/en/qa/tag/ram-cummins-diesel Powered by Question2Answer /en/qa/95120/2016-ram-3500-manuel-evo-one-8-seconde-cranking-ne-fonctionne-pas j'ai tenté a plusieur reprisede configurer , le evo-one pour qu'il crank plus longtemps , parlé deja a une personne au telephone me disant de selectionner le mode 20.5  8 second cranking , mais selectionner ou pas , le crank est d'environ 2 seconde et arrete , parfois 1 sur 5 le moteur parvient a demarrer, comment je fais pour pouvoir avoir au moin 5 seconde de cranking , tout le cablage est ok , le ready go est ok juste la programmation qui bug , comme si meme je change les parametre ca fait rien quoi faire ? Ram /en/qa/95120/2016-ram-3500-manuel-evo-one-8-seconde-cranking-ne-fonctionne-pas Tue, 21 Jan 2020 19:06:43 +0000 /en/qa/65603/06-dodge-cummins-options I have an 06 Dodge Cummins Automatic, I have been searching for options for a remote start and ran across a kit that includes: “Crimestopper DS4 Remote Start & Keyless Entry, EVO-Series Bypass w/ Plug-In T-Harness”, Manufacturer Part Numbers: DSPRO4 + EVOCHR5+QC4(D) (2492-4). Will this work or am I barking up the wrong tree? Sorry I’ve been confused with the EVO-ALL, EVO-ONE, and EVO Series stuff. What should I do for this to work properly? Thank you Dodge /en/qa/65603/06-dodge-cummins-options Thu, 03 Dec 2015 12:06:52 +0000 /en/qa/60743/2006-ram-diesel-intake-heater-glow-plug-monitoring Does the Evo-All have the ability to monitor the intake heater (glow plug) for remote starting?  I see that I can set it for diesel mode, which would then delay the start signal for 0/10/20 seconds, but would rather just have it start as soon as the light in the dash turns off if possible.  Thank you! Dodge /en/qa/60743/2006-ram-diesel-intake-heater-glow-plug-monitoring Fri, 23 Oct 2015 18:19:21 +0000 /en/qa/58593/delay-in-engine-crank-while-in-diesel-mode I have the evo all installed on a 2014 ram 2500 with the Cummings and tip start. It is in diesel mode and there is a delay from the third click of the fob to engine crank. My concern is that nothing on the instrument cluster comes on during that time. It only comes on for second before engine crank. There is no delay even on cold mornings. Could it have been an installer error and he programmed it to have no delay. The module number is 001a06447504. I saw on YouTube it can be programmed from 20/10/0 seconds. Ram /en/qa/58593/delay-in-engine-crank-while-in-diesel-mode Sun, 04 Oct 2015 14:50:12 +0000