlock, Horn, disarm, GWR to Key Sense and foot brake wires. When using the Drone app to start the car it would not start or do anything at all, no parking light flash, no light from the 3 LED beside the red light by the yellow wire cut loop.

When the lock/unlock on the Drone app is press the door would lock/unlock/disarm parking light flash and still no start. I have reset and master reset the module, reprogram, check all the wires and relocate the ground wire still won't start or hear the relay.

Did I not program it right or am I missing some wires connection?

Bypass Firmware version: 73.26

Remote Starter Firmware version: 0.50 Drone

What I have hook up

(6-PIN) POWER CONNECTOR

(+) Ignition Pink to Black/Yellow car (+) Ignition

(+) Starter Yellow to Black/White car (+) Starter

(+) Accessory Orange to Yellow car (+) Accessory

(+) Parking Light White to Red/Black car (+) Parking Light

(+) 12v Red to White car (+) 12v

(6-PIN) BYPASS RELAY

D6 White/Red to Pink (cut) at Ignition barrel going out pin 5 Security Light

D4 White/Green to Pink (cut) at Ignition barrel side of pin 5 Security Light

(20-PIN) SECONDARY CONNECTOR

A1 to (+) Ignition

A2 to (-) Black/Orange car Lock

A3 to (-) Blue/Orange car Unlock

A6 to (-) Pink/Black Disarm

A7 to (-) lt. green/blue Horn

A8 to blue/black Key Sense

A10 to Red/Green Data Pin2

A11 to (+) White/black Brake wire

Would it be better to used RF kit before the Drone, seem the Alarm is working but not the remote start.

Well, right now the Evo one is out of the car so I won’t be able to go at it until the weekend the only time I’m free. Any help would be great or anyone who have done 2005 Honda Pilot Evo One with Drone with some input how you got it to work would be great too.

Thank you,

2005 Honda Pilot Evo one wires

Thu, 18 May 2017 08:42:45 +0000

I'll be doing this installing this weekend and I got most the wire down. Need help with some of the wires. On the 20-pin connector A8 (-)DK.Blue wire look like I have to connect it to Key Sense (Blue/Black) Ignition harness is that correct?

For the arm/disarm I only see A6 (-) Orange for disarm to pink/black behind glove box, green connector but what wires on the 20-pin connector would I use for the arm or do I not need to and will it still arm?

The hood, door and trunk status would I isolate them with diode connect to A15 (-) pink/black wire or other wire I can use? For the door trigger would I wire all 4 door or just one for all the door status.

I would be adding a shock sensor with the evo one and I would be using Drone Mobile DR-3400 for this install.